J
SECTION
J
SECTION
1
EATON 2014 Arrow Hart Buyers Guide
www.eaton.com
www.arrowhart.com
www.eaton.com
www.arrowhart.com
J
SECTION
Hospital Grade
Devices
Table of contents
CuVerro® devices
J-2
J-24
LED accent lights
CuVerro® specification grade AC switches
J-5
Vertical louvered faceplate
J-24
CuVerro® specification grade wallplates
J-6
Vertical scoop faceplate
J-24
Horizontal louver faceplate
J-24
Hospital grade families
J-7
ArrowLink modular connectors
J-8
Special use wallplates
J-25
Tamper resistant
J-10
Pre-marked standard size
J-25
Build-to-spec
J-10
Pre-marked mid-size
J-25
Straight blade receptacles
J-11
Hospital grade protection devices
J-15
GFCI receptacles
J-16
Surge protection receptacles
J-16
Isolated ground receptacles
J-17
Straight blade plugs & connectors
J-18
Power-lock devices
J-22
Power-lock receptacles
J-23
Power-lock plugs & connectors
J-23
www.eaton.com
www.arrowhart.com
EATON 2014 Arrow Hart Buyers Guide
J-1
J
CuVerro® antimicrobial copper surfaces
Made with CuVerro® antimicrobial copper surfaces
SECTION
The Arrow Hart line of switches and wallplates featuring EPA registered
CuVerro® antimicrobial copper surfaces that, when cleaned regularly, deliver
continuous and ongoing antibacterial+ action, remaining effective in killing
greater than 99.9% of bacteria+ within 2 hours
Why clean is critical?
Healthcare facilities
Educational facilities
Challenge:
Hospital acquired infections (HAI’s) are a
growing concern among
hospitals everywhere
•
1 in 20 patients contract an HAI causing
up to 100,000 deaths each year1
•
Approximately $45 billion is spent annually
for treatment of HAI’s1
Commercial kitchens & hospitality†
Solution:
Arrow Hart products made with CuVerro®
touch surfaces that, when cleaned
regularly, continuously kill bacteria+ left
behind by dirty hands, killing more than
99.9% of bacteria+
within 2 hours
•
CuVerro® is an EPA registered copperbased alloy that helps to inhibit buildup
and growth of bacteria+ within 2 hours of
exposure between routine cleaning and
sanitizing steps
•
EPA testing conducted under Good
Laboratory Practices has shown that copper alloys significantly and consistently
reduce the amount of bacteria+ living on
high-touch surfaces
•
From healthcare settings to educational,
hospitality and public facilities, when
cleaned regularly, CuVerro® continuously
reduces bacteria+ contamination, achieving 99.9% reduction within 2 hours of
exposure
Outbreaks can and do happen outside of
healthcare facilities
•
Foodborne disease causes approximately
76 million infections contributing
to 5,000 deaths annually2
•
Educational facilities and public buildings
provide ideal conditions for
spreading infectious bacteria2
+
Laboratory testing shows that, when cleaned regularly, CuVerro® antimicrobial copper
surfaces kill greater than 99.9% of the following bacteria within 2 hours of exposure: MRSA,
Staphylococcus aureus, Enterobacter aerogenes, Pseudomonas aeruginosa, and E. coli
O157:H7. CuVerro® antimicrobial copper surfaces are a supplement to and not a substitute for
standard infection control practices and have been shown to reduce microbial contamination,
but do not necessarily prevent cross contamination; users must continue to follow all current
infection control practices, including those practices related to cleaning and disinfection of
environmental surfaces. CuVerro® is a registered trademark of GBC Metals, LLC and is used
with permission, CW-0013-1207.
++
EPA Registration Number 85353-5 (7600CUR Series) and 85353-3 (7600CU Series)
Not approved for direct food contact or food packaging uses.
(1) Centers for Disease Control and Prevention (CDC) October 2009.
(2) Centers for Disease Control and Prevention (CDC) October 2000.
†
Compliances, specifications and availability are subject to change without notice.
J-2
EATON 2014 Arrow Hart Buyers Guide
www.eaton.com
www.arrowhart.com
J
CuVerro® antimicrobial copper surfaces
Cleaner environments
SECTION
CuVerro® surfaces continuously reduce bacterial+ contamination,
achieving 99.9% reduction within 2 hours of exposure
What is CuVerro®?
CuVerro® is a new type of touch surface material
designed specifically for areas where cleanliness
is a concern.
•
When cleaned regularly, kills more than 99.9%
of bacteria+ within 2 hours and continues to kill
99% of bacteria+ even after repeated contamination
•
Registered by the U.S. Environmental Protection
Agency (EPA) as a surface that continuously
kills bacteria+ within 2 hours
•
100% copper-based alloy
•
Professional medical grade appearance that
is tarnish resistant
•
Poses no threat to human health
•
Continuously kills bacteria+ between touches
and regular cleanings
EPA test 1: Kills pathogens within 2 hours
CuVerro®’s performance on methicillin-resistant Staphylococcus aureus (MRSA) compared with the ubiquitous
stainless steel and a popular silver coating. The tests were conducted at a typical room condition using good
laboratory practices. Greater than 99.9% of the MRSA are killed on CuVerro® surfaces within two hours. But, even
after 24 hours, nearly 10 million colony forming units (CFU’s) of MRSA are still alive on the silver-coated surfaces.
MRSA survival on CuVerro® stainless steel & silver-coated surfaces
Compliances, specifications and availability are subject to change without notice.
www.eaton.com
www.arrowhart.com
EATON 2014 Arrow Hart Buyers Guide
J-3
J
CuVerro® antimicrobial copper surfaces
Same style & durable quality now with CuVerro® antimicrobial copper surfaces
SECTION
The Arrow Hart line of devices featuring CuVerro® antimicrobial copper surfaces, offer
specification grade switches and wallplates in multiple gangs and configurations
Features & benefits
Wallplates & switches with CuVerro®
antimicrobial copper surface
•
Touch surfaces constructed of EPA
registered++ CuVerro® antimicrobial copper
•
When cleaned regularly, delivers
continuous and ongoing antibacterial
action, remaining effective in killing greater
than 99.9% of bacteria+ within 2 hours
•
Unlike coatings, CuVerro® surfaces
are wear resistant and the durable
antibacterial+ properties will remain
effective for as long as the product
remains in place and is used as directed
•
Tarnish resistant with minimal color
change over time
•
Surfaces should be cleaned to regular
protocols
•
Durable enough for hospital grade
cleaners
AH1221CU
93071CU
7601CUR
93401CUR
+
Footnote on Page J-2
EPA registration number 85353-5 (7600CUR Series) and 85353-3 (7600CU Series)
++
Compliances, specifications and availability are subject to change without notice.
