PSI engineering
Reduce the number of Packing Stations
by Automating your Documents
Automated Packing Slip
with Top or Side Applicator
Laser Prints Personalized Documents on
Demand
Automatically apply Packing Slip to Top
or Side of your Package
Supports Multiple Page Packing Slips and
each order can vary in the number of
pages
Uses Standard Letter Sized Photocopy
Paper with a low operating cost Laser
Printer
Optional Literature Feeder: Inserts
Additional Card, Pre-Folded Document
or CD
A
AN INDUSTRY FIRST
P
†
The Bottom Line
ROI typically in less than one year
Increases the Capacity of your
Distribution Center
Reduces the number of Packing
Stations needed
A Real Laser Printed Packing Slip
meets Customer Requirements
Packing Slip becomes the
shipping label. No separate Label
Printer/Applicator needed
Reduces Bottlenecks
Reduces Labor Costs
AutoSlip shown
with Side Applicator
† U.S. Pat. No. 6,791,706 B1
engineering the future
In One Step the Packing Slip is
- Printed
- Folded
- Inserted into an adhesive pouch
- Applied to the outside of a Carton
AutoSlip shown
with Top Applicator
PSI engineering
Technical Specifications
System
Accumulator Sorter
Intel Microprocessor Controlled
Dimensions: L 124 “ x W 43”
(314.9 cm x 109.2 cm(Autoslip only]
Speed: up to One packing slip pouch
every 1.5 seconds in batch mode
Speed with applicator up to 20 cpm
In-line Barcode Reader for Order Control
Power Requirments: 110 V, 15 A
- Power requirements for printer not included
Air Requirements: 80 psi
Duty Cycle: up to 180, 000 packing
slips/month
Printer Type: Laser
Printer Speed: 50 to 92 ppm
Dimensions: from 24” x 27” (61 cm x 68.5 cm)
Other Printer Features & Options: Printer
Dependent
Optional Features
Applicator:
- Side apply applicator or
- Top apply applicator
Barcode controls Hardware & Software for
Document Verification
Two & Three Point Barcode Verification
Optional Literature Feeder
Insert additional Card, Pre-Folded
Document or CD into Packing Slip
Standard Pack Slip Pouch Size: 4.5” x 7.6”
(11.43 cm x 19.30 cm) [Other sizes
available]
Number of Documents/pouch (20lb paper):
-1 to 4 sheets with standard size pouch
-1 to 6 sheets with larger size pouch
Optional: 1 to 10 sheets
Materials Supported: Paper, 20 to 24 lb
(9.07 x 10.89 kg) Bond Paper
Paper Size:
-Standard 8.5” x 11” (21.59 cm x 27.94 cm) or A4
Other sizes of paper available through
custom developments
Note: These specifications are based on our Standard Turn-Key System
Custom Products can be developed with other requirements
LC IN-FEEDER
PRINT FEEDER DF
Copyright 2006. PSI reserves the right to make product modifications without notice
PSI Engineering
3535 Laird Rd, Mississauga ON Canada L5L 5Z4
Sales: 800.774.5758
Tel: 905.858.3600 | Fax: 905.858.3615
Email:info@psiengineering.com
www.psiengineering.com
Authorized PSI Agent
engineering the future
PLC Interface, RS232 Interface, and External
TTL
PDFS
Printer
Packing Slip Pouch
Optional Interface Connections
Other PSI Solutions
Allows multiple printed orders to be held in
the systems