Page 1 of 2 Measurement & Control News In this issue: ♦ Process Control with a BarGraph Meter ♦ USB Interface ♦ Current Transformer Polarity Check - Video Bargraph for Control The combination of proportional (analog) output and on/off relays on Weschler Bargraph meters provide a flexible way to control a process or test. The meter in this example regulates the feed motor speed and turns off the blade motor when overloaded. The tricolor bar changes from green to amber to red as the blade load increases. See Bargraph Products Download Bargraph Catalog USB Interface USB is becoming a popular interface for measurement & control equipment. It allows a computer to easily communicate with a meter, controller, smart sensor, recorder or tester. USB is limited to one device per port and relatively short distances, but it is handy for instrument setup and download of stored data. See USB Products Measurement & Control News | Weschler Instruments | June 2014 Page 2 of 2 CT Polarity Check Analog panel meters are easy to set up and simple to operate. This makes them useful for quick tests - such as the current transformer (CT) polarity check described in this YouTube video posted by one of our customers. Check CT polarity with center zero DC ammeter & battery WESCHLER INSTRUMENTS weschler.com info@weschler.com 800-903-9870 440-238-2550 16900 Foltz Parkway Cleveland, OH 44149 440.238.2550 Specializing in: Analog Panel Meters Digital Panel Meters Switchboard Meters Bargraph Meters Ruggedized Meters Meter Relays Power & Energy Monitors Counters / Timers Controllers 800.557.0064 Fax: 440.238.0660 sales@weschler.com Transducers Current Transformers Sensors Signal Conditioners Transmitters Isolators Recorders Data Loggers Process Calibrators Test Equipment 6/30/2014