S 1. Id dentification n

advertisement
SAFETY
S
DATA S
SHEET
1. Id
dentification
n
Produ
uct identifier
UNITED CO
OATINGS ELA
ASTUFF 120 RO
OLLER GRAD
DE COATING P
PART B
Othe
er means of identification
P
Product Code
Reco
ommended use
e
Polyurethane
e elastomer co
oating.
Manu
ufacturer/Impo
orter/Supplier//Distributor information
Manu
ufacturer
Co
ompany name
GAF
1 Campus Drive
D
Parsippany, NJ 07054 USA
A
Te
elephone
Em
mergency pho
one number
3411
1-800–766–3
CHEMTREC
C [DAY OR NIG
GHT] 1-800-42
24-9300
Within USA and
a CANADA
1-800-42
24-9300
Outside USA
A and Canada:
1 703-74
41-5970
2. Hazard(s) ide
entification
Physical hazards
d.
Not classified
Healtth hazards
Acute toxicity
y, oral
Categorry 4
Acute toxicity
y, dermal
Categorry 4
Serious eye damage/eye irrritation
Categorry 1
city
Carcinogenic
Categorry 2
Hazardous to
o the aquatic environment,
e
accute
hazard
Categorry 3
o the aquatic environment,
e
Hazardous to
long-term ha
azard
Categorry 3
Envirronmental haz
zards
A defined hazards
OSHA
Not classified
d.
Label elements
S
Signal word
Danger
H
Hazard statement
Harmful if sw
wallowed. Harm
mful in contact w
with skin. Causses serious eye
e damage. Susspected of
causing canc
cer. Harmful to aquatic life. Ha
armful to aquattic life with long
g lasting effectss.
P
Precautionary statement
Prevention
n
Response
If swallowed: Call a poison center/doctor if you feel unw
well. If on skin: W
Wash with plen
nty of water. If
se cautiously with
w water for se
everal minutess. Remove conttact lenses, if p
present and
in eyes: Rins
easy to do. Continue
C
rinsing. Immediatelyy call a poison center/doctor. Rinse mouth. T
Take off
contaminated clothing and wash before re
euse.
Storage
Store locked
d up.
Disposal
Dispose of contents/contain
ner in accordan
nce with local/rregional/nationa
al/international regulations.
Hazard(s) not otherwise
sified (HNOC)
class
Obtain speciial instructions before use. Do
o not handle un
ntil all safety pre
ecautions have
e been read
and understo
ood. Wash thorroughly after ha
andling. Do no
ot eat, drink or ssmoke when using this
product. Avo
oid release to th
he environmen
nt. Wear protecctive gloves/pro
otective clothing
g/eye
protection/fa
ace protection.
None known
n.
Material name: UNITE
ED COATINGS ELASTUFF
E
120 ROLLER GRADE PART B
sion date: 11-23-2
2015
Version #: 02 Revis
SDS 3056
SDS US
S
1/8
3. Composition/information on ingredients
Mixtures
Chemical name
Common name and synonyms
CAS number
%
94-96-2
5 to <10
13463-67-7
1 to <5
1318-02-1
1 to <5
68479-98-1
0.1 to <1
2-Ethyl-1,3-hexanediol
Titanium Dioxide
Zeolites
Diethyltoluenediamine
Non-Hazardous Ingredients
80 to <90
4. First-aid measures
Inhalation
Call a physician if symptoms develop or persist.
Skin contact
Wash off with soap and water. Get medical advice/attention if you feel unwell. Get medical
attention if irritation develops and persists. Wash contaminated clothing before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention immediately.
Rinse mouth. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs.
Get medical advice/attention if you feel unwell.
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
vision. Permanent eye damage including blindness could result.
Eye contact
Ingestion
Most important
symptoms/effects, acute and
delayed
Indication of immediate
medical attention and special
treatment needed
Provide general supportive measures and treat symptomatically. Keep victim warm. Keep victim
under observation. Symptoms may be delayed.
General information
IF exposed or concerned: Get medical advice/attention. Ensure that medical personnel are aware
of the material(s) involved, and take precautions to protect themselves. Show this safety data
sheet to the doctor in attendance.
5. Fire-fighting measures
Suitable extinguishing media
Powder. Carbon dioxide (CO2).
