I N T E R I O R
S I G N A G E
March 21 2014 • DRAFT ISSUE
N. B. This sign age document consists of 24 pages. All pages are to be read as one document. Refer to notes and conditions on page #1 of this document.
Fabrication Types
General Notes
1 - This signage document consists of 24 pages. All page are to be read as
one document. These sole purpose of this document is to show preliminary
design concepts and design intent of sign types only.
2 - Prior to fabrication and/or installation of any of these sign types the
user of this document must arrange for the fabrication of one full size sample
of each sign type along with documentation demonstrating the intended use
for review and approval by SFU facilities management along with all authorities
having jurisdiction plus a professional Code Consultant, Architect and
Structural Engineer each registered in the Province of British Columbia..
3 - Anyone using and/or relying on any information shown in this
document is to ensure prior to placing any work in hand, that all such
information is reviewed and approved by all authorities having
jurisdiction plus a professional Code Consultant, Architect and
Structural Engineer registered in the Province of British Columbia.
4 - Discovery .1 and the Chemistry building are examples where
similar signs have been installed. These signs exist as fabrication
standards for like work.
5 - When a sign type is composed of more than one Sign Part
additional layers of acrylic must be added to the sign parts (of lesser
thickness) to ensure that the faces of each sign apart are equal and
flush with the adjacent sign part.
6 - Sign types applied to glazing must be either:
a - backed up on opposing face of glazing where indicated, by a sign type
of equal size, shape and location, or
b - where a back up sign is not required, a layer of opaque black vinyl of
equal size, shape and location is to be applied to the first surface of the
glazing to which the room sign is then mounted.
7 - Paint, Ink and acrylic colours :
a - Black
b - White
c - Red - to match Pantone 187C.
d - Silver Grey - to match silver anodized aluminum.
e - Blue - to match the existing Blue Station units.
FAB
00
10 - Attachments for all signs are to be designed, reviewed and
approved by a Structural Engineer experienced in similar work before
fabrication and post installation.
11 - The user of this document and their engineer remain responsible for the
Code complience design, engineering, fabrication and installation of all signs.
Fabrication Type.00 (blank)
• Sign face - One layer of 1/8”clear non glare acrylic painted
black sub-surface.
• Attachement - Double sided acrylic tape and silicone caulking.
09
FAB
FAB
01
FAB
02
FAB
03
FAB
04
FAB
05
10
Fabrication Type.01 (+ logo)
As per Fabrication Type.00 plus:
• SFU logo & Graphics - Screen printed red and white
sub-surface.
Fabrication Type.02 (+ tactile)
As per Fabrication Type.01 plus:
• Room number/Name - White Gravotac first surface.
Fabrication Type.03 (+ braille)
As per Fabrication Type.02 plus:
• Braille - Type 2 Braille beads first surface.
FAB
11
Fabrication Type.04 (+ insert)
As per Fabrication Type.03 plus:
• Sign face - One layer of 1/8”clear non glare acrylic painted
black sub-surface with knock-out to form window for insert.
• Rear panel - One layer of 1/8”clear acrylic painted black first
surface applied to rear of sign face with 1/16” thick double sided
acrylic tape.
Fabrication Type.06 (w/r door)
• Sign face - One layer of 1/8”clear non glare acrylic painted
black sub-surface.
• Room number/Copy/Icon - White Gravotac first surface.
• Attachment - Double sided acrylic tape and silicone caulking.
FAB
Fabrication Type.07 (w/r wall)
As per Fabrication Type.06 plus:
• Braille - Type 2 Braille beads first surface.
FAB
Fabrication Type.08 (prohib)
Graphics and Icons • 6 individual circular window graphic
decals - Red, /Black graphics printed on to 3M self adhesive
white vinyl mounted subsurface to 3M self adhesive clear
vinyl mounted subsurface of glazing.
06
07
08
Fabrication Type.09 (project)
Two back to back sign faces as per Fabrication Type.06 plus:
• 1/8” aluminum ‘T’ wall bracket paint finished low sheen silver
grey.
• Wall attachment as specified by fabricators engineer.
Fabrication Type.10 (suspend)
• Two back to back sign faces consisting one layer of 1/8”clear
non glare acrylic painted black sub-surface.
• Direction arrow circular disk - One layer of 1/16”clear non glare
acrylic, screen printed red sub-surface c/w with white Gravotac
arrow first surface.
• Copy - screen printed white.
• Middle layer - One layer of 1/4” black acrylic.
• Attachment of sign faces to middle layer - Double sided
acrylic tape and silicone caulking.
• Suspension - Aircraft cable and/or stainless steel post as per
fabricators structural engineers specification.