J-4
EATON 2014 Arrow Hart Buyers Guide
www.eaton.com
www.arrowhart.com
J
CuVerro® antimicrobial copper surfaces
Specification grade AC switches
SECTION
Product description
Single-pole, double-pole, 3-way, 4-way
15A, 120/277 V/AC; 20A, 120/277 V/AC
Commercial grade decorator switches with CuVerro® antimicrobial copper surfaces
Features
7601CUR
•
Touch surfaces constructed of EPA registered++
CuVerro® antimicrobial copper
•
When cleaned regularly, CuVerro® antimicrobial
copper surface delivers continuous and ongoing
antibacterial+ action, remaining effective in killing
greater than 99.9% of bacteria+ within 2 hours
•
CuVerro® antimicrobial copper alloy helps inhibit
buildup and growth of bacteria+ within 2 hours
of exposure between routine cleaning and
sanitizing steps
•
Welded construction provides superior assembly
security under heavy use
•
Tapered back wire openings handle multiple
wire sizes and types for applications up to #10
AWG solid or stranded wire
•
Stippled line and ground contacts ensure solid
contact; ground screw clamp provides secure
wiring and reduces installation time
•
Tarnish resistant with minimal color change
over time
Decorator switches
A
7601CU
Rating
V/AC
15
120/277
Description
Color suffix
Single-pole decorator switch w/ CuVerro® paddle
CU, CUR
7601__
3-Way decorator switch w/ CuVerro paddle
CU, CUR
7603__
4-Way decorator switch w/ CuVerro® paddle
CU, CUR
7604__
Single-pole decorator switch w/ CuVerro® paddle
CU, CUR
7621__
Double-pole decorator switch w/ CuVerro® paddle
CU, CUR
7622__
3-Way decorator switch w/ CuVerro paddle
CU, CUR
7623__
4-Way decorator switch w/ CuVerro® paddle
CU, CUR
7624__
®
20
120/277
®
Catalog no.
Toggle switches
AH1221CUR
Rating
V/AC
Description
Color suffix
20
120/277
Single-pole switch w/ CuVerro® toggle
CU, CUR
AH1221__
20
120/277
Double-pole switch w/ CuVerro toggle
CU, CUR
AH1222__
20
120/277
3-Way switch w/ CuVerro® toggle
CU, CUR
AH1223__
20
120/277
4-Way switch w/ CuVerro® toggle
CU, CUR
AH1224__
A
®
Catalog no.
Compliant with: cULus & FULS
AH1221CU
Color ordering information:
For ordering devices, include Catalog no. followed by the Color suffix: CU (White Bronze) CuVerro® ONLY, CUR (Rose) CuVerro® ONLY
CU
CUR
(White Bronze)
(Rose)
+
Footnote on Page J-2
EPA registration number 85353-5 (7600CUR Series) and 85353-3 (7600CU Series)
Material characteristics: Environmental: Flammability meets UL94 requirements, V2 rated.
Temperature rating: -20ºC to 60ºC (-4ºF to 140ºF) Specification information: CuVerro® switches E-42
++
Compliances, specifications and availability are subject to change without notice.
www.eaton.com
www.arrowhart.com
EATON 2014 Arrow Hart Buyers Guide
J-5
J
SECTION
CuVerro® antimicrobial copper surfaces
Specification grade wallplates
Product description
Standard size
Toggle, single & duplex receptacle,
Decorator, blank box-mounted
Specification grade wallplates with CuVerro® antimicrobial copper surfaces
Features
93072CUR
93401CU
93101CUR
93403CU
•
Touch surfaces constructed of EPA registered++
CuVerro® antimicrobial copper
•
Stamped from 0.032" (0.81mm) thick
CuVerro® antimicrobial copper surfaces
•
When cleaned regularly, CuVerro® antimicrobial
copper surface delivers continuous and ongoing
antibacterial+ action, remaining effective in killing
greater than 99.9% of bacteria+ within 2 hours
•
Superior non-corrosive and non-magnetic
properties for applications needing
protection from those elements
•
•
CuVerro® antimicrobial copper alloy helps inhibit buildup
and growth of bacteria+ within 2 hours of exposure
between routine cleaning and sanitizing steps
Tarnish resistant with minimal color change
over time
Wallplates
Configuration
Description
Color suffix
1-Gang
Toggle wallplate with CuVerro®
CU, CUR
93071__
2-Gang
®
Toggle wallplate with CuVerro
CU, CUR
93072__
3-Gang
Toggle wallplate with CuVerro®
CU, CUR
93073__
4-Gang
Toggle wallplate with CuVerro®
CU, CUR
93074__
1-Gang
Single receptacle wallplate with CuVerro
CU, CUR
93091__
1-Gang
Duplex receptacle wallplate with CuVerro®
CU, CUR
93101__
2-Gang
Duplex receptacle wallplate with CuVerro®
CU, CUR
93102__
3-Gang
Duplex receptacle wallplate with CuVerro
CU, CUR
93103__
1-Gang
Decorator wallplate with CuVerro®
CU, CUR
93401__
2-Gang
Decorator wallplate with CuVerro®
CU, CUR
93402__
3-Gang
Decorator wallplate with CuVerro®
CU, CUR
93403__
4-Gang
Decorator wallplate with CuVerro
CU, CUR
93404__
1-Gang
Blank box-mounted wallplate with CuVerro®
CU, CUR
93151__
2-Gang
Blank box-mounted wallplate with CuVerro®
CU, CUR
93152__
3-Gang
®
Blank box-mounted wallplate with CuVerro
CU, CUR
93153__
4-Gang
Blank box-mounted wallplate with CuVerro®
CU, CUR
93154 __
®
®
®
Catalog no.
Color ordering information:
For ordering devices, include Catalog no. followed by the Color suffix: CU (White Bronze) CuVerro® ONLY, CUR (Rose) CuVerro® ONLY
CU
CUR
(White Bronze)
(Rose)
+
Footnote on Page J-2
EPA registration number 85353-5 (7600CUR Series) and 85353-3 (7600CU Series)
Material characteristics: Temperature rating: -40ºC to 70ºC (-40ºF to 158ºF) Specification information: CuVerro® wallplates K-22
++
Compliances, specifications and availability are subject to change without notice.
J-6
EATON 2014 Arrow Hart Buyers Guide
www.eaton.com
www.arrowhart.com
J
Hospital grade families
Reliable healthcare device solutions
SECTION
Arrow Hart specification grade and hospital grade devices deliver
the innovation, performance, construction, and design advantages
demanded in medical services environments
CuVerro® devices
The Arrow Hart line of
devices featuring CuVerro®
antimicrobial copper surfaces,
offer specification grade switches
and wallplates in multiple gangs
and configurations.
Hospital grade straight blade
receptacles
Our hospital grade receptacles
fulfill the demand for long-term
reliability, low maintenance and
assured performance in any of
Arrow Hart’s broad line of duplex,
decorator, single, panel mount
and isolated ground receptacles.
Hospital grade straight blade
plugs & connectors
Arrow Hart hospital grade plugs
& connectors are available in
both the safety grip and auto
grip styles, and are built tough to
withstand physical and chemical
abuse and deliver dependable
electrical continuity.
Hospital grade GFCI
& SPD devices
Choose Arrow Hart shock sentry
GFCIs or tamper resistant GFCIs
to protect personnel, patients and
children from the risks of electric
shock. Our surge protection and
isolated ground receptacles offer
dependable protection for today’s
sensitive electronic equipment.
