NC Alpha INSIGHT ® Overview The NC Alpha provides the low-clog performance of a field erected splash-fill tower with the convenience and value of the factory assembled NC cooling tower. Primary Benefits • • • • nhanced Low-Clog Performance — for dirty E water applications Faster Turnaround — up to 50% lead time reduction and quick quotes helps to fit outage schedules Lower Installation Costs — up to 80% cost reduction Low Maintenance Costs — typical of an NC FILM FILL Low-Clog Performance: • Splash fill allows for better low-clog performance minimizing fill replacement frequency, downtime costs and other expenses relative to film fill • Heavy 235 galvanized or stainless steel structures are stronger, lighter and more fire resistant compared to pressure-treated wood towers Faster Turnaround: • Shorter quoting time than field erected towers • Significantly reduced lead times compared to field erected towers • Improved ability to fit installation into an outage schedule reducing downtime costs Lower Installation Cost: • Easy-fit maintenance options for quick installation • Total installation time reduced by 80% • Factory assembly provides one shipment with minimal lay down area requirements • Integral collection basin eliminates the cost for a concrete basin more THERMAL PERFORMANCE Benefit Detail 100% SPLASH FILL 60% GOOD BEST CLOG RESISTANCE NC Alpha field erected Quoting 1-2 hours 5-7 days Lead Time 8 weeks* 16 weeks NC Alpha field erected 2-3 days 2-3 weeks 1 6+ 1 x Tower 3 x Tower *starting July 1, 2010 Installation Time Shipments Lay Down Area NC Alpha INSIGHT Benefit Detail Low Maintenance: • Gear drive standard — 5 year no-hassle operation • Optional stainless steel cold water basin completely factory welded and leak free • A full line of Marley controls and VFD options are available for superior energy management and complete tower energy control • Rigorous structural review to minimize tower vibration, even with use of a VFD • Assembled with as much as 71% recycled content No-Hassle System 5 Geareducer® Annual Maintenance $624 $2,380 5 Year Maintenance $4,270 $11,900 example savings Common Applications Features • • • • • • • • • articulate carry over — often found in steel P mills and cement plants Pulp carry over — typical in the paper industry and food processing where vacuum pumps or barometric condensers are used Ethylene glycol content Geothermal applications Salt water applications Petrochemical applications Phosphoric acid applications Fluorine applications GPM Range 290 to 2700 GPM per cell • • • • • • • • • • belt drive $7,630 ighest thermal performance low-clog H PVC splash fill offered by Marley Crossflow design, vertical air discharge Non-corrosive stainless or galvanized steel structure Induced draft — single fan per cell Factory assembled — easy installation Low sound fan, standard Marley System 5 Geareducer Optional welded stainless steel water collection basin VFD — allows maximum efficiency Belt drive available on all models up to 60hp Marley coupling specifically designed for variable torque VFD applications 7401 WEST 129 STREET | OVERLAND PARK, KANSAS 66213 UNITED STATES | 913 664 7400 | spxcooling@spx.com | spxcooling.com Contact your Marley Sales Representative at spxcooling.com/en/sales/ In the interest of technological progress, all products are subject to design and/or material change without notice. ©2011 SPX Cooling Technologies, Inc. | Printed in USA IN-NCA-10