Fabrication Type.11 (stair #)
• 1/8” thick black acyclic numerals.
• Attachement - Double sided acrylic tape and silicone caulking.
Fabrication Type.05 (notice)
• Sign face - One layer of 1/8”clear non glare acrylic painted
black sub-surface with knock-out to form window for insert/s.
• Rear panel - One layer of 1/8”clear acrylic painted black first
surface applied to rear of sign face with 1/16” thick double sided
acrylic tape.
• Attachment - Double sided acrylic tape and silicone caulking.
FAB
8 - Fonts
a - SFU logo
b - Din Medium
9 - All signs are to be fabricated with smooth polished edges free
of sharp edges. Corners of all materials are to be polished with a minimum
1/8” radius.
FAB
Simon Fraser University
Burnaby Campus.
8888 University Drive,
Burnaby
British Columbia.
V5A 1S6
Raven Design Consultants
6955 Hycroft Road,
West Vancouver,
British Columbia.
V7W 2K6
T • 604 921 9400
F • 604 921 6070
E • raven@ravendesign.ca
SFU
INTERIOR
SIGNAGE
NOTES
& FAB
TYPES
Drg: 01
Rev: 0
Scale: NTS
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
12 - Prior to the fabrication or installation of any sign type the
user of this document must ensure that any sign intened for fabrication is in
accordance with the most recent BC Building code and ADA regulations.
N.B. This signage document consists of 24 pages. All pages are to be read as one document. Refer to notes and conditions on page #1 of this document.
Sign Types - Key Icons
Sign Type - Key Icons
Directories
DR.1
DR.2
DR.3
DR.4
DR.5
Room Signs
DR.6
Directory Wall Directory Wall Directory Wall Directory Wall Directory Wall Directory Wall
Sign DR.6
Sign DR.1
Sign DR.2
Sign DR.3
Sign DR.4
Sign DR.5
R.01
R.02
R.03
R.04
R.05
R.06
Room Wall
Sign R.01
Room Wall
Sign R.02
Room Wall
Sign R.03
Room Wall
Sign R.04
Room Wall
Sign R.05
Room Wall
Sign R.06
Simon Fraser University
Burnaby Campus.
8888 University Drive,
Burnaby
British Columbia.
V5A 1S6
Door Signs
C7000
C7000
Washroom
Door Sign
C7000
C7000
C7000
C7000
C7000
C7000
C7000
Change Room Women’s W’rm Women’s Ch’g Women’s Acc
Door Sign
Door Sign
Door Sign
Door Sign
C7000
Men’s W’rm
Door Sign
C7000
FDKC
PRINTER
ROOM
LOCKERS
C7000
C7000
Baby Change Blue Station
Door Sign
Door Sign
AWS
Fire Door Sign Door Sign
Fire Door Keep Alarm Will
Closed. FDKC Sound. AWS
C7000
Men’s Change Men’s Acc’ble Bikes
Door Sign
Door Sign
Door Sign
blue
C7000
C7000
First Aid
Door Sign
NSF.1
Wall Sign No
Smoke/Food
NSF.1
C7000
Coats
Door Sign
C7000
Elevator
Door Sign
PD.1
PD.2
Door Sign
Prohibition
PD.1
Door Sign
Prohibition
PD.2
C7000
Water Fountain Stairs
Door Sign
Door Sign
C7000
Lockers
Door Sign
Change Room Women’s W’rm Women’s Ch’g Women’s Acc
Large Wall
Large Wall
Large Wall
Large Wall
Sign
Sign
Sign
Sign
Printer Room
Door Sign
NOTE
Door Sign
Notice Holder
NOTE
Men’s W’rm
Large Wall
Sign
Men’s Change Men’s Acc’ble Bikes
Large Wall Large Wall
Large Wall
Sign
Sign
Sign
blue
Baby Change
Large Wall
Sign
Blue Station
Large Wall
Sign
LOCKERS
First Aid
Large Wall
Sign
Coats
Large Wall
Sign
Elevator
Large Wall
Sign
Water Fountain Stairs
Large Wall
Large Wall
Sign
Sign
Lockers
Large Wall
Sign
R.12
R.13
R.14
R.15
R.16
Room Wall
Sign R.11
Room Wall
Sign R.12
Room Wall
Sign R.13
Room Wall
Sign R.14
Room Wall
Sign R.15
Room Wall
Sign R.16
R.21
R.22
R.23
R.24
R.25
R.26
Room Wall
Sign R.21
Room Wall
Sign R.22
Room Wall
Sign R.23
Room Wall
Sign R.24
Room Wall
Sign R.25
Room Wall
Sign R.26
R.31
R.32
R.33
R.34
R.35
R.36
Room Wall
Sign R.31
Room Wall
Sign R.32
Room Wall
Sign R.33
Room Wall
Sign R.34
Room Wall
Sign R.35
Room Wall
Sign R.36
R.41
R.42
R.43
R.44
R.45
R.46
Room Wall
Sign R.41
Room Wall
Sign R.42
Room Wall
Sign R.43
Room Wall
Sign R.44
Room Wall
Sign R.45
Room Wall
Sign R.46
R.51
R.52
R.53
R.54
R.55
R.56
Room Wall
Sign R.51
Room Wall
Sign R.52
Room Wall
Sign R.53
Room Wall
Sign R.54
Room Wall
Sign R.55
Room Wall
Sign R.56
R.61
R.62
R.63
R.64
R.65
R.66
Room Wall
Sign R.61
Room Wall
Sign R.62
Room Wall
Sign R.63
Room Wall
Sign R.64
Room Wall
Sign R.65
Room Wall
Sign R.66
K
C
C7000
Walls Signs
Washroom
Large Wall
Sign
R.11
Raven Design Consultants
6955 Hycroft Road,
West Vancouver,
British Columbia.