Power-lock hospital use
& mobile x-ray devices
Designed to fulfill the
requirements of hospital
standards for noninterchangeability with
regular wiring devices
and the added safety of
energizing within a sealed
chamber, Arrow Hart offers
power-lock devices that
are available in 20A, 50A
& 60A configurations for
hospital use and mobile
x-ray equipment.
LED accent lights
Arrow Hart’s innovative LED
accent lights with advanced
LED technology provide functional,
yet aesthetically pleasing task
lighting or pathway illumination
that can stand up to tough abuse
in interior and exterior applications
throughout healthcare facilities
- from patient rooms to outdoor
landscapes.
Compliances, specifications and availability are subject to change without notice.
www.eaton.com
www.arrowhart.com
EATON 2014 Arrow Hart Buyers Guide
J-7
J
ArrowLink modular connectors
SECTION
ArrowLink SPD benefits
Arrow Hart’s factory terminated ArrowLink system
revolutionizes device installation, unleashing ground
breaking labor savings in installation and maintenance by
eliminating traditional pigtailing, terminal connections and
taping. Use ArrowLink on your next job to reduce labor
costs, eliminate installation errors, save money and win!
Features & benefits
Color coded terminals
for consistent, reliable
connections
Cut-away of
MCR300FTPI
Push-in terminal
Durable polycarbonate
housing
Ease of installation:
No more twist-on wire
connectors
Terminal accommodation
#12-#14 AWG, solid only
Copper alloy contacts for
superior wire retention
and minimized heat rise
6", #12 AWG ground
lead with ring terminal
and captive ground screw
Cut-away of
MCR300FTST
Screw terminal
50% Time savings:
SPD accelerates both rough-in
& trim out installation
Color coded terminal
screws guard caps
Color coded terminal
screws
Terminal accommodation
#12-#14 AWG, solid or
stranded
­­­Efficient design:
Low profile connection with
feed-through capability
How to order
1. Select a device to ArrowLink
enable. Catalog pages identify
available products-simply add an
“M” to the catalog number and the
devices will be factory enabled with
the ArrowLink device-side connection.
(For GFCIs add “MOD” suffix)
2. Choose from leaded
or unleaded ArrowLink
connector versions in
screw-down or push-in
models.
3. Place your order
and get your ArrowLink
devices in bulk packed
boxes, shipped within 5 days
of receipt of order!
30% Reduction
in wire volume inside the box
Compliances, specifications and availability are subject to change without notice.
J-8
EATON 2014 Arrow Hart Buyers Guide
www.eaton.com
www.arrowhart.com
J
ArrowLink modular connectors
ArrowLink SPD comparative labor savings analysis
SECTION
Traditional pigtail installation
4:55/Receptacle
Total time required to
install 500 pigtail devices:
0:50
1:50
1:10
Cutting &
Install wire
stripping pigtails connectors
1:05
Terminate
conductors
40.97 Hours
Mount
devices
ArrowLink SPD installation
2:25/Receptacle
Total time required to install
500 ArrowLink SPD devices:
20.13 Hours
1:15
Terminate
conductors
0:05
1:05
Attach
device
Mount
devices
Time saved with SPD
20.84 Hours
Leaded ArrowLink receptacle connectors
Device type
Description
Receptacle
Catalog no.
Solid wire leads – 125V
MCR125SOL
Stranded wire leads – 125V
MCR125STR
Solid wire leads– 250V
MCR250SOL
Stranded wire leads – 250V
MCR250STR
MCR125STR
Leaded ArrowLink connector
ArrowLink SPD receptacle connectors
Device type
Description
Receptacle
Catalog no.
Screw terminal
MCR300FTST
Screw terminal, no ground conductor
MCR300FTSTNG
Push-in
MCR300FTPI
Push-in, no ground conductor
MCR300FTPING
MCR300FTST
Screw terminal
ArrowLink accessories
Device type
Description
Circuit tester
Tests receptacle & ArrowLink connectors
Catalog no.
ALTESTER
MCR300FTPI
Push-in terminal
ALTESTER
Circuit tester
Compliances, specifications and availability are subject to change without notice.
www.eaton.com
www.arrowhart.com
EATON 2014 Arrow Hart Buyers Guide
J-9
J
Hospital grade device options
SECTION
Tamper resistant, weather resistant, and tamper & weather resistant receptacles
How the tamper resistant system works:
Shutters restrict access in closed position.
“TR” mold mark
provides quick
visual confirmation
of tamper resistance
when installed.
Insertion of object in any one side will not
open shutters.
Insertion of two-bladed plug or grounding plug
will open shutters.
Both the “TR" mold mark
and “WR" identifier are
clearly visible in the finished installation, indicating double-layer protection for maximum safety.
“WR" identifier quickly
indicates during
inspections that a
weather resistant
receptacle has
been installed.
A) 2014 NEC – 517.18 (C)
B) 2014 NEC – 406.12 (B) TR for
Pediatric locations
guest rooms and guest suites
Receptacles located within the rooms,
All nonlocking type, 125V, 15- and
bathrooms, playrooms, activity rooms and
20-amp receptacles located in guest
patient care areas of pediatric wards shall
rooms and guest suites shall be
be listed under tamper resistant or
listed tamper resistant receptacles.
employ a listed tamper resistant cover.
C) 2014 NEC – 406.9 (A) (B)
Receptacles in damp or wet locations
All 15- and 20-amp, 125- and 250-volt
non-locking receptacles installed in wet
or damp locations shall be weather
resistant receptacles.
Build-to-spec
For receptacles, switches, GFCIs & SPD devices
Modified at the factory to improve efficiency and speed production at the job site. Arrow Hart’s build-to-spec program provides
customized device solutions to simplify your project and maximize your bottom line.
Build-to-spec
sample number: 8300BLS
PSOL
8300BLS
X
Z
G
P
NNote:
Arrow Hart 20A
125V NEMA 5-20
blue SPD surge protection receptacle,
with wire leads and
push-in connectors,
without mounting
screws, ears, or
grounding clip.
Base catalog number
(including device color)
Remove mounting screws
Remove ears
Add 6” leads
PSOL = #12 AWG solid
PSTR = #12 AWG stranded
Remove ground clip
Add push-in connector**
**For use with leaded devices only. Add “PSOL” to back of device catalog number for 6" of #12 AWG solid or “PSTR” for 6" of #12 AWG stranded. (Example: 8300BLSPSOL +
build to spec option­­s).
All devices are bulk packed 50 pieces per carton. Minimum order quantity is 100 pieces. Orders under 500 pieces ship within 5 days with larger quantities typically within 10 days.
Compliances, specifications and availability are subject to change without notice.
