Memtrex* HFE Halar PTFE Lenntech All Fluoropolymer Pleated Cartridge

advertisement
Lenntech
info@lenntech.com Tel. +31-152-610-900
www.lenntech.com Fax. +31-152-616-289
Memtrex* HFE - Halar PTFE
All Fluoropolymer Pleated Cartridge
Features and Benefits
The MHFE filter is just one example of our strong
commitment to fluid treatment. Our complete
portfolio includes filters for every stage of processing, and we offer custom solutions for your unique
applications. GE Water & Process Technologies is
your complete source for filters, crossflow membranes, housings, and other filtration equipment.
Typical Applications
MHFE all fluoropolymer filters offer outstanding
performance in extremely harsh chemical environments. MHFE filters are manufactured and
packaged in a cleanroom environment for assured cleanliness. Typical applications include:
Figure 1 : Memtrex HFE filter
Memtrex* HFE are made entirely from fluoropolymer materials including Halar (ECTFE). Halar is a
trademark of Ausimont.), and PTFE. Halar is an industrial-grade fluoropolymer with excellent solvent resistance. MHFE benefits of the edge
lamination technology assuring a lower pressure
drop and increasing flow rate. MHFE filters can
withstand the harshest process conditions due to
its construction using these highly resistant materials. Providing broad chemical compatibility, you
can count on our filters to produce consistent, uniform process streams in your most demanding
filtration applications. MHFE deliver high flow rates
and high purity results with absolute rated efficiencies (99.9% filtration efficiency at rated pore
size based on ASTM F795 and F661 test methods)
and retention characteristics that outperform
other filters.
•
Chemicals
•
Microelectronics
•
Pharmaceuticals
General Properties
Memtrex HFE filters are available the following
absolute pore size micron ratings: 0.05, 0.1, 0.2,
0.45 and 1 µm. Tables 1, 2, 3 and 4 show further
details on materials of construction, dimensions,
operational limits and flow performance in water.
Table 1: Materials of Construction
Core and cage
Halar (ECTFE)
Support layer
Halar (ECTFE)
Membrane
ePTFE
End caps
Halar (ECTFE)
Find a contact near you by visiting www.ge.com/water
Table 2: Dimensions
Filter
model
Nominal O.D.
Nominal I.D.
MHFE85
MHFE91
MHFE92
MHFE94
MHFE01
2.75” (70mm)
2.75” (70mm)
2.75” (70mm)
2.75” (70mm)
2.75” (70mm)
1.25” (31mm)
1.25” (31mm)
1.25” (31mm)
1.25” (31mm)
1.25” (31mm)
Integrity Testing
•
0.05 µm
≤ 5 cc / min at 40 psig (2.76 bar)
•
0.1 µm
≤ 5 cc / min at 40 psig (2.76 bar)
•
0.2 µm
≤ 5 cc / min at 30 psig (2.07 bar)
•
0.45 µm
≤ 5 cc / min at 20 psig (1.38 bar)
•
1 µm
≤ 5 cc / min at 15 psig (1.38 bar)
Table 3: Operational Limits
Maximum forward differential pressure
60 psi (4.14 bar) at 70°F (21.1°C)
Maximum reverse differential pressure
30 psi (2.07 bar) at 70°F (21.1 C)
Maximum operating temperature
205ºF (96.1ºC) at 25 psid (1.7 bar)
Table 4: Flow Performance in CleanWater1
1
Additional Information
•
Memtrex HFE filters may be sanitized with
compatible chemical agents. The filters must
not be autoclaved or steam sterilized.
•
GE certifies that the material contained in its
Memtrex HFE pleated filters meet U.S. FDA
requirements for food contact under the applicable regulations in 21 CFR. For further information, contact GE technical services.
Memtrex HFE filters meet the test criteria for
USP class VI-121°C Plastics.
•
Aqueous extracts from Memtrex HFE filters
contain less that 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues.
•
GE filter cartridges are designed and manufactured for resistance to a wide range of
chemical solutions. Conditions will vary with
each application and users should carefully
verify chemical compatibility. Please contact
your GE distributor for more information.