V7W 2K6
T • 604 921 9400
F • 604 921 6070
E • raven@ravendesign.ca
SFU
INTERIOR
SIGNAGE
Door/Wall
Sign KC
SIGN
PART
& TYPE
KEY
ICONS
PRINTER
ROOM
assist
Wall Sign Accessible
Washroom Distress Button
Directories
Instructions
assist
ACRYLIC
Washroom
Small Wall
Sign
Change Room Women’s W’rm Women’s Ch’g Women’s Acc
Small Wall
Small Wall
Small Wall Small Wall
Sign
Sign
Sign
Sign
Men’s W’rm
Small Wall
Sign
Men’s Change Men’s Acc’ble Bikes
Small Wall
Small Wall
Small Wall
Sign
Sign
Sign
blue
Baby Change Blue Station
Small Wall
Small Wall
Sign
Sign
F#.1
F#.2
LOCKERS
First Aid
Small Wall
Sign
#
F .3
Coats
Small Wall
Sign
F#.4
Wall Sign
Wall Sign
Wall Sign
Wall Sign
Floor Number Floor Number Floor Number Floor Number
F#.1
F#.2
F#.3
F#.4
Elevator
Small Wall
Sign
S#.1
Wall Sign
Stair Number
S#.1
Water Fountain Stairs
Small Wall
Small Wall
Sign
Sign
S#.2
Wall Sign
Stair Number
S#.2
ITOM
Lockers
Small Wall
Sign
ICOF
PRINTER
ROOM
VINYL
Printer Room
Small Wall
Sign
Washroom
Projecting
Sign
C7000
C7000
C7000
FROST CUBE
Wall Sign
Wall Sign
Instruct’s To
In Case Of
Occupants Map Fire ICOF
Change Room Women’s W’rm Women’s Ch’g Women’s Acc
Projecting
Projecting
Projecting
Projecting
Sign
Sign
Sign
Sign
Men’s W’rm
Projecting
Sign
C7000
C7000
C7000
Baby Change Blue Station
Projecting
Projecting
Sign
Sign
1.6.4
One blade
6’x 4”Hanging
Directional
Sign 1.6.4
1.6.5
One blade
6’x 5”Hanging
Directional
Sign 1.6.5
1.6.6
One blade
6’x 6”Hanging
Directional
Sign 1.6.6
1.6.7
One blade
6’x 7”Hanging
Directional
Sign 1.6.7
2.6.4
Two blade
6’x 4”Hanging
Directional
Sign 2.6.4
2.6.5
Two blade
6’x 5”Hanging
Directional
Sign 2.6.5
2.6.6
Two blade
6’x 6”Hanging
Directional
Sign 2.6.6
2.6.7
Two blade
6’x 7”Hanging
Directional
Sign 2.6.7
C7000
First Aid
Projecting
Sign
3.6.4
Three blade
6’x 4”Hanging
Directional
Sign 3.6.4
3.6.5
Three blade
6’x 5”Hanging
Directional
Sign 3.6.5
3.6.6
C7000
Coats
Projecting
Sign
1.8.4
One blade
8’x 4”Hanging
Directional
Sign 1.8.4
1.8.5
One blade
8’x 5”Hanging
Directional
Sign 1.8.5
1.8.6
Three blade One blade
6’x 6”Hanging 8’x 6”Hanging
Directional Directional
Sign 1.8.6
Sign 3.6.6
3.6.7
Three blade
6’x 7”Hanging
Directional
Sign 3.6.7
1.8.7
One blade
8’x 7”Hanging
Directional
Sign 1.8.7
P.01
P.03
P.02
P.04
P.05
LOCKERS
C7000
Elevator
Projecting
Sign
2.8.4
Two blade
8’x 4”Hanging
Directional
Sign 2.8.4
2.8.5
Two blade
8’x 5”Hanging
Directional
Sign 2.8.5
2.8.6
Two blade
8’x 6”Hanging
Directional
Sign 2.8.6
2.8.7
Two blade
8’x 7”Hanging
Directional
Sign 2.8.7
C7000
C7000
Water Fountain Stairs