J-10
EATON 2014 Arrow Hart Buyers Guide
www.eaton.com
www.arrowhart.com
J
Straight blade receptacles
Performance, longevity, reliability
SECTION
In today’s healthcare environment the power to save
lives begins with the electrical system. Downtime is not an option
and the right receptacle can make the difference in critical situations
Premium hospital grade AH8200, AH8300 series features & benefits
Exclusive screw
terminal guards
provide insulation from
conductive surfaces
Back wire ground
clamp for fast and
secure wiring
Patented screw catch
speeds wallplate
installation
Solid 1-piece
nickel-plated brass
grounding system
assures ground
integrity
Exclusive 5-leaf nickelplated solid brass
blade contacts provide
consistent performance
and superior plug
retention
Extra-long mounting
strap helps secure
installation in poorly
cut wall openings
Front view
Back view
Additional features & benefits
•
Available in 15A & 20A duplex & single configurations, including
lighted, tamper resistant and ArrowLink modular styles
•
High impact- and chemical-resistant nylon face holds
structural integrity
•
Glass-filled nylon base provides superior strength and
heat resistance
•
Tri-head combination brass terminal screws are backed out
and ready to wire
•
Convenient built-in #10 and #12 AWG wire strippers
Compliances, specifications and availability are subject to change without notice.
www.eaton.com
www.arrowhart.com
EATON 2014 Arrow Hart Buyers Guide
J-11
J
Straight blade receptacles
Hospital grade straight blade receptacles
SECTION
Product description
2-pole, 3-wire grounding
15A, 125V/AC; 20A, 125V/AC
NEMA 5-15R, 5-20R
Premium hospital grade receptacles
1.32"
(33.5mm)
A
Rating
V/AC
15
125
NEMA
Description
Color suffix
5-15R
Duplex receptacle, back & side wire
B, GY, RD, V, W
AH8200__
•
Illuminated duplex receptacle, back & side wire
V, W
AH8200LT__
•
Single receptacle, back & side wire
B, GY, V, W
8210
•
•
•
Duplex receptacle, back & side wire
B, BK, GY, LA, RD, V, W
AH8300__
•
•
•
Illuminated duplex receptacle, back & side wire
RD, V
AH8300LT__
•
Single receptacle, back & side wire
B, RD, V, W
8310__
•
•
•
•
•
4.19"
(106.4mm)
3.28"
(83.3mm)
20
125
5-20R
0.88"
(22.4mm)
AH8200
Catalog no.
•
•
•
•
Premium decorator hospital grade receptacles
1.32"
(33.5mm)
A
Rating
V/AC
15
3.28"
(83.3mm)
1.98"
(50.3mm)
20
125
125
NEMA
Description
Color suffix
5-15R
Duplex receptacle, back & side wire
GY, RD, V, W
8262__
•
Illuminated duplex receptacle, back & side wire
V, W
8262LT__
•
Duplex receptacle, back & side wire
B, BK, GY, RD, V, W
8362__
•
Illuminated duplex receptacle, back & side wire
RD, V, W
8362LT__
•
5-20R
2.38"
(60.3mm)
Catalog no.
•
•
•
•
Isolated ground premium hospital grade receptacles
0.83"
(21.1mm)
8310
A
Rating
V/AC
15
3.28"
(83.3mm)
20
4.19"
(106.4mm)
125
125
NEMA
Description
Color suffix
5-15R
IG duplex receptacle, back & side wire
GY, RD, RN, V, W
IG8200__
IG single receptacle, back & side wire
RN
IG8210*
IG decorator duplex receptacle, back & side wire
GY, RN, V, W
IG8262__*
•
•
•
IG duplex receptacle, back & side wire
GY, RD, RN, V, W
IG8300__
•
•
•
IG single receptacle, back & side wire
RN
IG8310*
IG decorator duplex receptacle, back & side wire
GY, RN, V, W
IG8362__
5-20R
Catalog no.
•
•
•
•
•
•
•
•
*Not Fed. Spec.
IG8362
0.88"
1.32" (22.4mm)
(33.5mm)
1.30"
(33.02mm)
USB charger with hospital grade tamper resistant receptacle
Receptacle Rating USB Rating
A
V/AC Amp
V/DC
Description
Color Suffix
15
125
2.1
5
USB Charger with Hospital Grade
Tamper Resistant Duplex Receptacle
GY, LA, RD, V, W
Catalog No.
TR8245__
20
125
2.1
5
USB Charger with Hospital Grade
Tamper Resistant Duplex Receptacle
GY, LA, RD, V, W
TR8345__
4.19"
(106.42mm)
3.28"
(83.31mm)
TR8345
1.47"
(33.33mm)
Color ordering information:
For ordering devices, include Catalog no. followed by the Color suffix: B (Brown), BK (Black), GY (Gray), LA (Light Almond), RD (Red),
RN (Orange), V (Ivory), W (White)
Specification information:
Premium HG receptacles: A-26
ArrowLink premium HG
Receptacles: A-30 & A-31
Isolated ground premium HG
receptacles: A-27
B
BK
GY
LA
RD
RN
V
W
(Brown)
(Black)
(Gray)
(Lt. Almond)
(Red)
(Orange)
(Ivory)
(White)
Compliances, specifications and availability are subject to change without notice.
ArrowLink­­­ option available. Add “M” suffix to standard catalog
number (example AH8300W, AH8300WM). For ordering information on ArrowLink & ArrowLink SPD connectors, see Page J-2
Build-to-spec customizable devices - Page J-4
Indicates NAFTA compliant - Page Q-30
Tamper resistant
J-12
EATON 2014 Arrow Hart Buyers Guide
www.eaton.com
www.arrowhart.com
J
Straight blade receptacles
Hospital grade straight blade receptacles
SECTION
Product description
2-pole, 3-wire grounding
15A, 125V/AC; 20A, 125V/AC
NEMA 5-15R, 5-20R
Tamper resistant hospital grade receptacles
1.30"
(33.0mm)
A
4.19"
(106.4mm)
3.28"
(83.3mm)
Rating
V/AC
NEMA
Description
Color suffix
15
125
5-15R
Duplex receptacle, back & side wire
GY, RD, V, W
Catalog no.
TR8200__
•
•
20
125
5-20R
Duplex receptacle, back & side wire
B, GY, RD, V, W
TR8300__
•
•
Hospital grade receptacles
A
TR8200
Rating
V/AC
NEMA
Description
Color suffix
15
125
5-15R
Duplex receptacle, back & side wire
B, GY, RD, V, W
Catalog no.
8200__
•
•
•
20
125
5-20R
Duplex receptacle, back & side wire
B, GY, LA, RD, V, W
8300__
•
•
•
Panel-mount special use hospital grade single receptacles
1.30"
(33.0mm)
A
4.19"
(106.4mm)
Rating
V/AC
NEMA
Description
Color suffix
Catalog no.
15
125
5-15R
Strap center to center spacing = 1.9375" (49.2mm),
back & side wire
V
8210M
•
20
125
5-20R
Strap center to center spacing = 1.9375" (49.2mm),
back & side wire
RD, V
8310M__
•
3.28"
(83.3mm)
Accessories for hospital grade NEMA 5-15 & 5-20 receptacles
Description
8200
Catalog no.
