Resinex CAT-50 ™ Strong base anion exchange resin for catalysis Resinex™ CAT-50 is a high purity, premium grade, strongly basic gel-type anion exchange resin type 1, specially designed for chemical processing - removal of mercaptan sulphur from hydrocarbon streams - and catalysis (organic reactions of polar molecules). The selected bead distribution of Resinex™ CAT-50 - very close to monodisperse - results a low pressure drop and an optimal packed bed. Key Features and Benefits Typical Properties Type Crosslinked polystyrene divinylbenzene Form gel-type, white, spherical beads Functional group Quarternary Ammonium, Type 1 Whole bead count Ionic form, as shipped Bead size 95% min. Cl(≥ 90%) 0.50 - 0.71 mm Uniformity coefficient 1.20 max. Bulk density, as shipped 670 kg/m3 Real density Water retention Total capacity (Cl- form) Volume change Cl- –> OH- Stability, temperature Stability, pH Service flow rate Backwash expansion • Resistance To Osmotic Shock Extended lifetime and very low number of broken beads • Uniform Bead Size Lower pressure drop 1.06 g/cm3 50 - 56% 1.30 eq/l min. 30% max. 40°C (OH- Form) max. 0 - 14 Typical Applications • Removal of Mercaptan sulphur in chemical processing • Catalysis: Organic reactions of small polar molecules Standard Design Conditions Bed depth • High Integrity Beads Excellent resistance to mechanical degradation ensures low pressure drop > 750 mm 8 - 55 BV/h 50 - 75% Standard Packaging • 25 lit. PE valve bag • 1000 litre big bag Resinex CAT-50 ™ Strong base anion exchange resin for catalysis Pressure Drop °C 60 40 0.6 40 0.4 20 0.2 0 0 20 40 60 80 100 0 Flow Rate, m/h 60 F) 80 8° 0.8 ) °F 4 (10 (6 6 (8 100 F) 6° °C °C 30 1.0 ) °F 20 (50 (40 °C °C 20 10 5°C 80 F) 8° (6 120 Pressure Drop, bar/m Pressure Drop, kPa/m °F) °F ) 100 1.2 Backwash Expansion, % 120 5 °C (40° F) 10 °C (50 °F) Backwash Expansion C 0° (8 3 40 20 0 0 4 8 12 16 20 Flow Rate, m/h Product Packing 25 lit. polyethylene valve bag 48 bags per pallet Polypropylene FIBCs (big bag), 1.000 lit. NOTICE Jacobi Carbons reserves the right to change product specifications without prior notification. The information contained in this datasheet is intended to assist a customer in the evaluation and selection of products supplied by Jacobi Carbons. The customer is responsible for determining whether products and the information contained in this document are appropriate for the customers use. Jacobi Carbons assumes no obligation or liability for the usage of the information in this datasheet, no guarantees or warranties, expressed or implied, are provided. Jacobi Carbons disclaims responsibility and the user must accept full responsibility for performance of systems based on this data. CAUTION Strong oxidizing agents such as nitric acid can react violently with ion exchange resins and cause explosive type reactions. Before using strong oxidants, consult sources knowledgeable in the handling of these materials. abcdef Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 WORLDWIDE DISTRIBUTORS A diverse network of agents, strategically located around the world Resinex and Jacobi are trademarks of Jacobi Carbons. © Jacobi Carbons AB, 2010 RX-CAT50-eng-Rev11-20101019