Resinex NTR Inert resin ™

advertisement
Resinex NTR
™
Inert resin
Resinex™ NTR iis a spherical inert resin, made of Poly-methyl-methacrylat, especially designed for the use in trio-bed
systems. The density of the polymer, combined with the special bead size distribution ensures a perfect separation of anion
and cation resins, e.g. Trio-bed systems in water preparation or in mixed-bed applications during the regeneration step.
Typical Properties
Type
Form
Functional group
Bead size (Diameter)
Bulk density
Specific gravity
Stability, temperature
Stability, pH
Storability
Key Features and Benefits
Poly-methyl-methacrylat
white to light yellow beads
none
0.60 - 0.90 mm
• Special Bead Size Distribution
Perfect separation of cation and anion resin
• Selected Specific Gravity
Separation layer between cation and anion
resin
700 kg/m3
1.15 g/cm3
max. 100°C
0-14
min. 3 years
Typical Applications
• Water Treatment Systems
Trio-bed systems
Standard Packaging
Standard Design Conditions
Bed depth
>750 mm
• 25 lit. PE valve bag
Service flow rate
8-40 BV/h
• 1000 litre big bag
Resinex NTR
™
Inert resin
Product Packing
25 lit. polyethylene valve bag
48 bags per pallet
Polypropylene FIBCs
(big bag), 1.000 lit.
NOTICE Jacobi Carbons reserves the right to change product specifications without prior notification. The information contained in this datasheet is intended to assist a customer in the evaluation and selection of products supplied by Jacobi Carbons. The customer
is responsible for determining whether products and the information contained in this document are appropriate for the customers use. Jacobi Carbons assumes no obligation or liability for the usage of the information in this datasheet, no guarantees or warranties,
expressed or implied, are provided. Jacobi Carbons disclaims responsibility and the user must accept full responsibility for performance of systems based on this data.
CAUTION Strong oxidizing agents such as nitric acid can react violently with ion exchange resins and cause explosive type reactions. Before using strong oxidants, consult sources knowledgeable in the handling of these materials.
abcdef
Lenntech
info@lenntech.com Tel. +31-152-610-900
www.lenntech.com Fax. +31-152-616-289
WORLDWIDE DISTRIBUTORS A diverse network of agents, strategically located around the world
Resinex and Jacobi are trademarks of Jacobi Carbons. © Jacobi Carbons AB, 2010
RX-NTR-eng-rev10-20100505
Download