Projecting
Projecting
Sign
Sign
3.8.4
Three blade
8’x 4”Hanging
Directional
Sign 3.8.4
3.8.5
Three blade
8’x 5”Hanging
Directional
Sign 3.8.5
3.8.6
Three blade
8’x 6”Hanging
Directional
Sign 3.8.6
3.8.7
Three blade
8’x 7”Hanging
Directional
Sign 3.8.7
1.10.4
C7000
Lockers
Projecting
Sign
2.10.4
C7000
PRINTER
ROOM
P.07
P.08
P.09
2.10.5
Printer Room
Projecting
Sign
Suspended
Signs
3.10.4
3.10.5
One blade
Two blade
Three blade
10’x 5”Hanging 10’x 5”Hanging 10’x 5”Hanging
Directional
Directional
Directional
Sign 1.10.5
Sign 2.10.5
Sign 3.10.5
1.10.6
2.10.6
3.10.6
One blade
Two blade
Three blade
10’x 6”Hanging 10’x 6”Hanging 10’x 6”Hanging
Directional
Directional
Directional
Sign 1.10.6
Sign 2.10.6
Sign 3.10.6
1.10.7
2.10.7
P.06
P10
Room Wall
Sign Part P.07
Room Wall
Sign Part P.08
P.07.2
P.08.2
P.09.2
Room Wall
Sign Part P.7.2
Room Wall
Sign Part P.8.2
Room Wall
Sign Part P.9.2
P.07.3
P.08.3
P.09.3
Room Wall
Sign Part P.7.3
Room Wall
Sign Part P.8.3
Room Wall
Sign Part P.8.3
Room Wall
Sign Part P.10
Room Wall
Sign Part
P.09
P10.2
C7000
One blade
Two blade
Three blade
10’x 4”Hanging 10’x 4”Hanging 10’x 4”Hanging
Directional
Directional
Directional
Sign 1.10.4
Sign 2.10.4
Sign 3.10.4
1.10.5
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
Room Wall
Room Wall
Room Wall
Room Wall
Room Wall
Room Wall
Sign Part P.01 Sign Part P.02 Sign Part P.03 Sign Part P.04 Sign Part P.05 Sign Part P.06
Men’s Change Men’s Acc’ble Bikes
Projecting
Projecting
Projecting
Sign
Sign
Sign
blue
C7000
Sign Parts - Key Icons
C7000
C7000
Scale: NTS
Sign Parts
Projecting
Signs
C7000
Drg: 02
3.10.7
One blade
Two blade
Three blade
10’x 7”Hanging 10’x 7”Hanging 10’x 7”Hanging
Directional
Directional
Directional
Sign 1.10.7
Sign 2.10.7
Sign 3.10.7
P10.3
P.07.4
P.08.4
P.09.4
Room Wall
Sign Part P.7.4
Room Wall
Sign Part P.8.4
Room Wall
Sign Part P.9.4
P.07.5
P.08.7
P.09.5
Room Wall
Sign Part P.7.5
Room Wall
Sign Part P.8.5
Room Wall
Sign Part P.9.5
P.11
Room Wall
Sign Part
P.11
Room Wall
Sign Part P.10.2
Room Wall
Sign Part P.10.3
P10.4
Room Wall
Sign Part P.10.4
March 21 2014 • DRAFT ISSUE
P10.5
Room Wall
Sign Part P.10.5
P.12
P.13
P.14
P.15
P.16
Room Wall
Sign Part
P.12
Room Wall
Sign Part
P.13
Room Wall
Sign Part
P.14
Room Wall
Sign Part
P.15
Room Wall
Sign Part
P.16
N.B. This signage document consists of 24 pages. All pages are to be read as one document. Refer to notes and conditions on page #1 of this document.
004
002
2
R.3
2
6
001
2
BUI
LDI
NG
NAM
E
Fac
ulty
/De
par
t Na
Occ
me
upa
nts
Nam
e
DIR
ECT
.DR.
3
DIR
ECT
.DR.