Unsuitable extinguishing
media
Do not use water jet as an extinguisher, as this will spread the fire.
Specific hazards arising from
the chemical
During fire, gases hazardous to health may be formed.
Special protective equipment
and precautions for firefighters
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Fire fighting
equipment/instructions
Move containers from fire area if you can do so without risk.
Specific methods
Use standard firefighting procedures and consider the hazards of other involved materials.
General fire hazards
No unusual fire or explosion hazards noted.
6. Accidental release measures
Personal precautions,
protective equipment and
emergency procedures
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear
appropriate protective equipment and clothing during clean-up. Do not touch damaged containers
or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation.
Local authorities should be advised if significant spillages cannot be contained. For personal
protection, see section 8 of the SDS.
Material name: UNITED COATINGS ELASTUFF 120 ROLLER GRADE PART B
Version #: 02 Revision date: 11-23-2015
SDS 3056
SDS US
2/8
Methods and materials for
containment and cleaning up
Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is
possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth
and place into containers. Prevent product from entering drains. Following product recovery, flush
area with water.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to
remove residual contamination.
Environmental precautions
Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Avoid
discharge into drains, water courses or onto the ground. Inform appropriate managerial or
supervisory personnel of all environmental releases.
7. Handling and storage
Precautions for safe handling
Conditions for safe storage,
including any incompatibilities
Obtain special instructions before use. Do not handle until all safety precautions have been read
and understood. Do not get this material in contact with eyes. Avoid contact with eyes, skin, and
clothing. Avoid prolonged exposure. Do not taste or swallow. When using, do not eat, drink or
smoke. Should be handled in closed systems, if possible. Provide adequate ventilation. Wear
appropriate personal protective equipment. Wash hands thoroughly after handling. Avoid release
to the environment. Wash contaminated clothing before reuse. Observe good industrial hygiene
practices.
Store locked up. Store in original tightly closed container. Store away from incompatible materials
(see Section 10 of the SDS).
8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Components
Type
Titanium Dioxide (CAS
13463-67-7)
US. ACGIH Threshold Limit Values
Components
Value
Form
PEL
15 mg/m3
Total dust.
Type
Value
TWA
10 mg/m3
TWA
1 mg/m3
Titanium Dioxide (CAS
13463-67-7)
Zeolites (CAS 1318-02-1)
Form
Respirable fraction.
Biological limit values
No biological exposure limits noted for the ingredient(s).
Appropriate engineering
controls
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level. Provide
eyewash station.
Individual protection measures, such as personal protective equipment
Wear safety glasses with side shields (or goggles) and a face shield.
Eye/face protection
Skin protection
Hand protection
Other
Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove
supplier.
Wear appropriate chemical resistant clothing.
Respiratory protection
In case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene
considerations
Keep away from food and drink. Always observe good personal hygiene measures, such as
washing after handling the material and before eating, drinking, and/or smoking. Routinely wash
work clothing and protective equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Liquid.
Form
Liquid.
Color
Not available.
Odor
Not available.
Material name: UNITED COATINGS ELASTUFF 120 ROLLER GRADE PART B
Version #: 02 Revision date: 11-23-2015
SDS 3056
SDS US
3/8
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
-40 °F (-40 °C) estimated
Initial boiling point and boiling
range
471.56 °F (244.2 °C) estimated
Flash point
260.0 °F (126.7 °C) estimated
Evaporation rate
Not available.
Flammability (solid, gas)
Not applicable.
Upper/lower flammability or explosive limits
Not available.
Flammability limit - lower
(%)
Flammability limit - upper
(%)
Not available.
Explosive limit - lower (%)
Not available.
Explosive limit - upper (%)
Not available.
Vapor pressure
0.002 hPa estimated
Vapor density
Not available.
Relative density
Not available.
Solubility(ies)
Solubility (water)
Not available.
Partition coefficient
(n-octanol/water)
Not available.
Auto-ignition temperature
680 °F (360 °C) estimated
Decomposition temperature
Not available.
Viscosity
Not available.
Other information
Density
8.31 lbs/gal
Flammability class
Combustible IIIB estimated
Percent volatile
0.33 %
Specific gravity
1
VOC
0.023473 lbs/gal Material estimated
0.023473 lbs/gal Regulatory estimated
2.81277 g/l Material estimated
2.81277 g/l Regulatory estimated
10. Stability and reactivity
Reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.
