Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com Report Title: Qualification Test Report Report Type: See Attached Date: See Attached Part Type: Plastic Encapsulated Package Family QFN HMC215LP4E HMC232LP4E HMC241LP4E HMC263LP4E HMC271ALP4E HMC276LP4E HMC305ALP4E HMC311LP3E HMC321LP4E HMC322LP4E HMC334LP4E HMC340LP5E HMC344LP3E HMC345LP3E HMC346LP3E HMC347LP3E HMC348LP3E HMC349LP4CE HMC356LP3E HMC368LP4E HMC369LP3E HMC370LP4E HMC372LP3E HMC373LP3E HMC375LP3E HMC376LP3E HMC381LP6E HMC382LP3E HMC384LP4E HMC385LP4E HMC386LP4E HMC388LP4E HMC389LP4E HMC390LP4E HMC391LP4E HMC394LP4E HMC408LP3E HMC409LP4E Mixer, High IP3, Double-Balanced Switch, SPDT, High Isolation Switch, SP4T Amplifier, Low Noise Attenuator, 5-Bit Digital Switch, Matrix Attenuator, 5-Bit Digital Amplifier, HBT Gain Block Switch, SP8T Switch, SP8T Mixer, Downconverter I/Q Mixer / IRM Switch, SP4T Switch, SP4T Attenuator, Analog VVA Switch, SPDT Hi Isolation Switch, SPDT CATV Switch, Hi Isolation Amplifier, Low Noise Multiplier, Active x2 Multiplier, Active x2 Multiplier, Active x4 Amplifier, Low Noise Amplifier, Low Noise Amplifier, Low Noise Amplifier, Low Noise High IP3, Dual Downconverter Amplifier, Low Noise VCO w/ Buffer VCO w/ Buffer VCO w/ Buffer VCO w/ Buffer VCO w/ Buffer VCO w/ Buffer VCO w/ Buffer Frequency Divider, 5-Bit Counter Amplifier, Power 1W Amplifier, Power 1W Hittite Microwave Corporation is committed to: QTR: 05006 Rev: 02 HMC415LP3E HMC416LPE4 HMC424LP3E HMC425LP3E HMC427LP3E HMC429LP4E HMC430LP4E HMC431LP4E HMC441LP3E HMC443LP4E HMC444LP4E HMC445LP4E HMC451LP3E HMC455LP3E HMC461LP3E HMC462LP5E HMC463LP5E HMC464LP5E HMC465LP5E HMC466LP4E HMC467LP3E HMC468LP3E HMC470LP3E HMC472LP3E HMC486LP5E HMC487LP5E HMC489LP5E HMC490LP5E HMC491LP3E HMC492LP3E HMC493LP3E HMC494LP3E HMC495LP3E HMC496LP3E HMC497LP4E HMC500LP3E HMC504LP4E HMC505LP4E Amplifier, Medium Power VCO w/ Buffer Attenuator, 6-Bit Digital Attenuator, 6-Bit Digital Switch, Transfer VCO w/ Buffer VCO w/ Buffer VCO w/ Buffer Amplifier, Medium Power Frequency Multiplier, Active x2 Frequency Multiplier, Active x8 Frequency Multiplier, Active x16 Amplifier, Medium Power Amplifier, High IP3 ½W Amplifier, Power 1W Amplifier, Wideband Self-Biased Amplifier, Wideband Self-Biased Amplifier, Wideband Amplifier, Wideband VCO w/ Buffer Attenuator, 2-Bit Digital Attenuator, 3-Bit Digital Attenuator, 5-Bit Digital Attenuator, 6-Bit Digital Amplifier, Power 2W Amplifier, Power 2W Amplifier, Power 1W Amplifier, Medium Power Amplifier, Low Noise Frequency Divider, ÷2 Frequency Divider, ÷4 Frequency Divider, ÷8 Modulators, Direct Quadrature Modulators, Direct Quadrature Modulators, Direct Quadrature Modulator, Vector VCO w/ Buffer VCO w/ Buffer Hittite’s employees recognize the responsibility to: • Supplying products of the highest quality • Advance in state-of-the-art technology that supports our products • Enhance our competitive position with superior product standards • Take the initiate to ensure product quality • Create an environment where the highest standards are maintained • Continue to improve quality practices 20 Alpha Road, Chelmsford, MA 01824 978-250-3343 tel • 978-250-3373 fax • www.hittite.com • sales@hittite.com Part Type: Plastic Encapsulated Package Family QFN HMC506LP4E HMC507LP5E HMC508LP5E HMC509LP5E HMC510LP5E HMC511LP5E HMC512LP5E HMC513LP5E HMC514LP5E HMC515LP5E HMC529LP5E HMC530LP5E HMC531LP5E HMC532LP4E HMC533LP4E HMC534LP5E HMC535LP4E HMC536LP2E HMC538LP4E HMC539LP3E HMC540LP3E HMC541LP3E HMC542ALP4E HMC546LP2E HMC547LP3E HMC548LP3E