2-Gang, standard size duplex receptacle pre-marked stainless steel wallplate “emergency”
EM93102
•
1-Gang, standard-size duplex receptacle wallplate, CuVerro
93101CU
•
1-Gang, mid-size duplex receptacle wallplate, ivory / “GFCI protected”
PJ8GFV
2-Gang, standard size decorator wallplate, CuVerro®
93402CUR
2-Gang, mid-size duplex receptacle pre-marked wallplate, red / “emergency”
PJ82EMRD
®
1.30"
(33.0mm)
•
4.19"
(106.4mm)
3.28"
(83.3mm)
TR8200_M
Depth with
ArrowLink
1.31"
(33.2mm)
EM93102
93101CU
PJ8GFV
93402CUR
PJ82EMRD
0.62"
(15.7mm)
2.25"
(57.2mm)
1.94"
(49.3mm)
8310M
0.70"
(17.8mm)
Color ordering information:
For ordering devices, include Catalog no. followed by the Color suffix: B (Brown), GY (Gray), LA (Light Almond), RD (Red),
V (Ivory), W (White)
Specification Information:
HG receptacles: A-29
ArrowLink HG receptacles: A-29
Tamper resistant HG
receptacles: A-28
Panel mount HG receptacles: A-28
CuVerro® wallplates K-22
B
GY
LA
RD
V
W
(Brown)
(Gray)
(Lt. Almond)
(Red)
(Ivory)
(White)
Compliances, specifications and availability are subject to change without notice.
ArrowLink­­­option available. Add “M” suffix to standard catalog
number (example AH8300W, AH8300WM). For ordering information on ArrowLink & ArrowLink SPD connectors, see Page J-2
Build-to-spec customizable devices - Page J-4
Indicates NAFTA compliant - Page Q-30
Tamper resistant
www.eaton.com
www.arrowhart.com
EATON 2014 Arrow Hart Buyers Guide
J-13
J
Straight blade receptacles
Hospital grade straight blade receptacles
SECTION
Product description
2-pole, 3-wire grounding
15A, 250V/AC; 20A, 250V/AC
NEMA 6-15R, 6-20R
1.32"
(33.5mm)
Premium hospital grade receptacles
A
4.19"
(106.4mm)
3.28"
(83.3mm)
0.88"
(22.4mm)
AH8400
1.31"
(33.3mm)
Rating
V/AC
NEMA
Description
Color suffix
15
250
6-15R
Duplex receptacle, back & side wire
V, W
Catalog no.
AH8600__
Single receptacle, back & side wire
V, W
8610__
20
250
6-20R
Duplex receptacle, back & side wire
B, GY, RD, V, W
AH8400__
Single receptacle, back & side wire
B, RD, V, W
8410__
•
•
•
•
•
•
•
•
•
•
Accessories for hospital grade NEMA 6-15 & 6-20 receptacles
Description
Color suffix
1-Gang standard size duplex receptacle nylon wallplate
V
Catalog no.
5132V
•
1-Gang standard size single receptacle wallplate, CuVerro®
CU
93091CU
•
1-Gang mid-size duplex receptacle polycarbonate wallplate
LA
PJ8LA
1-Gang standard size duplex receptacle wallplate, CuVerro®
CUR
93101CUR
•
4.19"
(106.4mm)
3.28"
(83.3mm)
8410
0.83"
(21.1mm)
5132V
93091CU
PJ8LA
93101CUR
Color ordering information:
For ordering devices, include Catalog no. followed by the Color suffix: B (Brown), GY (Gray), RD (Red), V (Ivory), W (White)
Specification information:
Premium HG receptacles: A-26
ArrowLink premium HG
receptacles: A-30 & A-31
CuVerro® wallplates K-22
J-14
B
GY
LA
RD
V
W
(Brown)
(Gray)
(Lt. Almond)
(Red)
(Ivory)
(White)
CU
CUR
(White Bronze)
(Rose)
Compliances, specifications and availability are subject to change without notice.
ArrowLink­­­option available. Add “M” suffix to standard catalog
number (example AH8300W, AH8300WM). For ordering information on ArrowLink & ArrowLink SPD connectors, see Page J-2
EATON 2014 Arrow Hart Buyers Guide
Build-to-spec customizable devices - Page J-4
Indicates NAFTA compliant - Page Q-30
www.eaton.com
www.arrowhart.com
J
Electrical protection
Hospital grade protection devices
SECTION
Arrow Hart’s line of hospital grade GFCI, surge, and isolated ground
devices provide protection for both people and sensitive electronic
equipment
Surge protection plus
features & benefits
Shock sentry ground fault circuit interrupter
features & benefits
Audible alarm signals
when transient voltage
protection has expired
Ground termination with
back wire clamp provides
secure wiring and reduces
installation time
Green LED indicators to
verify transient voltage
protection and wiring
diagnostics
Line side terminals are
backed out and staked for fast
installation
Front access switch for
muting audible alarm until
device is replaced
Horizontal test/reset
button alignment provides
larger unobstructed area
Provides surge protection
for hot to neutral, hot to
ground and neutral to
ground
Large visual indicator light
gives quick notification
of a tripped or “end of
life” condition
Meets and exceeds 10ka short circuit testing and underwriters
laboratories (UL) 2006 UL943 safety standards
Isolated ground straight blade receptacles features & benefits
Exclusive 5-leaf brass line contacts
ensure smooth plug blade insertion
and long-term retention
Exclusive 0.030" (0.76mm) solid
brass non riveted, one piece
isolated grounding shunt
Screw catch feature on
duplex devices speeds
mounting of wallplates
Exclusive screw terminal guards
provide fast, easy insulation from
conductive surfaces
www.eaton.com
www.arrowhart.com
EATON 2014 Arrow Hart Buyers Guide
J-15
J
GFCI & surge protection receptacles
Hospital grade ground fault circuit interrupter receptacles
SECTION
Product description
2-pole, 3-wire grounding
15A, 125V/AC; 20A, 125V/AC
NEMA 5-15R, 5-20R
Premium hospital grade receptacles
1.30"
(33.0mm)
A
Rating
V/AC
15
125
NEMA
Description
Color suffix
5-15R
Hospital GFCI, back & side wire
B, GY, LA, RD, V, W
VGFH15__
•
•
Hospital GFCI, back & side wire
B, GY, LA, RD, V, W
VGFH15F__
•
•
Tamper resistant hospital GFCI,
back & side wire
B, LA, RD, V, W
TRVGFH15__
•
•
Tamper resistant hospital GFCI,
back & side wire
B, GY, LA, RD, V, W
TRVGFH15F__
•
•
Hospital GFCI, back & side wire
B, GY, LA, RD, V, W
VGFH20__
•
•
Hospital GFCI, back & side wire
B, GY, LA, RD, V, W
VGFH20F__
•
•
Tamper resistant hospital GFCI,
back & side wire
B, GY, RD, V, W
TRVGFH20__
•
•
Tamper resistant hospital GFCI,
back & side wire
B, GY, LA, RD, V, W
TRVGFH20F__
•
•
•
4.19"
(106.4mm)
3.28"
(83.3mm)
1.20"
(30.5mm)
VGFH15
20
125
5-20R
1.30"
(33.0mm)
Catalog no.
