Upgrade to Superior Performance
with the PerForm 6 Recloser Control
Retrofit Program
An extraordinary opportunity created especially for
Cooper Power Systems customers.
The PerForm 6 retrofit program provides Cooper Power Systems Form 3A,
Form 4A, Form 4C, FXA, FXB, and Form 5 control users the opportunity to
upgrade their recloser controls to the Form 6 control, complete with ProView
application software, at a discounted price.
The advantages of the PerForm 6
Retrofit Program extend beyond
the technology – the burden of
disposing your old control is
eliminated.
Just box it up and send it back
within 90 days – following the
instructions provided in the
PerForm 6 program letter you
receive.
While the protection system design of the these legacy controls is still
applicable today, system optimization now includes additional requirements
such as full power metering; SCADA and DA applications; advanced data
logging through oscillography and event recorder; and extensive user
customization. Feature enhancements continue to be software driven and
downloadable to existing hardware.
Cooper Power Systems offers this recloser control technology at an affordable
price with the PerForm 6 retrofit program. The PerForm 6 retrofit program
enables Cooper Power Systems customers to replace specified legacy recloser
controls with new Form 6 pole mount, yard mount, or triple-single pole mount
controls for a special price with an old Form 3A, Form 4A, Form 4C, FXA, FXB,
or Form 5 control in exchange.
Contact your Cooper Power Systems representative for special pricing
information.
www.cooperpower.com
Cooper Power Systems, ProView, and NOVA are trademarks of Cooper Industries in the U.S. and other countries. You are not permitted to use Cooper trademarks without the prior written consent of Cooper Industries.
©2010 Cooper Industries. All Rights Reserved.
PerForm 6 Retrofit Program
Ordering and Exchange Information
Upgrading to new technology made simple by
Cooper Power Systems.
Follow these Simple Steps to Superior Performance
1.Specify Cooper’s PerForm 6 program as your control retrofit program choice. Build
your part number from the appropriate table:
PerForm6P2AX111111E
Form 6 Pole Mount
Control Catalog
Number Prefix
Control primary power supply code
1 = 120 Vac, 2-wire/240 Vac 3-wire
with extra capacity, 13 amphour battery
2 = 120 Vac, 2-wire/240 Vac 3-wire
with standard 8 amp-hour
battery
3 = 240 Vac, 2-wire with extra
capacity, 13 amp-hour battery
4 = 240 Vac, 2-wire with standard
8 amp-hour battery
PerForm6Y21X111111E
Form 6 Yard Mount
Control Catalog
Number Prefix
Control primary
power supply code
1 = 24 Vdc
2 = 48Vdc/125Vdc
PerForm6TSAX111514E
Form 6 Triple-Single
Pole Mount Control
Catalog Number
Prefix
Control primary power supply code
1 = 120 Vac, 2-wire/240 Vac 3-wire
with extra capacity, 13 amphour battery
2 = 240 Vac, 2-wire with extra
capacity, 13 amp-hour battery
2.Submit your purchase order with the following terms stated: “Buyer (utility name)
accepts a surcharge of $2000.00 for each control not returned in 90 days or if
returned in non-working condition.”
3.When your Form 6 control, PerForm 6 program letter, and packing list arrive,
prepare your retired control for shipment to Cooper Power Systems.
4.Follow the instructions in the letter to fill out the packing list.
5.Box up your retired control and attach the packing list to the outside. Follow the
shipping instructions outlined in the PerForm 6 program letter to send your retired
control back to Cooper Power Systems.
Cooper Power Systems
2300 Badger Drive
Waukesha, WI 53188
P: 877-CPS-INFO
www.cooperpower.com
B280-02026
August 2010 • Supersedes 10/2008
Terms and
Limitations
• All Form 3A, 4A, 4C,
FXA, FXB, and Form 5
controls are eligible for
the PerForm 6 retrofit
program.
• Additional accessories
beyond control base
catalog number
KME6P2A, KME6Y2,
or KNTS6 are added
at list. The Form 6 pole
mount control for use with
control-powered NOVA
reclosers is not included
in the PerForm 6 retrofit
program.
• Cooper Power Systems
reserves the right to
assess a surcharge of
$2000.00 for each control
not returned in 90 days or
returned in non-working
condition.
• Cooper Power Systems
will assume the cost of
returning retired control
units to the factory only
if shipment is returned
via the carrier noted in
the PerForm 6 program
packing list you receive.
• PerForm 6 program
discounts can not be
applied to previous orders
or be combined with other
discounts.
• Cooper Power Systems
reserves the right to
discontinue this program
without further notice.