HMC551LP4E HMC552LP4E HMC561LP3E HMC566LP4E HMC575LP4E HMC581LP6E HMC582LP5E HMC583LP5E HMC584LP5E HMC590LP5E HMC591LP5E HMC593LP3E VCO with Fo/2 VCO with Fo/2 VCO with Fo/2 VCO with Fo/2 VCO with Fo/2 and ÷4 VCO with Fo/2 VCO with Fo/2 and ÷4 VCO with Fo/2 and ÷4 VCO with Fo/2 and ÷4 VCO with Fo/2 and ÷4 VCO with Fo/2 and ÷4 VCO with Fo/2 and ÷4 VCO with Fo/2 and ÷4 VCO w/ Buffer VCO with ÷16 VCO with Fo/2 and ÷4 Phase Locked Oscillator Switch, SPDT T/R Phase Shifter, Analog Attenuator, 5-Bit Digital Attenuator, 4-Bit Digital Attenuator, 1-Bit Digital Attenuator, 6-Bit Digital Switch, SPDT, 10W Failsafe Switch, SDT High Isolation Amplifier, Low Noise Mixer, High IP3, Double-Balanced Mixer, High IP3, Double-Balanced Frequency Multiplier, Active x2 Amplifier, Low Noise Frequency Multiplier, Active x2 High IP3, Dual Downconverter VCO with Fo/2 and ÷4 VCO with Fo/2 and ÷4 VCO with Fo/2 and ÷4 Amplifier, Power 1W Amplifier, Power 2W Amplifier, Low Noise w/ Bypass Hittite Microwave Corporation is committed to: QTR: 05006 Rev: 02 HMC596LP4E HMC597LP4E HMC600LP4E HMC601LP4E HMC602LP4E HMC604LP3E HMC605LP3E HMC611LP4E HMC615LP4E HMC616LP3E HMC617LP3E HMC618LP3E HMC619LP5E HMC621LP4E HMC623LP4E HMC624LP4E HMC625LP5E HMC625HFLP5E HMC626LP5E HMC627LP5E HMC630LP3E HMC631LP3E HMC632LP5E HMC637LP5E HMC641LP4E HMC646LP2E HMC647LP6E HMC648LP6E HMC649LP6E HMC652LP2E HMC653LP2E HMC654LP2E HMC655LP2E HMC656LP2E HMC657LP2E HMC658LP2E HMC662LP3E HMC665LP4E Switch, 4x2 Matrix I/Q Demodulator Logarithmic Detector/Controller Logarithmic Detector/Controller Logarithmic Detector/Controller Amplifier, Low Noise Amplifier, Low Noise Logarithmic Detector/Controller Mixer, Sub-Harmonic Amplifier, Low Noise Amplifier, Low Noise Amplifier, Low Noise Amplifier, Wideband (Distributed) Mixers, Downconverter RFICs Mixers, Downconverter RFICs Attenuator, 6-Bit Digital VGA, 6-Bit Digital VGA, 6-Bit Digital VGA, 6-Bit Digital VGA, 6-Bit Digital Modulator, Vector Modulator, Vector VCO with Fo/2 and ÷4 Amplifier, Wideband (Distributed) Switch, SP4T Switch, SPDT 40W Failsafe Phase Shifter, 6-Bit Digital Phase Shifter, 6-Bit Digital Phase Shifter, 6-Bit Digital Attenuator, Passive Attenuator, Passive Attenuator, Passive Attenuator, Passive Attenuator, Passive Attenuator, Passive Attenuator, Passive Power Detector, Log Amplifier Mixers, Double Balanced Hittite’s employees recognize the responsibility to: • Supplying products of the highest quality • Advance in state-of-the-art technology that supports our products • Enhance our competitive position with superior product standards • Take the initiate to ensure product quality • Create an environment where the highest standards are maintained • Continue to improve quality practices 20 Alpha Road, Chelmsford, MA 01824 978-250-3343 tel • 978-250-3373 fax • www.hittite.com • sales@hittite.com Part Type: Plastic Encapsulated Package Family QFN HMC666LP4E HMC668LP3E HMC669LP3E HMC674LP3E HMC675LP3E HMC676LP3E HMC677LP5E HMC680LP4E HMC681LP5E HMC682LP6CE HMC683LP6CE HMC684LP4E HMC685LP4E HMC686LP4E HMC687LP4E HMC688LP4E HMC689LP4E HMC694LP4E HMC695LP4E HMC697LP4E HMC698LP5E HMC699LP5E HMC700LP4E HMC701LP6CE HMC702LP6CE HMC703LP4E HMC704LP4E HMC705LP4E HMC707LP5E HMC708LP5E HMC712LP3CE HMC713MS8E HMC713LP3E HMC715LP3E HMC716LP3E HMC717LP3E HMC718LP4E HMC719LP4E Mixers, High IP3 Amplifiers, Low Noise Amplifiers, Low Noise Latched Comparator-RSPECL Latched Comparator-RSCML Latched Comparator-RSECL High Speed Logic, Digital Variable Gain Amplifier, Digital Variable Gain Amplifier, Digital