Engineering 11 Tank Agitator CrDR MockUp Bruce Mayer, PE Registered Electrical & Mechanical Engineer BMayer@ChabotCollege.edu Engineering 11 – Engineering Design 1 Bruce Mayer, PE BMayer@ChabotCollege.edu • ENGR-11_CrDR_Tank_MockUp.ppt Design Presentation - CrDR CRITICAL Design Review (CrDR) • By Team Members M3 & M4 • Detailed Layout and Schematics • Engineering Physical Analyses – Force/Loading – Corrosion/Wear – Energy/Power • Materials & Component Selection • 90+% Accurate $-Cost Estimate Engineering 11 – Engineering Design 2 Bruce Mayer, PE BMayer@ChabotCollege.edu • ENGR-11_CrDR_Tank_MockUp.ppt Design Presentation - CrDR • First-Cut Drawing Package – Parts, Assy, Schematic – Bill of Material With Part Numbers – Sources of Supply for Purchase Parts Phone Numbers of Suppliers Catalog Number for Purchase Parts • FINAL Cost Estimate to ±5% • Demonstrate MockUp or Working Prototype (extra credit) – Attach to MockUp Tank Provided by the Instructor Engineering 11 – Engineering Design 3 Bruce Mayer, PE BMayer@ChabotCollege.edu • ENGR-11_CrDR_Tank_MockUp.ppt AutoCAD Tank Template Template Posted to WebPage SeaWater_Tank_Template_E11 -0001_BMayer_090714.DWG Engineering 11 – Engineering Design 4 Bruce Mayer, PE BMayer@ChabotCollege.edu • ENGR-11_CrDR_Tank_MockUp.ppt Tank MockUp Designed and Built by the Engineering 11 Instructor • 5¼” Circular Saw • 3/8” CordLess Drill • 6”, 90° Corner Brackets • ¼-20 Bolts, Nuts, Washers Engineering 11 – Engineering Design 5 Bruce Mayer, PE BMayer@ChabotCollege.edu • ENGR-11_CrDR_Tank_MockUp.ppt Student Use of Tank MockUp Students are Encouraged to Install any MockUp or ProtoType Wave Agitators to the MockUp Tank using Hand Tools for: • Drilling • Sawing/Cutting • Clamping • Other? Engineering 11 – Engineering Design 6 All MockUp work will be Done in Rm1612 • After CrDr in Rm905 Bruce Mayer, PE BMayer@ChabotCollege.edu • ENGR-11_CrDR_Tank_MockUp.ppt Appendix: MockUp Supplies Nominal ½” PlyWood 5/16” x 1¼” Fender Washers 6” Corner Brackets Drill Bit Set ¼-20 CordLess PowerDrill & Charger • 1-½” Round-Hd Phillips Screws • Nuts ¼” Washers: Flat & Split Engineering 11 – Engineering Design 7 7/16” Wrench Ratcheting No. 2 Phillips ScrewDriver Work Gloves Bruce Mayer, PE BMayer@ChabotCollege.edu • ENGR-11_CrDR_Tank_MockUp.ppt