•
•
•
Includes standard size unbreakable wallplate
4.19"
(106.4mm)
Hospital grade surge protection receptacles
with LED indicators & audible alarm
3.28"
(83.3mm)
Depth with
ArrowLink
1.65"
(41.9mm)
VGFH20_MOD
1.30"
(33.0mm)
Product description
2-pole, 3-wire grounding
15A, 125V/AC
20A, 125V/AC
NEMA 5-15R, 5-20R
Surge protection receptacles w/audible alarm & LED indicators
A
4.19"
(106.4mm)
Rating
V/AC
15
125
NEMA
Description
Color suffix
5-15R
Hospital grade duplex receptacle,
back & side wire
BL, GY, RD, V, W
8200__S
•
•
IG hospital grade duplex receptacle,
back & side wire
BL, GY, RN, V, W
IG8200HG__S
•
•
Hospital grade duplex receptacle,
back & side wire
BL, GY, RD, V, W
8300__S
•
•
IG hospital grade duplex receptacle,
back & side wire
BL, GY, RN, V, W
IG8300HG__S
•
•
3.28"
(83.3mm)
1.64"
(41.7mm)
20
125
5-20R
TRVGFH15
Catalog no.
560 Joules, max. surge current - 18kA, MCOV - 150V/AC
3.28"
(83.3mm)
3.81"
(96.8mm)
2.69"
(68.3mm)
1.31"
(33.3mm)
1.13"
(28.7mm)
Color ordering information:
For ordering devices, include Catalog no. followed by the Color suffix: B (Brown), BL (Blue), GY (Gray), LA (Light Almond), RD (Red),
V (Ivory), W (White)
IG8200HG_S
Specification information:
Hospital grade GFCI: H-12
Surge protection receptacles with
audible alarm & LED: I-19
B
BL
GY
LA
RD
V
W
(Brown)
(Blue)
(Gray)
(Lt. Almond)
(Red)
(Ivory)
(White)
Compliances, specifications and availability are subject to change without notice.
ArrowLink­­­option available. Add “M” suffix to standard catalog
number (example AH8300W, AH8300WM). For ordering information on ArrowLink & ArrowLink SPD connectors, see Page J-2
Build-to-spec customizable devices - Page J-4
Indicates NAFTA compliant - Page Q-30
Tamper resistant
J-16
EATON 2014 Arrow Hart Buyers Guide
www.eaton.com
www.arrowhart.com
J
Isolated ground receptacles
Hospital grade isolated ground straight blade receptacles
SECTION
Product description
2-pole, 3-wire grounding
15A, 125V/AC; 20A, 125V/AC
NEMA 5-15R, 5-20R
Isolated ground duplex and single straight blade receptacles
1.32"
(33.5mm)
A
Rating
V/AC
15
125
NEMA
Description
Color suffix
5-15R
IG hospital grade duplex receptacle,
back & side wire
GY, RD, RN, V, W
IG8200__
•
•
IG hospital grade decorator duplex receptacle,
back & side wire
GY, RN, V, W
IG8262__
•
•
IG hospital grade single receptacle,
back & side wire
RN
IG8210*
IG hospital grade duplex receptacle,
back & side wire
GY, RD, RN, V, W
IG8300__
•
•
IG hospital grade decorator duplex receptacle,
back & side wire
GY, RN, V, W
IG8362__
•
•
IG hospital grade single receptacle,
back & side wire
RN
IG8310*
4.19"
(106.4mm)
3.28"
(83.3mm)
0.88"
(22.4mm)
IG8362
125
5-20R
•
•
•
•
*Not Fed Spec
2.38"
(60.3mm)
Hospital grade isolated ground straight blade receptacles
3.28"
(83.3mm)
0.83"
(21.1mm)
IG8210
20
Catalog no.
1.32"
(33.5mm)
Product description
2-pole, 3-wire grounding
20A, 250V/AC
NEMA 6-20R
Isolated ground duplex straight blade receptacles
A
3.28"
(83.3mm)
Rating
V/AC
20
250
NEMA
Description
Color
6-20R
IG hospital grade duplex receptacle,
back & side wire
RN
4.19"
(106.4mm)
Catalog no.
IG8400RN
•
Accessories for hospital grade protection devices
Description
IG8400
1.32"
(33.5mm)
0.88"
(22.4mm)
Catalog no.
1-Gang standard size duplex receptacle wallplate, CuVerro®
93101CUR
•
1-Gang standard size single receptacle wallplate, CuVerro®
93091CU
•
1-Gang orange duplex receptacle “isolated ground”, polycarbonate
PJ7IG
93101CUR
93091CU
PJ7IG
Color ordering information:
For ordering devices, include Catalog no. followed by the Color suffix: GY (Gray), RD (Red), RN (Orange), V (Ivory), W (White)
Specification information:
IG HG duplex & decorator
receptacle: I-21
IG HG single receptacle: I-21
www.eaton.com
www.arrowhart.com
GY
RD
RN
V
W
(Gray)
(Red)
(Orange)
(Ivory)
(White)
Compliances, specifications and availability are subject to change without notice.
ArrowLink­­­option available. Add “M” suffix to standard catalog
number (example AH8300W, AH8300WM). For ordering information on ArrowLink & ArrowLink SPD connectors, see Page J-2
Build-to-spec customizable devices - Page J-4
Indicates NAFTA compliant - Page Q-30
EATON 2014 Arrow Hart Buyers Guide
J-17
J
Safety grip & ultra grip plugs & connectors
SECTION
Safety grip hospital and industrial grade plugs & connectors features & benefits
Rating information clearly
marked on face of device
Rugged nylon body resists impact
and exposure to chemicals
Wiring chamber provides
generous space for wiring
Neoprene gasket seals around
cord for added terminal protection
from external elements
Textured surface allows for
easy grip and handling
Dual range cord grip provides
positive cord gripping while
limiting strain on conductors
Ultra grip straight blade plugs & connectors features & benefits
Amperage/voltage & catalog
number is clearly marked
Longer bosses on cord grip allow for excellent
clamp force on large diameter cords
Terminal body
assembly screws
backed out for
fast wiring and
assembly
Removable inserts
allow for optimal
cord retention over
a full range of cord
diameters
Tri-combo screws
Tri-combo screws
Double dovetail provides for superior
cord grip alignment and retention
Safety grip hospital grade
devices exceed federal spec.
and hospital grade testing for
use in demanding healthcare
environments
Clear terminal cover allows
for easy inspection of conductors
and terminations
Retained quick drive assembly
screws speed installation
Four position angled plug option
is ideal for applications requiring
power cord to lay close
to walls and floors
Tapered, individual wire
pockets guide stranded wire
into contact area for ease of
installation
Multiple-head drive screws
provide versatility for ease
of use
Compliances, specifications and availability are subject to change without notice.
