CYME
Power Engineering Software and Solutions
CYME Basic Training for
Protection Analysis
The CYME basic
training for protection
analysis course covers
the fundamentals on
the analyses and tools
available to design and
validate protection
schemes. This course will
give a “head start” to new
users and will provide a
useful review for current
users.
Schedule Highlights
About the Course
Registration Information
The course is instructed
by CYME personnel who
are thoroughly familiar with
the software products and
techniques applied. Class size
is limited so that each user may
receive personal attention.
Date: March 9, 2015
•
Concepts of the protection
software
•
Graphic user interface
•
Creating studies
•
Adding devices to a study
•
Operations on the one-line
diagram
•
Operations on the plot (time/
current graphic)
•
Performing device coordination
my.cyme.com/events
•
Common device types and
their options
Hotel Reservations:
•
Efficient study building
•
Reports.
•
Other analyses and functions
(capacitor placement, load
balancing, load growth, fault
flow, motor start, distributed
generation, etc.)
All of our courses are taught
using the most recent version of
the software.
Course Language: English
Fee: US $750.
Location:
Eaton Technology Center
3413 N Sam Houston Pkwy W
Suite 212A
Houston, TX 77086, US
Registration to Course:
Houston Marriott North
255 N. Sam Houston Pkwy E.
Reservation Desk: 281-875-4000
Sheraton North Houston
15700 John F. Kennedy Blvd
Reservation Desk: 281-442-5100
Doubletree Hotel Houston/
Intercontinental Airport
15747 John F Kennedy Blvd
Reservation Desk: 281-848-4000
Further Information:
CymeInfo@Eaton.com
This course is open to the current users of
the CYME products.
The course fee includes tuition, lunches,
course material, documentation and access
to a computer for each participant.
For the accomodations, a number of rooms
at a special rate is made available to the
attendees at the proposed hotel. Call the
reservation desk for arrangements and
mention your attendance to this Eaton event.
Registration and Cancellation
Policy
Upon receiving your registration information,
a CYME representative will contact you to
complete the registration process. CYME will
send you an e-mail acknowledging payment
and status. For multiple-attendee registration
on the same form, acknowledgement will
be communicated to the person requesting
the registration. It is advisable to register
at least one month prior to the start date of
the course. Registrations are transferable
within your company at no additional cost.
The registration fee of the course, along
with available discounts, appears on the
course description page. Applicable taxes
if any are not included in the fee. Travel
and accommodation are at the expense of
registrants. For your convenience, CYME
will, in most cases, provide you with the
name and phone number of a recommended
hotel. When a special rate for hotel rooms
is announced, attendees should note that
this rate applies to a fixed number of rooms
and that reservations should be made before
the date specified on the CYME web page
describing the course.
Cancellation of registrations should be
requested in writing, either by mail, e-mail,
or fax. For a request received fifteen days or
more prior to the course start date, CYME
will refund the paid-up fees less US$ 50.00
administration fee per canceling attendee.
For a request received after that date, the fee
is non-refundable.
While CYME makes every effort to meet the
published courses schedule, please note that
CYME reserves the right to cancel or change
the date or location of its courses. CYME’s
responsibility will not exceed the amount of
the fee collected. CYME is not responsible
for the purchase of non-refundable travel
arrangements or accommodations or for
the cancellation/change fees associated
with canceling them. Please contact CYME
to confirm that the course will proceed
as scheduled before confirming travel
arrangements and accommodations.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
CYME International T&D
1485 Roberval, Suite 104
St.Bruno, QC, Canada J3V 3P8
P: 450.461.3655
F: 450.461.0966
P: 800.361.3627 (Canada/USA)
CymeInfo@eaton.com
www.cyme.com
© 2014 Eaton
All Rights Reserved
Printed in Canada
Publ. No. BR 917 050 EN · February 2015
Eaton, Cooper Power Systems and CYME are
valuable trademarks of Eaton in the U.S. and
other countries. You are not permitted to use
these trademarks without the prior written
consent of Eaton.
All other trademarks are property
of their respective owners.