3 0 Front Cover TECH SUPPORT

advertisement
303
COLLINS CLASSROOM CENTER
TECH SUPPORT
Help Desk: x4357
For priority support, please use the
classroom phone.
NOTES
At the end of class:
Turn off the projector.
Log off the teaching station.
Turn off the room lights.
PLEASE LEAVE THIS MANUAL ON THE
COUNTERTOP OF THE INSTRUCTOR’S STATION
Collins Classroom Center
THIS ROOM IS EQUIPPED WITH:
COMPUTER
VIDEO
AUDIO
PC
Video Projector
Wall Speakers
Laptop Connection
Document Camera
Wireless Presenter
Blu-Ray Player
Built-In Stereo
Audio Amplifier
AV SWITCH
Extron MediaLink System
Extron MediaLink
Controller
Blu-Ray Player
1
303
303
EQUIPMENT
OVERVIEW
Panasonic PT-LZ370
Projector
This room is equi pped with an Extron MediaLink system that
allows users to quickly and easily switch between different
sources. The inputs on the switch are clearly indicated and will
correspond to the device you wish to use.
To operate the projector:
1.)
Press the Display ON button on the Extron switch. (The
ON button will blink for 30 seconds while the system
warms up.)
2.)
Select the appropriate video device using the INPUT
buttons on the Extron switch.
3.)
Adjust the VOLUME knob on the Extron switch to reach
the desired level.
On/Off
Input Buttons
2
PROJECTOR
Volume Knob
Built-In
Stereo Audio Amplifier
To adjust audio settings:
Like video settings, the audio for all devices may be adjusted with the
volume controls on the Extron controller.
To adjust audio settings:
Adjust the VOLUME knob on the Extron controller to reach
the desired level.
Volume Knob
3
AUDIO SYSTEM
1.)
Samsung SDP-860
Document Camera
1.)
Make sure the document camera and the projector are
turned ON.
2.
Select the corresponding input button listed
on the PROJECTOR page.
3.)
If you’d like to display the document camera image in a PC
window, follow the SDP Viewer Software Quick Guide on the
next page.
4
DOCUMENT CAMERA
To use the document camera:
Sony
Blu-Ray Player
1.)
Make sure the combo unit, projector, and receiver are turned ON.
2.)
Use the BLU-RAY button on the MediaLink controller to select
the VCR as the video source.
5
DVD/VCR
To use the Blu-Ray Player:
HP
Computer
To use the computer:
1.)
LOGON to the computer using your UWSP username and password.
2.)
To display the computer’s screen on the projector, turn the
projector on using the ON button on the Extron controller. Then press
the corresponding input button on the projector remote to choose the
PC as the video source (see the “PROJECTOR” page).
Unlocking a computer:
If the PC’s screen indicates that it has been locked by another user, you can
unlock the system by restarting it. To restart a locked computer:
1.)
Press and hold the POWER button on the computer until it shuts
down (typically, you will need to hold the button for 5 to 10 seconds
before the sequence will begin).
2.)
Press the power button again to restart the PC. When the login screen
appears, enter your UWSP username and password.
NOTE TO USERS:
6
COMPUTER
Please remember to logoff the computer when finished. After 60 minutes of
inactivity, classroom computers will automatically lock, preventing subsequent
users from logging on. If a computer has accidentally been left locked by another
user, please see the section on “Unlocking a Computer” above.
HDMI & DisplayPort
Guest Device Connection
To connect a mobile device:
1.)
HDMI - Disconnect the DisplayPort adapter from the HDMI cable (if
connected) and connect your mobile device to the provided HDMI
cable.
DisplayPort - Connect your mobile device to the provided DisplayPort
adapter and then connect the DisplayPort adapter to the provided
HDMI cable.
● If your device does not have a DisplayPort or HDMI connection, contact Tech Support for further
assistance.
● Some devices have proprietary, mini, or micro connections and will require an additional adapter to connect to
the room’s AV system.
● Also, some devices require proper configuration to utilize an external display. To configure your device
accordingly, please refer to the instructions provided by your manufacturer.
2.)
Use the HDMI button on the Extron controller to select the guest
device as the video source.
● When the correct projector input is selected while the guest device is connected, the AV system will
automaticly switch from the comptuer to the guest device.
HDMI Cable
DisplayPort Adapter
7
GUEST DEVICES
Wireless internet connections are also available in most classrooms. For
instructions on configuring your device, contact Help Desk at x4375 or visit
www.uwsp.edu/IT/Network/Wireless.
COLLINS
CLASSROOM
CENTER
303
TECHNOLOGY PROBLEMS
For issues related to technical services, please consult the
technical support information found on the front cover.
At the end of class:
At the end of class:
SEE FRONT
MAINTENANCE EMERGENCIES
x4219
During the hours of 7 AM - 3:30 PM, issues related to building
maintenance may be directed to Facility Services. During off-hours,
maintenance emergencies may be reported to Protective Services.
FACILITY SERVICES
SECURITY CONCERNS
x3456
For issues related to building or campus security, please contact
Campus Protective Services.
CAMPUS PROTECTIVE
SERVICES
POLICE/FIRE EMERGENCIES
9-911
SPPD/SPFD
NOTE: There will be 7-12 seconds of silence before the phone rings. Please do not hang up.
EXIT
EXIT
303
EXIT
THIRD FLOOR
EXIT
Download