Mixers, Downconverter RFIC Mixers, Downconverter RFIC Mixer, Downconverter Mixer, Downconverter Mixers, High IP3 Mixers, High IP3 Mixers, High IP3 Mixers, High IP3 Variable Gain Amplifier, Analog Freq. Multiplier, Active x4 Modulator, Direct Quadrature PLL, Integer N PLL, Integer N PLL, Fractional-N Synthesizer IC PLL, Fractional-N Synthesizer IC PLL, Fractional-N Synthesizer IC PLL, Fractional-N w/ Sweeper PLL, Fractional-N Freq. Divider, Programmable Variable Gain Amplifier, Digital Variable Gain Amplifier, Digital Attenuator, Analog VVA Power Detector, Log Amplifier Power Detector, Log Detector Amplifier, Low Noise Amplifier, Low Noise Amplifier, Low Noise Amplifier, Low Noise Amplifier, Low Noise Hittite Microwave Corporation is committed to: QTR: 05006 Rev: 02 HMC734LP5E HMC720LP3E HMC721LP3E HMC722LP3E HMC723LP3E HMC735LP5E HMC736LP4E HMC737LP4E HMC738LP4E HMC739LP4E HMC742LP5E HMC742HFLP5E HMC743LP6CE HMC750LP4E HMC753LP4E HMC755LP4E HMC757LP4E HMC758LP3E HMC759LP3E HMC764LP6CE HMC765LP6CE HMC770LP4BE HMC783LP6CE HMC785LP4E HMC786LP4E HMC788LP2E HMC792LP4E HMC794LP3E HMC795LP5E HMC797LP5E HMC799LP3E HMC800LP3E HMC801LP3E HMC802LP3E VCO with Fo/2 & Divide-by-4 1:2 Fanout Buffer XOR / XNOR AND / NAND / OR / NOR D-Type Flip Flop VCO with Fo/2 & Divide-by-4 VCO with Fo/2 VCO with Fo/2 VCO with Fo/2 & Divide-by-16 VCO with Fo/2 & Divide-by-16 VGA, 6-Bit Digital VGA, 6-Bit Digital VGA, 6-Bit Digital Amplifier, Limiting Amplifier Amplifier, Low Noise Amplifier, Linear & Power Amplifier, Linear & Power Amplifier, Low Noise Attenuators, Digital PLL w/Integrated VCO, Microwave VCOs PLL w/Integrated VCO, Microwave VCOs 50 / 75 Ohm Differential Amplifier PLL w/Integrated VCO, Microwave VCOs Mixers, High IP3 Mixers, High IP3 Amplifier, Gain Blocks & Drivers Attenuator, Digital Freq. Dividers & Detectors, Programmable Divider Direct Modulator with VGA Amplifier, Wideband Distributed Transimpedance Amplifier Attenuator, Digital Attenuator, Digital Attenuator, Digital Hittite’s employees recognize the responsibility to: • Supplying products of the highest quality • Advance in state-of-the-art technology that supports our products • Enhance our competitive position with superior product standards • Take the initiate to ensure product quality • Create an environment where the highest standards are maintained • Continue to improve quality practices 20 Alpha Road, Chelmsford, MA 01824 978-250-3343 tel • 978-250-3373 fax • www.hittite.com • sales@hittite.com Part Type: Plastic Encapsulated Package Family QFN HMC807LP6CE HMC816LP4E HMC817LP4E HMC818LP4E HMC820LP6CE HMC821LP6CE HMC822LP6CE HMC824LP6CE HMC826LP6CE HMC828LP6CE HMC830LP6GE HMC831LP6CE HMC836LP6CE HMC837LP6CE HMC838LP6CE HMC839LP6CE HMC840LP6CE HMC849LP4CE HMC860LP3E HMC862LP3E HMC863LP4E HMC881LP5E HMC882LP5E HMC890LP5E HMC891LP5E PLL w/Integrated VCO, Microwave VCOs Amplifier, Low Noise Amplifier, Low Noise Amplifier, Low Noise PLL with Integrated VCO, RF VCOs PLL with Integrated VCO, RF VCOs PLL with Integrated VCO, RF VCOs PLL with Integrated VCO, RF VCOs PLL with Integrated VCO, RF VCOs PLL with Integrated VCO, RF VCOs PLL with Integrated VCO, Wideband PLL with Integrated VCO, RF VCOs PLL with Integrated VCO, RF VCOs PLL with Integrated VCO, RF VCOs PLL with Integrated VCO, RF VCOs PLL with Integrated VCO, RF VCOs PLL with Integrated VCO, RF VCOs Switches, SPDT Power Conditioning, Voltage Regulator Programmable Divider Amplifiers, Linear & Power Filter - Tunable, Low Pass Filter - Tunable, Low Pass Filter - Tunable, Band Pass Filter - Tunable, Band