Chemical stability
Material is stable under normal conditions.
Possibility of hazardous
reactions
No dangerous reaction known under conditions of normal use.
Conditions to avoid
Contact with incompatible materials.
Incompatible materials
Strong oxidizing agents.
Hazardous decomposition
products
No hazardous decomposition products are known.
11. Toxicological information
Information on likely routes of exposure
Prolonged inhalation may be harmful.
Inhalation
Skin contact
Harmful in contact with skin.
Eye contact
Causes serious eye damage.
Ingestion
Harmful if swallowed.
Material name: UNITED COATINGS ELASTUFF 120 ROLLER GRADE PART B
Version #: 02 Revision date: 11-23-2015
SDS 3056
SDS US
4/8
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
vision. Permanent eye damage including blindness could result.
Symptoms related to the
physical, chemical and
toxicological characteristics
Information on toxicological effects
Harmful in contact with skin. Harmful if swallowed.
Acute toxicity
Components
Species
Test Results
Mouse
1900 mg/kg
Rat
1400 mg/kg
2-Ethyl-1,3-hexanediol (CAS 94-96-2)
Acute
Oral
LD50
* Estimates for product may be based on additional component data not shown.
Prolonged skin contact may cause temporary irritation.
Skin corrosion/irritation
Causes serious eye damage.
Serious eye damage/eye
irritation
Respiratory or skin sensitization
Not a respiratory sensitizer.
Respiratory sensitization
This product is not expected to cause skin sensitization.
Skin sensitization
Germ cell mutagenicity
No data available to indicate product or any components present at greater than 0.1% are
mutagenic or genotoxic.
Carcinogenicity
Suspected of causing cancer.
IARC Monographs. Overall Evaluation of Carcinogenicity
Titanium Dioxide (CAS 13463-67-7)
2B Possibly carcinogenic to humans.
Zeolites (CAS 1318-02-1)
3 Not classifiable as to carcinogenicity to humans.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)
Not listed.
Reproductive toxicity
This product is not expected to cause reproductive or developmental effects.
Specific target organ toxicity single exposure
Not classified.
Specific target organ toxicity repeated exposure
Not classified.
Aspiration hazard
Not an aspiration hazard.
Chronic effects
Prolonged inhalation may be harmful. Prolonged exposure may cause chronic effects.
12. Ecological information
Ecotoxicity
Harmful to aquatic life with long lasting effects.
Components
Species
Test Results
Channel catfish (Ictalurus punctatus)
624 mg/l, 96 hours
Water flea (Daphnia magna)
> 1000 mg/l, 48 hours
Mummichog (Fundulus heteroclitus)
> 1000 mg/l, 96 hours
2-Ethyl-1,3-hexanediol (CAS 94-96-2)
Aquatic
Fish
LC50
Titanium Dioxide (CAS 13463-67-7)
Aquatic
Crustacea
EC50
Fish
LC50
* Estimates for product may be based on additional component data not shown.
No data is available on the degradability of this product.
Persistence and degradability
Bioaccumulative potential
Mobility in soil
No data available.
Other adverse effects
No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.
Material name: UNITED COATINGS ELASTUFF 120 ROLLER GRADE PART B
Version #: 02 Revision date: 11-23-2015
SDS 3056
SDS US
5/8
13. Disposal considerations
Disposal instructions
Local disposal regulations
Hazardous waste code
Waste from residues / unused
products
Contaminated packaging
Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allow
this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches
with chemical or used container. Dispose of contents/container in accordance with
local/regional/national/international regulations.
Dispose in accordance with all applicable regulations.
The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Dispose of in accordance with local regulations. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe manner (see:
Disposal instructions).
Since emptied containers may retain product residue, follow label warnings even after container is
emptied. Empty containers should be taken to an approved waste handling site for recycling or
disposal.
14. Transport information
DOT
Not regulated as dangerous goods.
IATA
Not regulated as dangerous goods.
IMDG
Not regulated as dangerous goods.
Transport in bulk according to Not established.
