Version V1.1
Filing Date 2011-08-25
CHD-CE200 Single Open Electric Plug locks User Manual
5．Atmospheric pressure: 70～106Kpa.
2.2
1 Summarize
CHD-CE200 Electric Plug lock has signal feedback, monitor the status of
the door with long distance, low noise, low temperature and automatic open
lock when power off features. The electric plug lock is made of lock body,
induced magnet base, installing accessories for controlling etc. Lock body is
Check out when open the packing
Open the lock packing, check the appearance, if something damaged please
contact with the delivery agency.
Check with the packing list, if the lock and the accessories are completed and
correct.
power on DC power, the magnetic reed pipe inside the lock body detect the
2.3
magnetic field to make the body locked, it will open lock automatically open
Installing the accessories and installation method is as the following picture.
after power off. It is widely used in Intelligent Buildings, Intelligent
Mechanic installation
Installation map for wooden door
Communities, Bank etc.
1.1 Products Introductions
1.1.1 Appearance and Dimension
Dimension: ±5%
Induced magnet base dimension:
Unit
Length
Width
Height
Dimension(mm)
90
24
2
Item
Length
Width
Height
Dimension(mm)
200
34
42
Under rimless glass door with doors clip
Dimension of Lock Body:
1.2
Technologies Descriptions
Rated Working Voltage: 12V DC;
Input voltage range: 10.8VDC-13.2VDC;
Rimless glass door with gate clip
Starting current: 0.9A～0.4A;
Working current: 0.3A～0.1A;
Service time: more than 100 thousands times;
Opening mehod: 180 degree;
Rated power: ≤13W;
Time relay functions: 0 seconds, 3 seconds, 6 seconds, 9 seconds;
Using electric control to open;
Door switch: Come with door switch output feedback, provide endpoit signal
bythe switch, always open or close power on method;
continunous power supply;
Working status: power off open lock
2
2.1
Installation
Environment required
1. No conductive dust, no corroding metal and insulation breakdown gas;
2. Not used in the area that have water and fog.
3．Working environment: -10～50℃, 20～90％(non condesing, frozen);
4．Storage environment: -20～60℃, 20～90％(non condesion, frozen);
Installation reminds:
1. The lock is used inside room, can not use and install outside;
2. Lock body and induced magnet base should use screws to install, do not
use welding or some other ways to istall;
3. Remind the spring bolt must be aiming at the hole of spring bolt;
4. Install the above and bottom door clips, door gap range should be 5-10MM.
2.4
Connection defines
Connect with access controller through the external standard RJ45
conversions terminal, and then can drive opening lock.
Version V1.1
Filing Date 2011-08-25
Sheet 1（Electric plug lock outgoing line defines）
Red wire
White, blue, yellow
Black wire
Anode
Cathode
+12V
GND
Gra, orange, gree
three lines
three lines
Lock Status signal
Door status signal
output
output
White N.O
Gray N.O
Blue COM
Orange COM
Yellow N.C
Green N.C
Sheet 2（RJ45 mother socket signal defines）
No.
Code
Related wire
1
1．＋
Orange gray
2
2．－
Orange
3
1．＋
Green white
4
2．－
Blue
5
1．＋
Blue white
6
2．－
green
Remark: RS45
7
3．NO
Door switch brown white
mother
GND-brown
outgoing line is
8
4．C
port
red, black, gray,
white. Inside cascade lock status and door status surveillance, makes any
action has output door open signal.
3 Maintenance
1．If need to clean, please power off and use soft cloth to wipe;
2. Unprofessional people is not available to open in case damage the parts.
Appendix toxic and harmful substance or element characteristic chart
toxic and harmful substance or element characteristic
Name
Pb
Hg
Cd
Cr6+
PBB
PBDE
×
○
○
○
○
○
Component
O it shows the content of toxic and harmful substance is under SJ/T-11363－2006
rule, X it shows
the content of
toxic and harmful substance is over SJ/T-11363－
2006 rule,
Emerson is always commiting himself to design and manufacture friendly-environment
products, we are trying lastingly ongoing study to reduce and eliminating toxic and
harmful substance of products, the following components which contain toxic and
harmful is because we couldnot
slove subject to the current technical limit.
About the environmental protection use period introduction：This product environmental
protection use period（Already identified in product ontology），It is to point to in the
normal conditions of use and abide by the product safety precautions，from within the
product contains the poisonous and harmful substances or elements of environment
won't caused serious influence deadline personal and property .
Applicable scope: CHD-CE200 single open electric plug clock
Emerson Network Power Co. , Ltd
Address： KeFa Road1, technology industry park, Nan Shan District, Shenzhen.
Post code：518057
Website：www.emersonnetworkpower.com.cn
CustomerServiceHotline：4008876510 E-mail：service@emersonnetwork.com.cn
Material version：V1.1
filing time：2010-11-30
All rights reserved, reserves all rights. Content is subject to change without prior notice.