Pass QTR: 05006 Rev: 02 HMC892LP5E HMC893LP5E HMC894LP5E HMC897LP4E HMC899LP4E HMC900LP5E HMC902LP3E HMC903LP3E HMC905LP3E HMC907LP5E HMC909LP4E HMC914LP4E HMC915LP4E HMC916LP3E HMC917LP3E HMC920LP5E HMC921LP4E HMC922LP4E HMC926LP5E HMC928LP5E HMC929LP4E HMC931LP4E HMC932LP4E HMC933LP4E HMC935LP5E HMC936LP6E HMC942LP4E HMC943LP5E HMC948LP3E HMC951LP4E HMC960LP4E HMC965LP5E HMC966LP4E HMC967LP4E HMC972LP5E HMC973LP3E Hittite Microwave Corporation is committed to: Filter - Tunable, Band Pass Filter - Tunable, Band Pass Filter - Tunable, Band Pass Filter - Tunable, Band Pass Filter - Tunable, Band Pass IF/Baseband Processing, Dual Baseband Low Pass Filter Amplifier, Low Noise Amplifier, Low Noise Programmable Freq. Divider Amplifier, Wideband (Distributed) RMS Power Detector Limiting Amplifier Mixers, High IP3 Frequency Multiplier, Active Frequency Multiplier, Active Active Bias Controller Amplifiers, Linear & Power Switches, SPDT Digital VGA Phase Shifter, Analog Phase Shifter, Analog Phase Shifter, Analog Phase Shifter, Analog Phase Shifter, Analog Phase Shifter, Analog Phase Shifter, Digital Frequency Multiplier, Active Amplifiers, Linear & Power Power Detectors, Log Detector Mixers, I/Q Upconverter IF/Baseband Processing, Dual Digital VGA w/ Driver Amplifiers, Linear & Power Mixers, Downconverter RFIC Mixers, Downconverter RFIC Variable Gain Amplifier, Analog Attenuator, Analog Hittite’s employees recognize the responsibility to: • Supplying products of the highest quality • Advance in state-of-the-art technology that supports our products • Enhance our competitive position with superior product standards • Take the initiate to ensure product quality • Create an environment where the highest standards are maintained • Continue to improve quality practices 20 Alpha Road, Chelmsford, MA 01824 978-250-3343 tel • 978-250-3373 fax • www.hittite.com • sales@hittite.com Part Type: Plastic Encapsulated Package Family QFN HMC976LP3E HMC977LP4E HMC981LP3E HMC996LP4E HMC1010LP4E HMC1020LP4E HMC1021LP4E HMC1030LP5E HMC1097LP4E HMC340LP5E QTR: 05006 Rev: 02 DC Power Conditioning, Linear Voltage Regulator I/Q Downconverter / Receiver DC Power Management, Active Bias Controller Variable Gain Amplifier RMS Power Detector RMS Power Detector RMS Power Detector Dual RMS Power Detector Modulators, Wideband Direct Quadrature Obsolete Products I/Q Mixer / IRM Hittite Microwave Corporation is committed to: Hittite’s employees recognize the responsibility to: • Supplying products of the highest quality • Advance in state-of-the-art technology that supports our products • Enhance our competitive position with superior product standards • Take the initiate to ensure product quality • Create an environment where the highest standards are maintained • Continue to improve quality practices 20 Alpha Road, Chelmsford, MA 01824 978-250-3343 tel • 978-250-3373 fax • www.hittite.com • sales@hittite.com QTR: 05006 Rev: 02 1.0 Introduction This qualification procedure was designed to satisfy the package reliability requirements for a plastic Quad-Flat Nolead (QFN) surface mount package. The testing was designed to simulate the worst-case environments the product may experience during assembly, test and life in the end user application. The device was electrically tested to the appropriate catalog specifications. The HMC311LP3 and HMC347LP3 were selected to qualify the QFN package family. The qualification plan has three subgroups: 1. Temperature Cycling 2. Autoclave 3. THB 1.1 General Description The QFN package uses a copper