J-18
EATON 2014 Arrow Hart Buyers Guide
www.eaton.com
www.arrowhart.com
J
Auto grip plugs & connectors
SECTION
Auto grip hospital and industrial grade plugs & connectors features & benefits
Front body
Smooth, tapered body
reduces snagging and
provides easy handling
Single piece
grounding contacts
for superior continuity
Neoprene gasket seals
around cord for added
terminal protection
from external elements
Back body
Rugged nylon body
resists impact and
exposure to chemicals
Auto grip clamp
design secures cord
during assembly,
reducing installation
time
Auto grip hospital grade
devices exceed federal spec.
and hospital grade testing for
use in demanding healthcare
environments
Unique clamp design secures
cord during assembly, reducing
installation time
Retained quick drive assembly
screws speed installation
Multiple-head drive screws
provide versatility for ease of use
Tapered, individual wire pockets
guide stranded wire into contact
area for ease of installation
Compliances, specifications and availability are subject to change without notice.
www.eaton.com
www.arrowhart.com
EATON 2014 Arrow Hart Buyers Guide
J-19
J
Straight blade plugs & connectors
Hospital grade straight blade plugs & connectors
SECTION
Product description
2-pole, 3-wire grounding
15A, 125V/AC
NEMA 5-15
Hospital grade plugs & connectors
1.37"
(34.8mm)
A
Rating
V/AC
15
1.44"
(36.6mm)
125
Safety grip straight body
0.33-0.66"
(8.3-16.7mm)
BK & W
AH8215HG
AH8219HG
•
Safety grip straight body
0.33-0.66"
(8.3-16.7mm)
C
AH8215HGC
AH8219HGC
•
Safety grip angled body
0.33-0.66"
(8.3-16.7mm)
BK & W
AH8215HGA
––
•
Safety grip angled body
0.33-0.66"
(8.3-16.7mm)
C
AH8215HGAC
––
•
Quick grip straight body
0.22-0.66"
(5.6-16.7mm)
W
AH8115W
AH8119W
Auto grip straight body
0.33-0.66"
(8.3-16.7mm)
BK & W
5266NHG
5269NHG
Auto grip isolated ground,
straight body
0.33-0.66"
(8.3-16.7mm)
RN
IG5266NHG
AH8215HG
1.46"
(37.1mm)
1.50"
(38.1mm)
1.28"
(32.5mm)
Connector
catalog no.
5-15
1.50"
(38.1mm)
Color
Plug
catalog no.
Description
2.06"
(52.3mm)
2.06"
(52.3mm)
Cord
diameter
NEMA
––
•
Hospital grade straight blade plugs & connectors
AH8215HGAC
Product description
1.46"
(37.1mm)
2-pole, 3-wire grounding
15A, 125V/AC
NEMA 5-15
2.59"
(65.8mm)
Hospital grade plugs & connectors
A
Rating
V/AC
20
125
Connector
catalog no.
5-20
Safety grip straight body
0.33-0.66"
(8.3-16.7mm)
BK & W
AH8315HG†
Safety grip angled body
0.33-0.66"
(8.3-16.7mm)
BK & W
AH8315HGA†
––
•
Safety grip angled body
0.33-0.66"
(8.3-16.7mm)
C
AH8315HGAC†
––
•
Auto grip straight body
0.33-0.66"
(8.3-16.7mm)
BK & W
5366NHG
AH8119W
1.38"
(34.9mm)
Color
Plug
catalog no.
Description
1.67"
(42.4mm)
†
Cord
diameter
NEMA
AH8319HG†
5369NHG
•
•
Not nom spec
1.83"
(46.5mm)
1.52"
(38.6mm)
5369NHG
Hospital grade dimensional
Information: B-14
Specification information:
Safety grip HG plugs &
connectors: B-21
Auto grip HG plugs &
connectors: B-21
Quick grip HG plugs &
connectors: B-21
Ultra grip HG plugs &
connectors: B-21
Color information:
BK (Black), C (Clear), RN (Orange), W (White)
BK
C
RN
W
(Black)
(Clear)
(Orange)
(White)
Compliances, specifications and availability are subject to change without notice.
Indicates NAFTA compliant - Page Q-30
J-20
EATON 2014 Arrow Hart Buyers Guide
www.eaton.com
www.arrowhart.com
J
Straight blade plugs & connectors
Hospital grade straight blade plugs & connectors
SECTION
Product description
2-pole, 3-wire grounding
15A, 250V/AC
NEMA 6-15
Hospital grade plugs & connectors
1.46"
(37.1mm)
A
2.06"
(52.3mm)
1.50"
(38.1mm)
Rating
V/AC
15
250
Cord
diameter
Connector
catalog no.
Description
6-15
Safety grip angled body
0.33-0.66"
(8.3-16.7mm)
BK & W
6665HG
––
•
Safety grip angled body
0.33-0.66"
(8.3-16.7mm)
C
6665HGC
––
•
1.28"
(32.5mm)
Color
Plug
catalog no.
NEMA
6665HGC
Hospital grade straight blade plugs & connectors
1.46"
(37.1mm)
2.06"
(52.3mm)
Product description
1.50"
(38.1mm)
2-pole, 3-wire grounding
20A, 250V/AC
NEMA 6-20
Hospital grade plugs & connectors
1.28"
(32.5mm)
6865HG
A
Rating
V/AC
20
250
Cord
diameter
Color
Plug
catalog no.
Connector
catalog no.
NEMA
Description
6-20
Safety grip angled body
0.33-0.66"
(8.3-16.7mm)
BK & W
6865HG
––
•
Safety grip angled body
0.33-0.66"
(8.3-16.7mm)
C
6865HGC
––
•
Color information:
BK (Black), C (Clear), W (White)
Hospital grade dimensional
Information: B-14
Specification information:
Safety grip HG plugs &
connectors: B-21
BK
C
W
(Black)
(Clear)
(White)
Compliances, specifications and availability are subject to change without notice.
Indicates NAFTA compliant - Page Q-30
www.eaton.com
www.arrowhart.com
EATON 2014 Arrow Hart Buyers Guide
J-21
J
Power lock devices
For applications where the need for a secure connection is absolute
SECTION
Power lock devices are designed for safety, energizing within a chamber
to eliminate the possibility of exterior arcing. They are ideal for high-abuse
industrial and specialized hospital applications
Nylon power lock plugs & connectors features & benefits
High-impact nylon shell
ideal for use in high
abuse installations
Unique twist type
cover eliminates
assembly screws
Neoprene gasket seals cord
entry hole and prevents dust
and moisture from entering
terminal area
Carefully machined
contacts of high alloy
brass molded into
high impact resistant
fiberglass reinforced
nylon
Tapered cord grip
cover prevents cord
snagging
Totally insulated
design eliminates
exposed metal parts
Innovative cord
clamping fingers
provide exceptional
cord retention
Armored power lock plugs & connectors features & benefits
Adjustable external metal
cord grip accepts a wide
range of cord diameters
Spring loaded safety
shutter ejects the
plug if not fully
locked in and
prevents entrance
of foreign matter
Large pressure plate
terminals for ease
of wiring
Neoprene grommet
protects against
contamination
Rugged steel shell
for maximum
protection
J-22
www.eaton.com
www.arrowhart.com
EATON 2014 Arrow Hart Buyers Guide
J
Power lock devices
Power lock hospital use locking devices
SECTION
Product description
2-pole, 3-wire grounding
20A, 125V/AC
Non-NEMA
Hospital use, back wire, plugs & connectors
1.62"
(41.1mm)
A
Rating
V/AC
20 125
3.87"
(96.0mm)
A
Rating
V/AC
20 125
2.37"
(60.2mm)
1.37"
(34.8mm)
Color
Plug
catalog no.