1
1234
IN C
A
U SE SE OF
EXIT FIR
E
DO
S
NOT TAIRS
ELE US
VAT E
ORS
1234
ELE
CTR
ICAL
FIR E
DOO
R
KEE
P
CLO
SED
A
000
00
0
0
0
0
000
001
2
000
000000
LOLOCC K
K0 0 0E0000E0RR S
0000
S
Raven Design Consultants
6955 Hycroft Road,
West Vancouver,
British Columbia.
V7W 2K6
T • 604 921 9400
F • 604 921 6070
E • raven@ravendesign.ca
SFU
INTERIOR
SIGNAGE
1234
LAR
SOU M WIL
L
N
D
DOO WHE
R OP N
ENE
D
Simon Fraser University
Burnaby Campus.
8888 University Drive,
Burnaby
British Columbia.
V5A 1S6
SIGN
TYPES
3D
VIEWS
Drg: 03
Rev: 0
Scale: NTS
21.10.13
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
N.B. This signage document consists of 24 pages. All pages are to be read as one document. Refer to notes and conditions on page #1 of this document.
1”
(SFU LOGO)
1.2”
Room Wall
Sign Part P.05
All corners of sign
1/8” radius
Typical for all signs
05
8.5”
1”
Room Wall
Sign Part P.01
ROOM #
4.35”
0.75” 0.45” 0.75”
0.25”
P.02a
All corners of sign
1/8” radius
Typical for all signs
1”
5.1”
04
1.2”
(SFU LOGO)
8.5”
1/8” min typ all signs
0.6” 0.75”
RM # or DIR
2.7”
0.2”
0.4”
FAB
P.15
01
Room Wall
Sign Part
P.15
05
Type 2 Braille
1.95”
05
8.5”
P.07.2
05
P.08.2
17”
05
Room Wall
Sign Part P.8.2
05
Room Wall
Sign Part P.7.3
P.08.3
25.5”
0.6”
2.0”
2.0”
1.95”
P.16
Room Wall
Sign Part
P.16
01
P.08.4
34”
Room Wall
Sign Part P.7.5
05
05
P.08.7
42.5”
Room Wall
Sign Part P.8.5
01
34”
05
FAB
FAB
01
P.10.2
Room Wall
Sign Part P.9.2
17”
03
Room Wall
Sign Part P.10.2
P.09.3
01
P.09.4
P10.3
01
Room Wall
Sign Part P.10.3
25.5”
FAB
P.10.4
34”
03
Room Wall
Sign Part P.10.4
34”
FAB
FAB
P.09.5
03
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
25.5”
FAB
17”
FAB
FAB
Room Wall
Sign Part P.9.5
42.5”
03
Room Wall
Sign Part P.10
Room Wall
Sign Part
P.09
P.09.2
P.10
Room Wall
Sign Part P.9.4
FAB
FAB
P.07.5
25.5”
Room Wall
Sign Part P.8.4
P.09
All corners of sign
1/8” radius
Typical for all signs
FAB
Room Wall
Sign Part P.8.3
FAB
05
Room Wall
Sign Part P.7.4
05
Room Wall
Sign Part P.8.3
FAB
P.07.4
17”
FAB
FAB
P.07.3
2 - Sign types applied to glazing must be either:
a - backed up on opposing face of glazing where
indicated, by a sign type of equal size, shape and
location, or
b - where a back up sign is not required, a layer of
opaque black vinyl of equal size, shape and location is
to be applied to the first surface of the glazing to
which the room sign is then mounted.
FAB
Room Wall
Sign Part P.7.2
FAB
NOTES
1 - When a sign type is composed of more than one
Sign Part additional layers of acrylic must be added
to the sign parts (of lesser thickness) to ensure that
the faces of each sign part are equal and flush with
the adjacent sign part.