lead frame. The lead frame is spot plated with silver to enable gold wire bonding. The MMIC device is epoxy attached to the paddle using silver filled epoxy. The MMIC contains gold bond pads. The interconnection is performed using 1 mil gold ball bonds. The part is encapsulated using Sumitomo EME series encapsulating compound. The terminals and ground paddle are finished with 85/15 SnPb or Matte Sn. Photo 1 The HMC311LP3 is a GaAs InGaP Heterojunction Bipolar Transistor (HBT) Gain Block MMIC SMT Typical QFN Packages DC to 6 GHz amplifier. This 3x3mm QFN packaged amplifier can be used as either a cascadable 50 Ohm gain stage or to drive the LO of HMC mixers with up to +17 dBm output power. The HMC311LP3 offers 14.5 dB of gain and an output IP3 of +30 dBm while requiring only 56 mA from a +5V supply. The Darlington feedback pair used results in reduced sensitivity to normal process variations and yields excellent gain stability over temperature while requiring a minimal number of external bias components. The HMC347LP3 is a broadband high isolation non-reflective GaAs MESFET SPDT switch in a low cost leadless QFN surface mount plastic package. Covering DC to 14 GHz, the switch offers high isolation and low insertion loss. The switch features >50 dB isolation up to 3 GHz and >40 dB isolation up to 13 GHz. The switch operates using complementary negative control voltage logic lines of -5/0V and requires no bias supply. 2.0 Summary of Results All testing has been completed. There were no failures in any subgroup. The device meets the requirements for a reliable Quad Flat No-lead Plastic encapsulated package. PARA TEST QTY IN QTY OUT PASS / FAIL NOTES 3.1 Sample Selection 90 45 90 45 Pass / No Failures HMC311LP3 HMC347LP3 3.2 Initial Electrical Characterization (+25) 90 45 90 45 Pass / No Failures HMC311LP3 HMC347LP3 3.3 Temperature Cycling Exposure 45 45 Complete HMC311LP3 3.4 Electrical Test 45 45 Pass / No Failures 3.5 Autoclave Exposure 45 45 Complete 3.6 Electrical Test 45 45 Pass / No Failures 3.7 85/85 THB Exposure 45 45 Pass / No Failures 3.8 Electrical Test 45 45 Pass / No Failures HMC311LP3 HMC347LP3 20 Alpha Road, Chelmsford, MA 01824 978-250-3343 tel • 978-250-3373 fax • www.hittite.com • sales@hittite.com Page - 6 QTR: 05006 Rev: 02 3.0 Test Procedure 3.1 Sample Selection: Using parts from stock that met acceptance test requirements, 90 HMC311LP3 and 45 HMC347LP3 parts were obtained from stock and divided into 3 subgroups: 1. (45) Temperature Cycling 2. (45) Autoclave 3. (45) Temperature Humidity Bias 3.2 Pre-Test Screening: Baseline electrical test was performed on all the parts from 3.1 at +25°C per the device ATP. The test read and recorded 100% of the data. There were no failures in this initial test. 3.3 Temperature Cycling: Temperature cycling exposure was performed on 45 parts from subgroup 1 per JESD22-Al04-A condition B (-65 to +150) for a minimum of 500 cycles. This test was performed by Assurance Technology Corp. in Chelmsford, MA. 3.4 Electrical Test: Electrical test was performed on 45 parts from 3.3 at +25°C per the device ATP. The test read and recorded 100% of the data. There were no failures in this subgroup. 3.5 Autoclave: Autoclave exposure was performed on 45 parts from subgroup 2 per JESD22-Al02-B condition C (+121°C, 100% RH, 15 PSI) for a minimum of 96 hours. 3.6 Electrical Test: Electrical test was performed on 45 parts from 3.5 at +25°C per the device ATP. Electrical testing was performed no sooner than 2 hours and no later that 48 hours after exposure. The test read and recorded 100% of the data. 3.7 Temp/Humidity/Bias Test (THB): Temperature/Humidity/Bias exposure was performed on 45 parts from subgroup 3 (+85°C, 85% RH, 5v) for a minimum of 1000 hours. 