PLEASE LEAVE THIS MANUAL ON THE
COUNTERTOP OF THE INSTRUCTOR’S STATION

Collins Classroom Center 231
THIS ROOM IS EQUIPPED WITH:
COMPUTER
PC
Guest Device
Connection
Wireless Presenter
VIDEO
Video Projector
Document Camera
AUDIO
Wall Speakers
Projector Controlled
Audio System
1

To use the projector:
1. Make sure both the projector and the needed video device (Computer, VCR, DVD, etc.) are turned ON .
2. Use the corresponding input button on the projector’s remote to activate the video input line for the video device.
Devices are generally selected by pressing the corresponding input button.
Below is the input configuration for this room. In a few classrooms, additional steps are needed to get some of the video devices to display on the projector. A detailed explanation of how to operate each device is given in the following sections of this manual.
Input Buttons
INPUT CONFIGURATION:
HDMI 1 (6) - PC & Guest Device
HDMI 2 (6) - Document Cam
S-Video (4) - VCR
Projector Remote
2

All audio in the Projector Controlled Audio System is adjusted directly through the volume button on the projector’s remote.
Additionally, the remote‘s AV Mute button can be used to silence the audio and simultaneously black the screen.
AV Mute Button
Projector Remote
Volume Button
3

To use the document camera:
1.) Make sure the document camera and the projector are
2.) Use the corresponding input button on the projector’s remote to select the document camera as the video
source.
4

While this room is not equi pped with a dedicated DVD player, DVDs can be played through the PC’s DVD drive.
To play a DVD:
1.) Make sure the PC, projector, and receiver are turned ON .
2.) Use the corresponding input button on the projector remote to select the PC as the video source.
4.) If video playback software does not automatically open, launch Windows Media Player from the application menu.
5.) To play media in fullscreen mode, press ALT + ENTER or click on the fullscreen toggle in the bottom right corner of the window. To exit fullscreen mode, press ESC .
Fullscreen Toggle
5

To use the computer:
1.) LOGON to the computer using your UWSP username and password.
2.) To display the computer’s screen on the projector, turn the projector on using the POWER button on the remote. Then press the corresponding input button on the projector remote to choose the as the video source (see the “PROJECTOR” page).
PC
Unlocking a computer:
If the PC’s screen indicates that it has been locked by another user, you can unlock the system by restarting it. To restart a locked computer:
1.) Press and hold the POWER button on the computer until it shuts down (typically, you will need to hold the button for 5 to 10 seconds before the sequence will begin).
2.) Press the power button again to restart the PC. When the login screen appears, enter your UWSP username and password.
NOTE TO USERS:
Please remember to logoff the computer when finished.
After 60 minutes of inactivity, classroom computers will automatically lock, preventing subsequent users from logging on. If a computer has accidentally been left locked by another user, please see the section on “ Unlocking a Computer” above.
6

To connect a mobile device:
1.) HDMI - Disconnect the DisplayPort adapter from the HDMI cable (if connected) and connect your mobile device to the provided HDMI
cable.
adapter and then connect the DisplayPort adapter to the provided
HDMI cable.
● If your device does not have a DisplayPort or HDMI connection, contact Tech Support for further
assistance.
● Some devices have proprietary, mini, or micro connections and will require an additional adapter to connect to
the room’s AV system.
● Also, some devices require proper configuration to utilize an external display. To configure your device
accordingly, please refer to the instructions provided by your manufacturer.
2.) Use the corresponding input buttons on the projector remote to select the guest device as the video source.
● When the correct projector input is selected while the guest device is connected, the AV system will
automaticly switch from the comptuer to the guest device.
Wireless internet connections are also available in most classrooms. For instructions on configuring your device, contact Help Desk at x4375 or visit www.uwsp.edu/IT/Network/Wireless .
HDMI Cable
DisplayPort Adapter
7

COLLINS
CLASSROOM
CENTER
231
TECHNOLOGY PROBLEMS
For issues related to technical services, please consult the technical support information found on the front cover.
At the end of class:
At the end of class:
SEE FRONT
MAINTENANCE EMERGENCIES
During the hours of 7 AM - 3:30 PM, issues related to building maintenance may be directed to Facility Services. During off-hours, maintenance emergencies may be reported to Protective Services.
x 4219
FACILITY SERVICES
SECURITY CONCERNS
For issues related to building or campus security, please contact
Campus Protective Services.
x 3456
CAMPUS PROTECTIVE
SERVICES
POLICE/FIRE EMERGENCIES
9-911
SPPD/SPFD
NOTE: There will be 7-12 seconds of silence before the phone rings. Please do not hang up.
EXIT EXIT
EXIT
231
SECOND FLOOR
EXIT