Vibra Trol™
Use: Designed for the protection of sensitive
electronic, electrical, and mechanical equipment
from high frequency vibration and impact shock.
Features: Cup mounts accommodate multidirectional loading, can support loads radially and
axially in both compression and tension. Effectively
isolate frequencies above 45 Hz. Metal housing is zinc
plated and furnished with either 1/4"-20 or 3/8"-16
tapped hole. The elastomer element is a high grade
neoprene with excellent oil and ozone resistance.
Temperature Range: -20°F (-28.9°C) to 180°F (82.2°C).
3"
23/8"
(76.2)
(60.3)
21/2"
115/16"
(63.5)
(49.2)
23/8"
3"
(60.3)
(76.2)
21/2"
(63.5)
115/16"
(49.2)
1/4"-20
Tap
.196" (5.0) Dia.
3/8"-16
CM1 Series
Tap
.266" (6.7) Dia.
CM2 Series
Ideal for wall or ceiling mounts.
Arrows indicate
vibration direction.
CM Type - Metal Housing and Neoprene Cup Mount
CM1-14BNT
CM1-24BNT
Load Range
Lbs.
8 to 14
14 to 24
(kN)
Tap
Size
Wt. Each
(.03-.06)
1/4"-20
.60
(.27)
(.06-.10)
1/4"-20
.60
(.27)
.60
(.27)
Lbs.
(kg)
CM1-38BNT
24 to 38
(.10-.17)
1/4"-20
CM1-60BNT
38 to 60
(.17-.26)
1/4"-20
.60
(.27)
CM2-30BNT
15 to 30
(.07-.13)
3/8"-16
.70
(.32)
CM2-50BNT
30 to 50
(.13-.22)
3/8"-16
.70
(.32)
(.22-.35)
3/8"-16
.70
(.32)
(.35-.49)
3/8"-16
.70
(.32)
CM2-80BNT
CM2-110BNT
50 to 80
80 to 110
Approximate Height
CM1 Series 11/8" (28.6mm)
CM2 Series 11/2" (38.1mm)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
254
Vibra Trol
Part
Number