Room Wall
Sign Part P.08
FAB
0.5”
0.5”
FAB
P.08
Room Wall
Sign Part P.07
All corners of sign
1/8” radius
Typical for all signs
6.1”
P.07
0.5”
FAB
All corners of sign
1/8” radius
Typical for all signs
Rev: 0
Scale: NTS
8.5”
FAB
All corners of sign
1/8” radius
Typical for all signs
Drg: 04
Room Wall
Sign Part P.02
0.8” x 8.5” insert by occupant
All corners of sign
1/8” radius
Typical for all signs
0.1”
0.1”
02
0.8” x 8.5” insert by occupant
Room Wall
Sign Part P.06
7.375” x 3.375”
insert by SFU
Occupant
ROOM #
Faculty/Depart Name 0.8” x 8.5”Insert by Occupant
P.06
5.1”
3.55”
OCCUPANTS NAME
11.15”
12”
7.375” x 3.375”
insert by SFU
Occupant
0.25”
8.5”
OCCUPANTS NAME
0.3”
Room Wall
Sign Part
P.14
All corners of sign
1/8” radius
Typical for all signs
SIGN
PARTS
P.01-16
FAB
FAB
0.15”
8.5” x 11”
insert by SFU
Occupant
3.55”
01
0.2”
0.25”
0.15”
7.375” x 3.375”
insert by SFU
Occupant
All corners of sign
1/8” radius
Typical for all signs
11.1”
12”
P.14
Type 2 Braille
0.25”
3.55”
0.2”
FAB
(SFU LOGO)
1/8” min typ all signs
(65 PT DIN-MED)
8.5”
0.35”
8.5”
8.5”
SFU
INTERIOR
SIGNAGE
1.2”
1/8” min typ all signs
0.5” 0.6”
Room Wall
Sign Part
P.13
04
0.8”
P.12
01
FAB
P.05
Room Wall
Sign Part
P.11
0.4”
P.13
00
FAB
All corners of sign
1/8” radius
Typical for all signs
0.8”
0.6” 0.75” 0.25”
1.6”
OCCUPANTS NAME Insert by Occupant
P.11
All corners of sign
1/8” radius
Typical for all signs
04
0.8” x 8.5” insert occupant
Faculty/Depart Name 0.8” x 8.5”Insert by Occupant
Room Wall
Sign Part P.04
8.4”
FAB
P.04
8.5”
(SFU LOGO)
FAB
All corners of sign
1/8” radius
Typical for all signs
All corners of sign
1/8” radius
Typical for all signs
FAB
OCCUPANTS NAME
0.6” 0.75” 0.45” 0.75”
04
OCCUPANTS NAME 0.8” x 8.5” insert by occupant
Room Wall
Sign Part P.03
2.7”
0.8”
2.7”
All corners of sign
1/8” radius
Typical for all signs
Raven Design Consultants
6955 Hycroft Road,
West Vancouver,
British Columbia.
V7W 2K6
T • 604 921 9400
F • 604 921 6070
E • raven@ravendesign.ca
Type 2 Braille
Type 2 Braille
P.03
8.5”
8.5”
0.8” x 8.5” insert by occupant
FAB
Room Wall
Sign Part P.02
1”
OCCUPANTS NAME
Simon Fraser University
Burnaby Campus.
8888 University Drive,
Burnaby
British Columbia.
V5A 1S6
ROOM #
4.35”
Room Wall
Sign Part P.02
1.2”
(SFU LOGO)
1/8” min typ all signs
0.8”
P.02
02
(SFU LOGO)
0.5” 0.75”
All corners of sign
1/8” radius
Typical for all signs
FAB
1”
ROOM #
0.35”
P.01
01
0.5” 0.75”
(65 PT DIN-MED)
0.5” 0.6”
0.5” 0.6”
(65 PT DIN-MED)
ROOM NAME
All corners of sign
1/8” radius
Typical for all signs
1.2”
1/8” min typ all signs
1/8” min typ all signs
FAB
8.5”
0.8”
1.2”
0.8”
4.8”
(SFU LOGO)
8.5”
7.4”
1”
1.2”
0.8”
4.35”
(SFU LOGO)
8.5”
6.1”
1”
1.2”
0.8”
4.35”
1”
8.5”
0.8”
8.5”
01
P.10.5
42.5”
Room Wall
Sign Part P.10.5
03
42.5”
N.B. This signage document consists of 24 pages. All pages are to be read as one document. Refer to notes and conditions on page #1 of this document.
