Edition 2009 ERHAVIT® HB – Universal liming agent providing good cutting yield Features ERHAVIT® HB is an amine based, sulphide-free liming agent in liquid form. Handling & storage: Wear goggles and gloves during handling and close the container firmly after use. ALWAYS STIR BEFORE USE. Can be stored for about 1 year (from date of production) if kept between 10°C and 25°C. In any case, protect from cold below -10°C and from heat above 30°C. If exposed to the cold, bring in to a warm place and stir before use. Benefits ERHAVIT® HB increases area and cutting yields. Suitable for: ERHAVIT® HB improves opening-up of the hide structure and is very effective in reducing swelling and wrinkling during the liming process. ERHAVIT® HB accelerates the diffusion of liming chemicals. ERHAVIT® HB imparts a very good grain-cleaning effect and improves the quality of hides & skins. ERHAVIT® HB is specially designed for the hair-pulping process but it can also be used in hair-save processes. Application Soaking is ideally done with PELLVIT® IS-A supported by PELLVIT® C to achieve the best cutting yields. This may be followed by a hair-pulping or hair-saving process including 0.8 – 1.5 % ERHAVIT® HB (based on salted or fresh hide weight). The quantity of ERHAVIT® HB to be used largely depends on the required sodium sulphide or sodium sulphydrate reduction in the lime. Larger quantities result in a higher yield in area and in improved pelt quality. 1 Our application recommendations are in line with our present state of knowledge. They do not, however, exempt the customer from performing his own tests to determine the suitability of the supplied products for their intended purposes. Application of the products lies outside the scope of our control and therefore comes within the customer’s sphere of responsibility. We guarantee the satisfactory quality of our products subject to general terms of sale and delivery. Product INformation continued Edition 2009 ERHAVIT® HB - Product characteristics Trade form at 20°C clear to slightly turbid liquid Appearance at 20°C brownish liquid Solid content (%) approx. 23 pH-value (10%) approx. 10 This information is for guidance only. A Product Specification is available on request. 2 Regarding toxicological and ecological data see the safety data sheet of above product. ® ® ERHAVIT and PELLVIT are registered or filed trademarks owned by or licensed to TFL in most countries. Above data are based on the current state of knowledge. However, buyer is not released from his obligation to examine the material on receipt. Seller makes no warranty of merchantability or fitness for practical use or application.