DMVF Series
Compact Fluorescent
Champ® Luminaires
Applications:
DMVF Series Champ Luminaires are used:
• In areas made hazardous by abnormal
conditions resulting in the presence of
flammable vapors or gases
Cl. I, Div. 2, Groups A, B, C, D
Restricted Breathing Cl. I, Div. 2
& Zone 2 (Suffix S826)
Certified for IEC Zone 2
(Suffix S826TB)
5L
Cl. II, Groups E, F, G; Cl. III &
Simultaneous Presence
Marine & Wet Locations
3, 3R, 4, 4X; IP66
Certifications and
Compliances:
• NEC and CEC:
Class I, Division 2, Groups A, B, C, D
Class II, Class III & Simultaneous
Presence (Class I, Division 2 and Class II)
• In areas made hazardous by the
presence of combustible dusts
Class I, Zone 2
• Where combustible dusts and flammable
vapors are present simultaneously
• IEC:
• In marine applications where water
spray and corrosive atmospheres are
considerations
• UL Standards:
• On installations where vibration and
rough usage are problematic
Zone 2 Ex nR IIC
844 Hazardous (Classified) Locations
1598 Luminaires
1598A Marine Locations
• Where a cool, efficient light source is
required
• CSA Standards:
• In areas that require lamps to reach full
illumination immediately
• IEC Standards:
• In refineries, chemical and petrochemical
facilities, grain processing, handling or
storage facilities, manufacturing plants,
wastewater treatment plants, sewage
treatment plants, oil terminals, food
processing facilities, breweries, and any
other manufacturing or processing
facility where safe, reliable, hazardous
area fluorescent or auxiliary lighting is
needed
C22.2 No. 137
Accessories:
Reflectors (to be used with globe)
Type
Cat. #
60079-15
Standard Materials:
Dome
30° Angle
• Ballast housings and mountings –
copper-free aluminum (less than 0.4
of 1%)
To be ordered separately.
• Exterior hardware and guards – stainless
steel
• Reflectors – Krydon fiberglassreinforced polyester
®
Standard Features:
• Housings made of die-cast copper-free
aluminum (less than 0.4 of 1% copper)
for strength and resistance to corrosion
• Hubs are provided with an integral
conduit stop and bushing to help
prevent damage to field wiring during
installation
• Epoxy powder finish and stainless steel
external hardware for resistance to
corrosion
• Long-life gaskets which provide seals
between mounting module, housing, and
optical assembly
• Grounding wire for safety
• Cool operating design
• Optional stainless steel open bottom
guard permits direct access to the globe
for easy relamping
• Optional battery pack ballast for auxiliary
lighting
Standard Finishes:
• Aluminum – gray epoxy powder coat
• Krydon material – high reflectance white
• Stainless steel – natural
Energy Savings
• Less wattage used with compact
fluorescent lamps compared to
equivalent incandescent lamps providing
the same light output
Electrical Rating Ranges:
• Wattage: Two 26, 32, or 42 watt lamps
• 120–277V, 50–60Hz
• 347V, 60Hz
• 12, 24, and 125VDC
5L
• Mounting modules equipped with
integral hub set screws for vibration
resistance (ceiling, pendant, and quad
mounts)
• Globe – heat- and impact-resistant
internally fluted glass
RD739
RA739
Options:
Description
Suffix
Restricted Breathing Construction ................................................................................. S826
Class I, Division 2 & Zone 2 Suitability
Cooler Operating Temperatures (T-Numbers)
Certified for IEC Zone 2 (Suffix S826TB) ........................................................................S826TB
Furnished with
Terminal Block
Crimp Terminals
Factory assembled with lamps installed for additional labor savings ...........................
FA
Fused – to protect ballast against abnormal line conditions (not available on CSA
certified fixtures) (not suitable for marine applications) .................................................
S658
Lamps supplied with fixture...........................................................................................
S714
Top hat with stainless steel threaded insert to attach ballast housing..........................
S806
®
TEFLON coating on globe for increased shatter protection.........................................