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
C7000
Men’s W’rm
Small Wall
Sign WS7.m
C7000
Women’s W’rm
Small Wall
Sign WS6.f
C7000
Women’s W’rm
Large Wall
Sign WS2.f
07
07
Men’s W’rm
Large Wall
Sign WS3.m
07
FAB
FAB
C7000
FAB
5.6” MIN
6” MIN
7.9”
10.7”
Install max 6” to door jamb on latch side of door
7.7”
Install max 6” to door jamb on latch side of door
Install max 6” to door jamb on latch side of door
Install max 6” to door jamb on latch side of door
FAB
07
1/8” min typ all signs
0.4”
Women’s Acc
Large Wall
Sign
07
07
12.4”
All corners of sign
1/8” radius
Typical for all wall signs
Install max 6” to door jamb on latch side of door
7.7”
Install max 6” to door jamb on latch side of door
Men’s Acc’ble
Small Wall
Sign
Men’s W’rm
Large Wall
Sign WS3.m
FAB
FAB
Type 2 braille
7.9”
6” MIN
Women’s Acc
Small Wall
Sign
C7000
Install 54” to FFL typ
0.4”
MEN
Install max 6” to door jamb on latch side of door
8.9”
All corners of sign
1/8” radius
Typical for all wall signs
1/8” min typ all signs
Install max 6” to door jamb on latch side of door
C7000
Type 2 braille
5.6” MIN
0.4”
0.6”
7.9”
0.75
Install 54” to FFL typ
Type 2 braille
MEN
Type 2 braille
10.7”
WOMEN
WOMEN
Install 54” to FFL typ
1/8” min typ all signs
Install 54” to FFL typ
0.9
1/8” min typ all signs
FAB
07
FAB
07
Type 2 braille
Type 2 braille
12.4”
All corners of sign
1/8” radius
Typical for all wall signs
Install max 6” to door jamb on latch side of door
7.9”
6” MIN
5.6” MIN
7.7”
Install max 6” to door jamb on latch side of door
Type 2 braille
1/8” min typ all signs
0.4”
MEN
Type 2 braille
0.4”
7.9”
Type 2 braille
12.4”
All corners of sign
1/8” radius
Typical for all wall signs
All corners of sign
1/8” radius
Typical for all wall signs
8.9”
Install 54” to FFL typ
MEN
1/8” min typ all signs
Install 54” to FFL typ
0.4”
WOMEN
0.6”
Install 54” to FFL typ
0.9
Type 2 braille
0.75
Install 54” to FFL typ
WOMEN
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
1/8” min typ all signs
1/8” min typ all signs
Install 54” to FFL typ
8.9”
All corners of sign
1/8” radius
Typical for all wall signs
10.7”
0.4”
Install max 6” to door jamb on latch side of door
MEN
0.4”
MEN
1/8” min typ all signs
7.9”
Install max 6” to door jamb on latch side of door
0.4”
Type 2 braille
Install 54” to FFL typ
Type 2 braille
0.75
Install 54” to FFL typ
WOMEN
WOMEN
1/8” min typ all signs
0.6”
1/8” min typ all signs
Install 54” to FFL typ
0.9
1/8” min typ all signs
7.9”
5.6” MIN
Install max 6” to door jamb on latch side of door
7.75”
Install max 6” to door jamb on latch side of door
11.25”
Install max 6” to door jamb on latch side of door
Install max 6” to door jamb on latch side of door
C7000
Washroom
Small Wall
Sign WS5.w
C7000
Washroom
Large Wall
Sign WS1.w
FAB
07
FAB
07
1/8” min typ all signs
0.7”
7.9”
11.25”
Type 2 braille
All corners of sign
1/8” radius
Typical for all wall signs
11.25”
Install max 6” to door jamb on latch side of door
7.9”
6” MIN
Install max 6” to door jamb on latch side of door
WASHROOM
7.75”
All corners of sign
1/8” radius
Typical for all wall signs
Type 2 braille
Install 54” to FFL typ
Install max 6” to door jamb on latch side of door
1/8” min typ all signs
Install 54” to FFL typ
0.3”
Type 2 braille
0.6”
Install 54” to FFL typ
Type 2 braille
0.75
Install 54” to FFL typ
Type 2 braille
Type 2 braille
0.4”
0.5
1/8” min typ all signs
WASHROOM
1/8” min typ all signs
5.6” MIN
0.4”
1/8” min typ all signs
Type 2 braille
Type 2 braille
11.25”
1/8” min typ all signs
CHANGE
All corners of sign
1/8” radius
Typical for all wall signs
7.75”
All corners of sign
1/8” radius
Typical for all wall signs
7.9”
6” MIN
Install max 6” to door jamb on latch side of door
First Aid
Small Wall
Sign
1/8” min typ all signs
FAB
07
1/8” min typ all signs
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
Type 2 braille
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
FIRST AID
Type 2 braille
0.6”
0.4”
1/8” min typ all signs
Install 54” to FFL typ
Install 54” to FFL typ
WASHROOM
Install 54” to FFL typ
0.7”
7.9”
0.75
Install 54” to FFL typ
Type 2 braille
0.6”
Install 54” to FFL typ
1/8” min typ all signs
1/8” min typ all signs
7.75”
Install max 6” to door jamb on latch side of door
7.9”
CL
elevator call button back plate
Type 2 braille
0.3”
0.3”
0.4”
Type 2 braille
FAB
07
All corners of sign
1/8” radius
Typical for all signs
All corners of sign
1/8” radius
Typical for all signs
00
Install max 8” to door jamb on latch side of door
F#
Wall Sign
Floor Number
FAB
11
4”
8.5”
IN CASE OF
DISTRESS
PULL CHORD
0.4”
0.3”
0.3”
(To be reviewed and
approved by project
