PROJECT SHOPPING LIST D e s c r i p t i o n METROPOLITAN TM RAIL SECTIONS - 4 ft. Section MR450 CR425 - 6 ft. Section MR650 CR625 CONNECTORS - To mount Rails NEWEL POSTS 1 per rail plus 1 MP125 FLOOR FLANGES - To mount LAG SCREWS LS100 - To secure flanges to wood surface - 1 pkq. per flange MASONRY ANCHORS MA100 - To secure flanges to concrete surface - 1 pkq. per flange STUB SUPPORT ST100 - To add support to rails - 1 per rail LAMBS TONGUES LT200 - For decorative touch to posts at ends of run - Compliments all Rail Styles (Not for Structural Support) COLUMN SOCKET - Used for Column installation - 2 per package NP125 FF125 post to surface - 1 per post COLUMNS: Flat & Corner QUANTITY ND125 to post - 1 Pkg. per rail section PR ICE CLASSIC ® 1 1/4" 1 1/4" FLAT: 3S100 CORNER: 3S200 V500 TOOLS & SUPPLIES - Flat head screwdriver - Hammer - Socket or Adjustable Wrench - Hack Saw (if rails need to be cut or pitched) - Power drill & bits - Touch up paint. PAINTING & MAINTENANCE Due to the nature of steel, exposed, scratched or scraped areas will rust. Touch up all scraped or scratched areas immediately after installation. Annual repainting is recommended. WARNING Village Ironsmtih products must be installed in compliance with local building coeds and/or specifications. These products are for decorative use only. DO NOT use Railings for above grade structures such as balconies, decks, porches, etc. Railings are NOT designed to support body weight or prevent a person from falling. © 2007 LL Building Products Inc.