S808
Quick-Clip ....................................................................................................................... S890
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1071
5L
DMVF Series
Compact Fluorescent
Cl. I, Div. 2, Groups A, B, C, D
Restricted Breathing Cl. I, Div. 2
& Zone 2 (Suffix S826)
Certified for IEC Zone 2
(Suffix S826TB)
Champ® Luminaires
Mounting
Style
Pendant Mount
Hub
Luminaire
Size (In.) Watts
3
/4
1
/4
1
3
/4
1
52
3
64
/4
/4
3
/4
52
64
84
DMVF2HA052GP
DMVF2HA064GP
DMVF2HA084GP
/4
1
3
/4
1
3
/4
1
52
DMVF2C052GP
DMVF3C052GP
DMVF2C064GP
DMVF3C064GP
DMVF2C084GP
DMVF3C084GP
/4
1
3
/4
1
3
/4
1
52
Flexible Pendant
Mount
3
Ceiling Mount
Thru-Feed
3
Wall Mount
Thru-Feed
DMVF Series
Fluorescent
with G303 Globe
and P33 Guard
Cat. #
DMVF2A052GP
DMVF3A052GP
DMVF2A064GP
DMVF3A064GP
DMVF2A084GP
DMVF3A084GP
84
3
64
84
3
64
84
DMVF2TW052GP
DMVF3TW052GP
DMVF2TW064GP
DMVF3TW064GP
DMVF2TW084GP
DMVF3TW084GP
3
3
/4
/4
3
/4
52
64
84
DMVF25Q052GP
DMVF25Q064GP
DMVF25Q084GP
Stanchion Mount
25° Angle
11/2
11/2
11/2
52
64
84
DMVFJ052GP
DMVFJ064GP
DMVFJ084GP
Stanchion Mount
Straight
11/2
11/2
11/2
52
64
84
DMVFP052GP
DMVFP064GP
DMVFP084GP
5L
Quad-Mount
Pendant, Adjustable
Thru-Feed, 25° Angle,
121/ 2° Angle
1.
Catalog numbers are basic numbers. Voltages must be specified.
STANDARD VOLTAGE BALLASTS
NEC/UL & CEC/CSA (cUL)
CEC/CSA (cUL)
Voltage
Suffix
1072
120–277V 50–60Hz
/UNV
www.crouse-hinds.com
US: 1-866-764-5454
347V 60Hz
/347
CAN: 1-800-265-0502
OPTIONAL BALLASTS
125V DC
/125VDC
12V DC
/012VDC
24V DC
/024VDC
Copyright© 2013 Eaton’s Crouse-Hinds Business
Cl. II, Groups E, F, G; Cl. III &
Simultaneous Presence
Marine & Wet Locations
3, 3R, 4, 4X; IP66
5L
DMVF Series – Ordering by Components
DMVF luminaires are available in components.
A complete
I.
II.
III.
luminaire consists of:
Champ Cover (Mounting Module)
DMVF Ballast Housing
Globe, Globe Guard, Globe Reflectors
I. Champ Cover (Mounting Module):
Type
Pendant Mount
Conduit
Cat. #
/4"
1
APM2
APM3
Flexible Pendant
3
/4"
HPM2
Ceiling
3
/4"
1
CM2
CM3
Wall
3
/4"
1
TWM2
TWM3
3
Stanchion - 25 Degree Angle
11/2"
JM5
Stanchion - Straight
11/2"
PM5
Quad-Mount
3
/4"
QM25
II. Ballast Housings:
Complete catalog number must have the voltage suffix (UNV shown) and any
options suffixes.
Lamp Type
Compact Fluorescent
Lamp Watts
Cat. #
2 (26W)
2 (32W)
2 (42W)
DMVF052/UNV
DMVF064/UNV
DMVF084/UNV
III. Globe, Guards and Reflectors:
Cat. #
Globe
Teflon Coated
Globe Guard
Globe Reflector-Dome
Globe Reflector-Angle
G303
G303S808
P33
RD739
RA739
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
5L
Type
Copyright© 2013 Eaton’s Crouse-Hinds Business
1073
5L
DMVF Series
Compact Fluorescent
Family Tree
5L
Champ® Luminaires
*These plastic reflectors are for non-hazardous areas only (50-100W max).
