ENGR45 Materials Lab Cantilever Beam Fixture Bruce Mayer, PE Licensed Electrical & Mechanical Engineer BMayer@ChabotCollege.edu Engineering & Engineering-Technology: Materials of Engineering 1 Bruce Mayer, PE BMayer@ChabotCollege.edu • Matls-Lab_Cantilever_Beam_Fixture.ppt Introduction EXTRA CREDIT for any Student, or team of Students that Constructs a Cantilever-Beam Deflection Fixture • Credit Amount = 50% of a Typical Lab – about 0.75% of the Final grade • If a Team Effort, then the Beam-pts Will be DIVIDED Equally among Team Members Due Date = Day of Beam Lab • Constructor(s) get PRIORITY Use of Fixture During the Beam Labs Engineering & Engineering-Technology: Materials of Engineering 2 Bruce Mayer, PE BMayer@ChabotCollege.edu • Matls-Lab_Cantilever_Beam_Fixture.ppt Introduction, cont. After Constructors have Completed the Beam Labs, other Students will be allowed to use the Fixture Donations GrateFully Accepted • At the Completion of last Beam Lab, the constructor(s) May DONATE the Fixture to the Materials Engineering Laboratory – Future Generations of Chabot Engineers and will be forever grateful Engineering & Engineering-Technology: Materials of Engineering 3 Bruce Mayer, PE BMayer@ChabotCollege.edu • Matls-Lab_Cantilever_Beam_Fixture.ppt Overall View Engineering & Engineering-Technology: Materials of Engineering 4 Bruce Mayer, PE BMayer@ChabotCollege.edu • Matls-Lab_Cantilever_Beam_Fixture.ppt Clamping Plate 0.28” Ø, 4X 2”-2.25” 3.25”-3.5” 2.38”-2.5” 3.5”-4” Engineering & Engineering-Technology: Materials of Engineering 5 Bruce Mayer, PE BMayer@ChabotCollege.edu • Matls-Lab_Cantilever_Beam_Fixture.ppt Clamping Hardware 1/4-20 x 3.5” Hex Hd Bolt and Washer 1/4-20 Thru-Knob Engineering & Engineering-Technology: Materials of Engineering 6 Bruce Mayer, PE BMayer@ChabotCollege.edu • Matls-Lab_Cantilever_Beam_Fixture.ppt Notes Student(s) to Provide all Materials • Including Clamping Hardware Structural Material may be WOOD or METAL Structural Joining Method may be any Combination of: Screws, Bolts, Welds, Adhesives Be CREATIVE in Design, Construction, and Materials/Hardware Selection Engineering & Engineering-Technology: Materials of Engineering 7 Bruce Mayer, PE BMayer@ChabotCollege.edu • Matls-Lab_Cantilever_Beam_Fixture.ppt Rear Views Engineering & Engineering-Technology: Materials of Engineering 8 Bruce Mayer, PE BMayer@ChabotCollege.edu • Matls-Lab_Cantilever_Beam_Fixture.ppt