Connector
catalog no.
Nylon “dead front" design
0.33-0.66" (8.4-16.7mm)
GY
23056N
23054N
Armored “dead front" design
0.33-0.66" (8.4-16.7mm)
GY
23056
23054
Description
Color
Receptacle, not for use in hazardous areas
BK
Single
receptacle
23050
•
2.50"
(63.5mm)
3.28"
(83.3mm)
Power lock hospital use mobile x-ray devices
Product description
1.65"
(41.9mm)
2-pole, 3-wire grounding
50A, 250V/AC; 60A, 250V/AC
Non-NEMA
Hospital use, back wire, plugs & connectors
4.19"
(106.4mm)
Description
Cord
diameter
Color
50 250
“Dead front" design
0.75-1.25" (19.1-31.8mm)
GY
25525
60 250
“Dead front" design
0.75-1.25" (19.1-31.8mm)
GY
25625
A
2.87"
(72.9mm)
25525
10.00"
(254.0mm)
7.00"
(177.8
mm)
10.00"
(254.0
mm)
Rating
V/AC
Plug
catalog no.
Hospital use receptacles
A
25505
Cord
diameter
Hospital use receptacles
23054
23050
Description
7.50"
(190.5mm)
Rating
V/AC
Single
receptacle
Description
Color
50 250
Receptacle in plate assembly
Stainless steel
25505
60 250
Receptacle in plate assembly
Stainless steel
25605
Accessories for power lock hospital use locking devices
Description
Catalog no.
Steel 50A receptacle wallbox, KO sizes 1.25" (31.9mm), 1.50" (38.1mm), 2" (50.8mm)
25509
•
25509
Color information:
Dimensional information: C-81
Plug specification information:
Hospital power lock: C-93
Receptacle specification
information:
Hospital power lock: C-93
www.eaton.com
www.arrowhart.com
BK (Black), GY (Gray)
BK
GY
(Black)
(Gray)
(Stainless Steel)
Compliances, specifications and availability are subject to change without notice.
Indicates NAFTA compliant - Page Q-30
EATON 2014 Arrow Hart Buyers Guide
J-23
J
SECTION
LED accent lights
LED accent lighting
Product description
LNL1, LNL3, LNL4
LED accent lights features & benefits
• Fits into a standard junction box for easy installation
(single-gang, handy box, 2" minimum inside width)
LNL1 series
•
Delivers up to 30 lumens of illumination
•
Energy-efficient LED light source
•
Ship with 4 color lenses that are quickly and easily
field-installable
•
Illumination colors include white (4000k), amber,
red and blue
•
Lenses are 0.040" thick polycarbonate, and
are quickly and easily field-installable
•
Wet location listed (LNL3 series wet location
listed about 4' mounting height)
•
Die-cast aluminum face plates available in
white, black and brushed nickel
LED nightlights with vertical louvered faceplate
LNL3 series
Rating
V/AC
Description
Color suffix
120-277
LED accent light, vertical louvered plate
B, BN, W
LNL1__-UNV
120
LED accent light, scoop plate
B, BN, W
LNL3__-UNV
120-277
LED accent light, horizontal louvered plate
B, BN, W
LNL4__-UNV
Catalog no.
LED combination nightlights
Product description
LNL4 series
Single-pole
1W 120V/AC, back & side wire
Combination LED wallbox nightlight & switch
A
Rating
V/AC
15
120
Description
Color suffix
Single-pole switch with nightlight
A, BK, LA, V, W
Catalog no.
7738__
Full nightlight
A, BK, LA, V, W
7737__
7738
7737
Color ordering information:
For ordering devices, include Catalog no. followed by the Color suffix: A (Almond), B (Black), BN (Brushed Nickel), LA (Light Almond),
V (Ivory), W (White)
A
B/BK
(Almond)
(Black)
BN
LA
(Brushed Nickel) (Lt. Almond)
V
W
(Ivory)
(White)
Material characteristics: Faceplate, die-cast aluminum. Back body, ABS plastic. Strap, aluminum. Wire, 18 AWG, 600V, 105°V.
Temperature rating: 25°C (77°F) Specification information: J-23
Compliances, specifications and availability are subject to change without notice.
J-24
EATON 2014 Arrow Hart Buyers Guide
www.eaton.com
www.arrowhart.com
J
Pre-marked special use wallplates
Standard size pre-marked special use
SECTION
Product description
1-Gang, 2-Gang
Pre-marked special use, standard size
EG5134,
EM93071
EM5132,
EM93101
IG5132
IG5131
Description
Material
Color suffix
1-Gang toggle “emergency”
Nylon
RD
Catalog no.
EM5134
•
302/304 Stainless steel
—
EM93071*
•
1-Gang duplex receptacle “isolated ground”
Nylon
RN
IG5132
•
1-Gang duplex receptacle “emergency”
Nylon
RD
EM5132
•
302/304 Stainless steel
—
EM93101*
•
1-Gang single receptacle with 1.40" (35.7mm)
hole "isolated ground"
Nylon
RN, V
IG5131__
•
2-Gang duplex receptacle “emergency”
302/304 Stainless steel
—
EM93102*
* Only UL Listed and CSA certified
Mid-size pre-marked special use
Product description
1-Gang, 2-Gang
EM93102
PJ1EM
PJ7IG
PJ2EM
Pre-marked special use, mid-sized
PJ26IG
PJ8CO
Description
Material
Color suffix
1-Gang toggle “emergency”
Polycarbonate
RD
Catalog no.
PJ1EM
1-Gang decorator “emergency”
Polycarbonate
RD
PJ26EM
1-Gang orange decorator “isolated ground”
Polycarbonate
—
PJ26IG
1-Gang orange single receptacle, 1.40" (35.7mm)
hole “isolated ground”
Polycarbonate
—
PJ7IG
1-Gang duplex receptacle “computer”
Polycarbonate
V, W
PJ8CO__
1-Gang duplex receptacle “emergency”
Polycarbonate
RD
PJ8EM
1-Gang duplex receptacle “GFCI protected”
Polycarbonate
V, W
PJ8GF__
1-Gang orange duplex receptacle “isolated ground”
Polycarbonate
—
PJ8IG
2-Gang toggle “emergency”
Polycarbonate
RD
PJ2EM
2-Gang duplex receptacle “emergency”
Polycarbonate
RD
PJ82EM
PJ82EM
Color ordering information:
For ordering devices, include Catalog no. followed by the Color suffix: RD (Red), RN (Orange), V (Ivory), W (White)
RD
RN
V
W
(Red)
(Orange)
(Ivory)
(White)
(Stainless Steel)
Specification information: Wallplates K-22
Compliances, specifications and availability are subject to change without notice.
Indicates NAFTA compliant - Page Q-30
www.eaton.com
www.arrowhart.com
EATON 2014 Arrow Hart Buyers Guide
J-25