Series TS3R2G Output to 2.5A, 30Vdc DC Control Part Number Description TS3R2G 2.5A, 30 Vdc Part Number Explanation TS Series 3 R 2 G Control Range3 Switch Type2 Line Voltage Output Current – Amps 1 NOTES 1) Line Voltage (nominal) = 3=30 Vdc 2) Switch Type: R = Random turn-on 3) Control Range: G = 12-30 Vdc MECHANICAL SPECIFICATION .5 (12.7) 1.14 (29) .62 (15.7) .2 (5.1) WEIGHT: .39 oz. (11g) Hole Ø .04 (1.1) Input Current (mA) CONTROL CHARACTERISTIC 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FEATURES/BENEFITS • Pin-to-pin compatible with electromechanical relays • DC control • DC output • Random turn-on • Compact size • High inrush capabilities • Integrated clamping voltage DESCRIPTION The Series TS relays provide DC switching in a compact size. The TS relays also provide a DC control. These relays can withstand high surge currents. The TS relays are pin-to-pin compatible with electromechanical relays and may be used as replacements. APPLICATIONS • Interface applications • Vending machines • Contactor driver • Fan speed control APPROVALS All models are UL recognized. UL File Number E128555. INPUT (CONTROL) SPECIFICATION 0 5 10 15 20 25 Control Voltage (V) Figure 2 30 35 Min Max Units Control Range 12 30 Vdc Input Current Range 4.1 13 mA (See Figure 2) Must Turn-Off Voltage Input Resistance (Typical) © 2014 TELEDYNE RELAYS (800) 284-7007 • www.teledynerelays.com 2.5 V 2100 Ohms TS3R2G Page 1 TS3R2G\072014\Q3 Series TS3R2G 4A to 250 Vac SIP Package DC Control BLOCK DIAGRAM + grid 0.1" bottom view A1 A2 A1 (*) Load NO C A2 (*) On inductive load – OUTPUT (LOAD) SPECIFICATION Operating Range Min Max Units 0 30 Vdc 60 V 2.5 Arms Peak Voltage Load Current Range .001 NON-REPETITIVE SURGE CURRENT 12 10 8 (See Figure 5) 12 A On-State Voltage Drop 0.5 V Off-State Leakage Current (60 Hz) 1 mA Turn-On Time (60Hz) 50 μs Turn-Off Time (60Hz) 600 μs Switching Frequency 100 Hz Apeak Maximum Surge Current Rating (Non-Repetitive) 6 4 2 0 1 10 100 1000 t(s) ENVIRONMENTAL SPECIFICATION Min Units 125 ºC Operating Temperature 100 ºC Input-Ouput Isolation -40 2500 THERMAL CURVES V 4 12 °C/W Junction-Ambient Thermal Resistance 44 °C/W 3 Maximum Soldering Heat (1mm case) 260 °C 2.5 Load Current Junction-Case Thermal Resistance 3.5 Tc (°C) @ Tj=125°C Max Maximum Junction Temperature TJ=125°C Tc=90°C 2 1.5 90 95 100 105 110 115 120 1 0.5 0 NOTES 1. On inductive loads, a free-wheeling diode (or clamp) is recommended 2. Electrical specifications at 25°C unless otherwise specified. 3. TS32G no polarity on the control pins 4. For additional/custom options, contact factory TS3R2G Page 2 0 10 20 30 40 50 60 70 80 90 100 110 Ambient Temperature (°C) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2014 TELEDYNE RELAYS TS3R2G\072014\Q3