Data based on 10” length filter
Table 5 provides additional ordering information. Table 5: Ordering Information
Type
Absolute Micron
Rating
Nominal cartridge
Length
End #1 Adapter
End #2 Adapter
Elastomer material
Product Grade
MHFE
85 = 0.05 µm
91 = 0.1 µm
92 = 0.2 µm
94 = 0.45 µm
1 = 10 in (25 cm)
2 = 20 in (51 cm)
3 = 30 in (76 cm)
4 = 40 in (102 cm)
A = Open End Gasket
E = 222 O-Ring
F = 226 O-Ring
A = Open End Gasket
E = Closed End Cap
H = Fin Adapter
T = Teflon² Encapsulated Viton²
E = Electronic grade
rinse
Pre Wet = Rinsed and
packed wet
²Teflon and Viton are a registered trademark of DuPont.
Lenntech
Page 2
info@lenntech.com Tel. +31-152-610-900
www.lenntech.com Fax. +31-152-616-289
Fact Sheet
The below GE ‐series cartridge filters are all the models that are potentially possible in all variations.
Please note that not all models are actually produced or on stock and some model numbers and names hav
Nevertheless this should help as cross reference table chart for Cuno filters nomenclature.
Memtrex MHFE MHFE851AAT
MHFE851AET
MHFE851AHT
MHFE851EAT
MHFE851EET
MHFE851EHT
MHFE851FAT
MHFE851FET
MHFE851FHT
MHFE911AAT
MHFE911AET
MHFE911AHT
MHFE911EAT
MHFE911EET
MHFE911EHT
MHFE911FAT
MHFE911FET
MHFE911FHT
MHFE921AAT
MHFE921AET
MHFE921AHT
MHFE921EAT
MHFE921EET
MHFE921EHT
MHFE921FAT
MHFE921FET
MHFE921FHT
MHFE941AAT
MHFE941AET
MHFE941AHT
MHFE941EAT
MHFE941EET
MHFE941EHT
MHFE941FAT
MHFE941FET
MHFE941FHT
MHFE852AAT
MHFE852AET
MHFE852AHT
MHFE852EAT
MHFE852EET
MHFE852EHT
MHFE852FAT
MHFE852FET
MHFE852FHT
MHFE912AAT
MHFE912AET
MHFE912AHT
MHFE912EAT
MHFE912EET
MHFE912EHT
MHFE912FAT
MHFE912FET
MHFE912FHT
MHFE922AAT
MHFE922AET
MHFE922AHT
MHFE922EAT
MHFE922EET
MHFE922EHT
MHFE922FAT
MHFE922FET
MHFE922FHT
MHFE942AAT
MHFE942AET
MHFE942AHT
MHFE942EAT
MHFE942EET
MHFE942EHT
MHFE942FAT
MHFE942FET
MHFE942FHT
Lenntech B.V.
T +31‐15‐261.09.00
F +31‐15‐261.62.89
info@lenntech.com
www.lenntech.com
MHFE853AAT
MHFE853AET
MHFE853AHT
MHFE853EAT
MHFE853EET
MHFE853EHT
MHFE853FAT
MHFE853FET
MHFE853FHT
MHFE913AAT
MHFE913AET
MHFE913AHT
MHFE913EAT
MHFE913EET
MHFE913EHT
MHFE913FAT
MHFE913FET
MHFE913FHT
MHFE923AAT
MHFE923AET
MHFE923AHT
MHFE923EAT
MHFE923EET
MHFE923EHT
MHFE923FAT
MHFE923FET
MHFE923FHT
MHFE943AAT
MHFE943AET
MHFE943AHT
MHFE943EAT
MHFE943EET
MHFE943EHT
MHFE943FAT
MHFE943FET
MHFE943FHT
MHFE854AAT
MHFE854AET
MHFE854AHT
MHFE854EAT
MHFE854EET
MHFE854EHT
MHFE854FAT
MHFE854FET
MHFE854FHT
MHFE914AAT
MHFE914AET
MHFE914AHT
MHFE914EAT
MHFE914EET
MHFE914EHT
MHFE914FAT
MHFE914FET
MHFE914FHT
MHFE924AAT
MHFE924AET
MHFE924AHT
MHFE924EAT
MHFE924EET
MHFE924EHT
MHFE924FAT
MHFE924FET
MHFE924FHT
MHFE944AAT
MHFE944AET
MHFE944AHT
MHFE944EAT
MHFE944EET
MHFE944EHT
MHFE944FAT
MHFE944FET
MHFE944FHT
Rotterdamseweg 402 2629HH Delft
Netherlands
Download