3.8 Electrical Test: Electrical test was performed on 45 parts from 3.7 at +25°C per the device ATP. Electrical testing was performed no sooner than 2 hours and no later that 48 hours after exposure. The test read and recorded 100% of the data. There were no failures in this subgroup. 20 Alpha Road, Chelmsford, MA 01824 978-250-3343 tel • 978-250-3373 fax • www.hittite.com • sales@hittite.com Page - 7 QTR: 05006 Rev: 02 LP2 - Package Dimensions NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Suggested Land Pattern Package Information Part Number Suffix Package Body Material Lead Finish LP2 RoHS Compliant Mold Compound Sn/Pb Solder MSL1 LP2E RoHS Compliant Mold Compound 100% matte Sn MSL1 [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C MSL Rating Package Marking [3][4] [1] NNN XXX [2] NNN XXX [3] 4-Digit lot number XXXX [4] 3-Digit part number NNN 20 Alpha Road, Chelmsford, MA 01824 978-250-3343 tel • 978-250-3373 fax • www.hittite.com • sales@hittite.com Page - 8 QTR: 05006 Rev: 02 LP3 - Package Dimensions NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Suggested Land Pattern Package Information Part Number Suffix Package Body Material Lead Finish LP3 RoHS Compliant Mold Compound Sn/Pb Solder MSL1 LP3E RoHS Compliant Mold Compound 100% matte Sn MSL1 [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C MSL Rating Package Marking [3][4] [1] NNN XXXX [2] NNN XXXX [3] 4-Digit lot number XXXX [4] 3-Digit part number NNN 20 Alpha Road, Chelmsford, MA 01824 978-250-3343 tel • 978-250-3373 fax • www.hittite.com • sales@hittite.com Page - 9 QTR: 05006 Rev: 02 LP4 - Package Dimensions NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Suggested Land Pattern Package Information Part Number Suffix Package Body Material Lead Finish LP4 RoHS Compliant Mold Compound Sn/Pb Solder MSL1 LP4E RoHS Compliant Mold Compound 100% matte Sn MSL1 [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C MSL Rating Package Marking [3][4] [1] HNNN XXXX [2] HNNN XXXX [3] 4-Digit lot number XXXX [4] 3-Digit part number NNN 20 Alpha Road, Chelmsford, MA 01824 978-250-3343 tel • 978-250-3373 fax • www.hittite.com • sales@hittite.com Page - 10 QTR: 05006 Rev: 02 LP5 - Package Dimensions NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Suggested Land Pattern Package Information Part Number Suffix Package Body Material Lead Finish LP4 RoHS Compliant Mold Compound Sn/Pb Solder MSL1 LP4E RoHS Compliant Mold Compound 100% matte Sn MSL1 [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C MSL Rating Package Marking [3][4] [1] HNNN XXXX [2] HNNN XXXX [3] 4-Digit lot number XXXX [4] 3-Digit part number NNN 20 Alpha Road, Chelmsford, MA 01824 978-250-3343 tel • 978-250-3373 fax • www.hittite.com • sales@hittite.com Page - 11 QTR: 05006 Rev: 02 LP6 - Package Dimensions NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Suggested Land Pattern Package Information Part Number Suffix Package Body Material Lead Finish LP6 RoHS Compliant Mold Compound Sn/Pb Solder MSL1 LP6E RoHS Compliant Mold Compound 100% matte Sn MSL1 [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C MSL Rating Package Marking [3][4] [1] HNNN XXXX [2] HNNN XXXX [3] 4-Digit lot number XXXX [4] 3-Digit part number NNN 20 Alpha Road, Chelmsford, MA 01824 978-250-3343 tel • 978-250-3373 fax • www.hittite.com • sales@hittite.com Page - 12