Annex II of MARPOL 73/78 and
the IBC Code
15. Regulatory information
US federal regulations
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
Diethyltoluenediamine (CAS 68479-98-1)
CERCLA Hazardous Substance List (40 CFR 302.4)
Not listed.
SARA 304 Emergency release notification
1.0 % One-Time Export Notification only.
Not regulated.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)
Not listed.
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Immediate Hazard - Yes
Hazard categories
Delayed Hazard - Yes
Fire Hazard - No
Pressure Hazard - No
Reactivity Hazard - No
SARA 302 Extremely hazardous substance
Not listed.
SARA 311/312 Hazardous
chemical
No
SARA 313 (TRI reporting)
Not regulated.
Other federal regulations
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
Not regulated.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Not regulated.
Not regulated.
Safe Drinking Water Act
(SDWA)
Material name: UNITED COATINGS ELASTUFF 120 ROLLER GRADE PART B
Version #: 02 Revision date: 11-23-2015
SDS 3056
SDS US
6/8
US state regulations
US. California Controlled Substances. CA Department of Justice (California Health and Safety Code Section 11100)
Not listed.
US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3, subd.
(a))
Titanium Dioxide (CAS 13463-67-7)
US. Massachusetts RTK - Substance List
Titanium Dioxide (CAS 13463-67-7)
US. New Jersey Worker and Community Right-to-Know Act
Titanium Dioxide (CAS 13463-67-7)
US. Pennsylvania Worker and Community Right-to-Know Law
Titanium Dioxide (CAS 13463-67-7)
US. Rhode Island RTK
Not regulated.
US. California Proposition 65
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other
reproductive harm.
US - California Proposition 65 - CRT: Listed date/Carcinogenic substance
Carbon Black (CAS 1333-86-4)
Listed: February 21, 2003
Titanium Dioxide (CAS 13463-67-7)
Listed: September 2, 2011
US - California Proposition 65 - CRT: Listed date/Developmental toxin
N-Methyl-2-Pyrrolidone (CAS 872-50-4)
Listed: June 15, 2001
International Inventories
Country(s) or region
Australia
Inventory name
Australian Inventory of Chemical Substances (AICS)
On inventory (yes/no)*
No
Canada
Domestic Substances List (DSL)
No
Canada
Non-Domestic Substances List (NDSL)
No
China
Inventory of Existing Chemical Substances in China (IECSC)
No
Europe
European Inventory of Existing Commercial Chemical
Substances (EINECS)
No
Europe
European List of Notified Chemical Substances (ELINCS)
No
Japan
Inventory of Existing and New Chemical Substances (ENCS)
No
Korea
Existing Chemicals List (ECL)
No
New Zealand
New Zealand Inventory
No
Philippines
Philippine Inventory of Chemicals and Chemical Substances
(PICCS)
No
United States & Puerto Rico
Toxic Substances Control Act (TSCA) Inventory
No
*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).
16. Other information, including date of preparation or last revision
Issue date
03-12-2015
Revision date
11-23-2015
Version #
02
Health: 3*
Flammability: 0
Physical hazard: 0
Health: 3
Flammability: 0
Instability: 0
HMIS® ratings
NFPA ratings
Material name: UNITED COATINGS ELASTUFF 120 ROLLER GRADE PART B
Version #: 02 Revision date: 11-23-2015
SDS 3056
SDS US
7/8
Disclaimer
This information relates to the specific material designated and may not be valid for such material
used on combination with any other materials or in any process. Such information is to the best of
our knowledge and belief accurate and reliable as of the date compiled. However, no
representation, warranty or guarantee, expressed or implied, is made as to its accuracy, reliability,
or completeness. GAF cannot anticipate all conditions under which this information and product, or
the products of other manufacturers in combination with this product, may be used. It is the user’s
responsibility to satisfy himself as to the suitability and completeness of such information for his
particular use. The information given is designed only as guidance for safe handling, use,
processing, storage, transportation, disposal and release. We do not accept liability for any loss or
damage that may occur from the use of this information. Nothing herein shall be construed as a
recommendation for uses which infringe valid patents or as extending a license of valid patents.
Revision Information
Product and Company Identification: Converted to GAF SDS
Material name: UNITED COATINGS ELASTUFF 120 ROLLER GRADE PART B
Version #: 02 Revision date: 11-23-2015
SDS 3056
SDS US
8/8
Download