1074
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
DMVF Series
Compact Fluorescent
5L
Temperature Performance Data
Weights
Champ® Luminaires
Temperature Performance Data:
Lamp
Watts
Minimum
Operating
Temperature
Maximum
Ambient
Temp.
Fluorescent: DMVF
Class I
Non-restricted
Restricted
Breathing
Breathing
Div. 2
Class II
Simultaneous Presence
Non-restricted
Restricted
Breathing
Breathing
Zone 2 or
Div. 2
Division 1
Cl. I, Div. 2/Cl. II
Cl. I, Zone 2 or
Div. 2/Cl. II
Supply
Wire °C
52 Watt
–20°C (4°F)
40°C (104°F) T3
T6
T6
T3/T6
T6
60
64 Watt
–20°C (4°F)
40°C (104°F) T3
T6
T6
T3/T6
T6
60
84 Watt
–20°C (4°F)
40°C (104°F) T3
T6
T6
T3/T6
T6
60
Net Luminaire Weights:
Luminaire
Series
Luminaire
with Globe,
Guard (lbs.)
Lamp
Watts
181/4
Lbs.
DMVF
52, 64, 84
Type
Add for mounting modules:
Pendant
Flexible Pendant
Ceiling
Wall
Quad-Mount
Angle Stanchion
Straight Stanchion
11/4
11/2
23/4
41/2
31/2
31/2
41/2
Add for reflectors:
Dome
11/4
30° Angle
Deduct: 1 lb. for luminaire with P33 Guard
13/4
5L
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1075
5L
DMVF Series
Compact Fluorescent
Photometric Data
Champ® Luminaires
Note: For 52 watt DMVF applications, use a .75 multiplier.
For complete 84W IES files, please log onto www.crouse-hinds.com and go
to Resources > Specification and Design Support > Photometric Files.
DMVF Photometric Data
Isofootcandle Chart:
Luminaire with globe and dome reflector
DMVF064GRD Dome Reflector
DMVF064GRD Dome Reflector
Coefficient of Utilization
Effective Floor Cavity Reflectance 20%
Eff.
Ceil.
5L
Footcandle Values for
Isofootcandle Lines
Mtg.
Hgt.
A
B
C
D
E
8'
10'
12'
16'
4.00
2.56
1.78
1.00
2.00
1.28
0.89
0.50
1.00
0.64
0.44
0.25
0.50
0.32
0.22
0.13
0.25
0.16
0.11
0.06
Room Cavity Ratio
Wall
1
2
3
4
5
6
7
8
9
10
80*
50*
30*
10*
.741
.694
.652
.617
.548
.491
.524
.445
.382
.452
.370
.308
.396
.314
.254
.351
.271
.214
.314
.237
.183
.283
.210
.159
.258
.188
.140
.236
.169
.125
70*
50*
30*
10*
.722
.679
.640
.601
.537
.483
.510
.437
.378
.440
.364
.305
.386
.309
.252
.342
.267
.212
.307
.234
.182
.277
.207
.158
.252
.185
.139
.231
.167
.124
50*
50*
30*
10*
.686
.650
.617
.570
.516
.470
.484
.421
.369
.418
.351
.299
.367
.299
.247
.326
.259
.209
.293
.227
.180
.265
.202
.155
.242
.181
.138
.223
.163
.123
30*
50*
30*
10*
.653
.623
.596
.542
.497
.457
.460
.406
.361
.398
.340
.293
.350
.290
.243
.311
.251
.206
.280
.221
.177
.254
.197
.154
.233
.176
.136
.214
.160
.121
.50*
30*
10*
0*
.622
.598
.576
.557
.516
.478
.444
.424
.437
.392
.352
.332
.379
.329
.287
.267
.333
.271
.239
.220
.297
.244
.203
.184
.268
.215
.175
.157
.244
.192
.152
.136
.224
.172
.135
.119
.206
.156
.120
.105
10*
0*
*Percent Reflectance.
1076
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
DMVF Series
Compact Fluorescent
Dimensions
5L
Champ® Luminaires
Dimensions
In Inches:
Pendant Mount
Quad-Mount
25° Angle Stanchion Mount
Wall Mount
5L
Ceiling Mount
Ceiling Mount – Top View
Straight Stanchion Mount
Luminaire with Globe, Guard, Reflectors
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1077