Architect and Code
Consultant prior to
fabrication or
installation)
1/8” min typ all signs
Install 54” to FFL typ
Install directly
above elevator
call button - typ
07
Wall Sign
Accessible
Washroom
Distress
Button
Instructions
Install 54” to FFL typ
FAB
0.4”
(To be reviewed and
approved by project
Architect and Code
Consultant prior to
fabrication or
installation)
IN CASE OF FIRE
USE EXIT STAIRS
DO NOT USE
ELEVATORS
0.4”
Wall Sign
In Case Of
Fire ICOF
0.3”
ICOF
8.5”
1/8” min typ all signs
assist
4.35”
8.5”
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
All corners of sign
1/8” radius
Typical for all door signs
All corners of sign
1/8” radius
Typical for all door signs
All corners of sign
1/8” radius
Typical for all door signs
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
11.25””
All corners of sign
1/8” radius
Typical for all door signs
1/8” min typ all signs
11.25””
11.25””
All corners of sign
1/8” radius
Typical for all door signs
1/8” min typ all signs
11.25””
1/8” typ all signs
1/8” min typ all signs
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
0.6”
0.4”
0.6”
1/8” min typ all signs
(To be reviewed and
approved by project
Architect and Code
Consultant prior to
fabrication or
installation)
1/8” min typ all signs
1/8” min typ all signs
30mm DIN MEDIUM
Tactile typ
0.4”
30mm DIN
MEDIUM
Tactile typ
0.4”
0.4”
5/8” DIN
MEDIUM
Tactile typ
0.4”
1/8” min typ all signs
30mm DIN Tactile typ
60mm DIN MEDIUM
Tactile typ
0.4”
0.4”
0.4”
5/8” DIN
MEDIUM
Tactile typ
LEVEL
5/8” DIN MEDIUM
Tactile typ
0.4”
1/8” min typ all signs
30mm DIN
MEDIUM
Tactile typ
0.4”
0.6”
(To be reviewed and
approved by project
Architect and Code
Consultant prior to
fabrication or
installation)
1” DIN MEDIUM
Tactile typ
(To be reviewed and
approved by project
0.4”
Architect and Code
Consultant prior to
fabrication or
30mm DIN
installation)
MEDIUM
Tactile typ
0.4”
1/8” min typ all signs
1/8” min typ all signs
STAIRCASE 0
0.4”
5/8” DIN MEDIUM
Tactile typ
0.4”
0.4”
1/8” min typ all signs
STAIRCASE 0
0.4”
5/8” DIN MEDIUM
Tactile typ
0.4”
5/8” DIN
MEDIUM
Tactile typ
0.4”
(To be reviewed and
approved by project
Architect and Code
Consultant prior to
fabrication or
installation)
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
All corners of sign
1/4” radius
Typical for all projecting signs
90”
90”
90”
90”
90”
90”
1/8” min typ all signs
All corners of sign
1/4” radius
Typical for all projecting signs
All corners of sign
1/4” radius
Typical for all projecting signs
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
90”
90”
90”
March 21 2014 • DRAFT ISSUE
11.25””
All corners of sign
1/4” radius
Typical for all signs
11.25””
90”
90”
11.25””
90”
All corners of sign
1/4” radius
Typical for all signs
90”
90”
90”
11.25””
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
90”
90”
90”
March 21 2014 • DRAFT ISSUE
All corners of sign
1/4” radius
Typical for all signs
All corners of sign
1/4” radius
Typical for all signs
All corners of sign
1/4” radius
Typical for all signs
All corners of sign
1/4” radius
Typical for all signs
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
5”
5”
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
60” max
60” max
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE
(To be reviewed and approved by project Architect and Code Consultant prior to installation)
(To be reviewed and approved by project Architect and Code Consultant prior to installation)
5”
5”
NOTICE TO USER
• This drawing and it’s contents have been
produced for the sole purpose of illustrating
preliminary design concepts only.
• This drawing and it’s contents have not been
produced for, and should not be used for
fabrication and /or construction purposes.
• The contents of this drawing are approximate
and not to scale.
• Anyone one using and/or relying on any
information shown on this drawing is to ensure
prior to placing any work in hand, that all such
information is reviewed and approved by all
authorities having jurisdiction plus a professional
Architect, Code Consultant and Structural
Engineer each registered in the Province of British
Columbia.
• All contractors, fabricators and/or suppliers
using and/or relying on any information shown
on this drawing are to produce original digital full
size shop drawings in full colour along with
setting out all work on site for review and
approval by SFU plus a professional Architect,
Code Consultant and Structural Engineer each
registered in the Province of British Columbia
prior to placing orders with suppliers and/or
placing any work in hand.
March 21 2014 • DRAFT ISSUE