Note:
The system architecture is as below.
There are no direct cables to connect the RDU-MI/MII and the NVR / IP Camera.
1. NVR Hard Disc Installation and IP configuration in IP Camera:
1) Refer to “->NVR Hard Disc Installation” from page:
2) Network Setting for IP Camera: default IP address: 192.0.0.64; User Name: admin;
Pass Word：12345. And to visit the IP address via IP.
Go to “Basic configuration->network” to set the IP address
2. IP Camera connected to NVR
Default IP address of NVR: 192.0.0.64; User Name: admin; Pass Word: 12345.
For the first time of login, system requests to download and install the JAVA control
Input the IP address of the NVR and initialize the hard disc of NVR:
After formatting the hard disc, then add the IP camera
Click “Add” (input the IP address and type information by manual） or “Quick Add”（search
and add the IP Camera by auto）
a. Click “Add”:
Input the IP address, protocol: HIKVISION and other parameters.
User Name: admin; Password(default)：12345. Then click “ok”.
b. Click “Quick Add”：
System will search and find the IP camera in the network segment. Select and click “OK”.
After adding the IP camera successfully, the system will display the below:
“Status” is “Online”
3. NVR connected to RDU-M
To enable the video function firstly.
Please note: only RDU-MI and RDU-MII provide this function: RDU-MP does not
provide this function.
Go to “system manage->system config->application config->video Enable Setting->start”
“Site/Device Manage->Select Area”, as below display, IP Camera (10.136.236.72) is
installed in the RDU-A named “Solution”.
Select “Solution”, then click “Search for device automatically”.
Please note: Select “Camera”, then click “Query”.
Select the right IP Camera.
Remark：
“Device is added”: the camera is added in other site configuration.
“Device will be added”: the camera is available for adding.
“Device is deleted by bottom monitor”: the device was deleted from the system by RDU-A,
but it is still displayed in the RDU-M (for the devices other than NVR and IP camera) with
this status description. For instance, one DME is connected and managed by one RDU-A.
Once this DME is deleted by this RDU-A, the upper RDU-M will display this status when
the query for this DME is done in this RDU-M.
Device is useless: Error in communication
After adding the NVR, the video can be displayed by double click the icon of the IP
camera.
Or login the site to display the video.
For instance: go to “Solution” and click the “icon” of the IP Camera.
4. Other configuration:
The configuration via “video surveillance->video config” is the same as the configuration in
the menu of “configuration” in NVR.
“video surveillance->history play” can support display the history video
1. NVR hard disc installation:
Tool: cross screw driver
For NVR 51070012 / 51070013
1、Remove the back cover panel.
2、Use screw to fix the hard disc
on the bracket. To fix the hard
disc on the bottom bracket, the
top bracket must be removed
firstly.
3、Connect one end of the data
cable of the hard disc to the main
board.
4、Connect the other end of the
data cable to the hard disc.
5、Connect the power cable to the
hard disc.
6、Fix the back cover panel.
For NVR 51070011 / 51070014
1、Remove the back cover panel.
2、Connect one end of the data cable to the hard disc and the other end
to the hard disc.
3、connect one end of the power cable to the main board and the other
end to the hard disc.
4、Fix the hard disc by screw and the back cover panel
2. Modify the name of channels
Channel names are listed in the below:
Select and click the channel name, the video can display.
Modify the name of the channel, please go to“configuration->camera settings->display
settings”