UNCTAD 17th Africa OILGASMINE, Khartoum, 23-26 November 2015 Extractive Industries and Sustainable Job Creation The Role of the Petroleum Training Center in the Development of the Oil Sector Workforce in Sudan By Hamid Suliman, Technical Training Manager, Petroleum Training Center, Sudan The views expressed are those of the author and do not necessarily reflect the views of UNCTAD. Republic of Sudan Ministry of Petroleum & Gas The Role of the Petroleum Training Center in the Development of the Oil Sector Workforce in Sudan 1 of 51 Contents Introduction Facilities Achievements Activities Future Prospects Visitors 2 of 51 About PTC The PTC was inaugurated on 27 June 2000. Petroleum Training Centre (PTC) is a training, and consultancy institution specialized in the sphere of petroleum and Energy. It represents an arm of the Sudanese Petroleum Corporation (SPC) for attaining the development of human resources and upgrading the performance of the SPC workforce in particular, and the petroleum Sector in general. 3 of 51 PTC General Approach: The General Training Approach of the PTC is: • Training activities are based and geared in accordance with the competency based training approach. • PTC utilizes the services of the most outstanding experts and institutions worldwide. 4 of 51 The PTC Interrelations • Most of the national training centres in the Sudan. • PERMATA Institute of Malaysia. • Arab Petroleum Training Institute - Iraq. • The International Atomic Energy Agency (IAEA). • The United Nations Industry Development Organization (UNIDO). • Joint Effort Group- Jordan. 5 of 51 The PTC Interrelations (continued) • ENPI corporation, Egypt. • Italian Institute for Petroleum. • TRISTAR Corporation in Scotland. • The French Institute for Petroleum. (INSP) * Team International - Egypt • British Institute for Petroleum (IP) 6 of 51 PTC Major Clients 7 of 51 PTC Training Rooms 8 of 51 PTC Syndicate room 9 of 51 PTC Computer Lab 10 of 51 PTC Conference Hall 11 of 51 PTC Engineering inspection lab 12 of 51 PTC Welding workshop PTC has a well equipped welding workshop with high technology welding machines. Attached to the workshop a welding simulator for virtual training 13 of 51 PTC Library 14 of 51 Instructors & Trainees Residence Building: AREA: 550 square meters CAPACITY: 20 Instructors 80 Trainees 15 of 51 Training programs (2000 – 2015) Year Techn’l IT Finan’l & Econ’c Mgt. Lang’s Total 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 8 8 10 12 26 21 40 34 26 27 36 45 55 46 60 46 6 5 7 20 10 8 7 12 9 22 21 12 11 20 19 9 1 6 2 9 8 8 10 10 12 14 14 13 13 12 22 11 3 26 26 27 16 23 25 33 29 55 46 30 44 45 59 39 0 0 0 0 0 0 0 0 0 6 10 15 8 32 22 20 18 45 45 68 60 60 82 89 76 124 127 115 131 155 182 125 Total 500 198 526 113 1502 165 16 of 51 Numbers of conducted training programs (2000 – 2015) 182 155 124 127 125 115 131 89 82 68 60 45 45 2001 2002 76 60 18 2000 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 No. of Participants (2000 – 2015) 18 of 51 Year Total 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 389 957 1163 1255 975 1410 1749 1626 1087 1975 1778 2399 1919 2295 2096 1388 Total 23073 Total Nos of Trainees /year 3000 2399 2500 2295 2096 1975 2000 No. of Trainees 1749 1919 1626 1778 1410 1500 1388 1255 1163 957 1000 1087 975 500 389 0 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 No. Experts & Trainers (2000 – 2015) 20 of 51 Year National Foreign Total 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 Total 10 44 54 52 22 38 23 50 30 50 57 45 48 96 124 110 853 17 18 22 22 46 39 81 68 57 93 80 79 98 64 58 15 857 27 62 76 74 68 77 104 118 87 143 137 124 146 160 182 125 1710 Nationally & Foreigner Trainers /year 140 124 120 93 79 60 54 68 52 39 44 40 18 17 22 22 22 64 57 57 50 50 46 38 0 96 80 81 80 20 110 98 100 58 45 48 30 23 15 10 National Foreign Workshops and Seminars conducted from 2002 to 2015 No. of Workshops and Seminars: Mgt Technical Financial IT Total 28 12 1 1 42 No. of participants SPC Other companies Total 469 1063 1532 No. of Instructors National Foreigner Total 27 26 53 22 of 51 START Identification of training needs Compilation of requests and market survey with consistency of Gov. General Strategic objectives Design content and programming Training courses Training Needs Analysis Needs doable Implementation of training Training Planning The possibility of execution NO Promotion of programs Plan Training content evaluation Review confirmation of the participants Environment Training Evaluation Search for alternatives NO Is sufficient nominations YES YES Training Evaluation Program Evaluate the program Instructor postponement Evaluation of participants YES Send content to experts to make the offer NO Select the program coordinator Reasonable apologize NO Instructor certified or not F Is Instructor National or foreign YES End of the program Recruitment Instructor measures N NO Verification of the Instructor's qualifications Review Instructor evaluation in the previous period Instructor suitable for Evaluated average more than 70% implementation YES Included an Instructor on record under accreditation Prepare Training Material NO Follow-up and control program YES Select the program Instructor The program included in the training plan Key Map: Small stage inside the transmission Transition between the two phases Optimization of the process sites Implementation of optimization sites Training Courses Technical & Engineering. Upstream Programs: production Exploration and Down stream Programs: Refining, transportation, storage and Receiving Facilities Welding and Engineering Inspection:(DT & NDT) 25 of 51 Training Courses Management & planning. Finance & Economics. Environment & Safety. Information Technology. English & Chinese Languages. 26 of 51 Non-Destructive Testing Training: High Electrical Potential • Radiography Electrons • Eddy Current + • Ultrasonic X-ray Generator or Radioactive Source Creates Radiation • Magnetic Particle • Visual Testing • Liquid Penetrant Radiation Penetrate the Sample Exposure Recording Device 27 of 51 Non-Destructive Testing Training: 28 of 51 Welding Training Courses The welding training programs are designed to comply with IIW requirements 29 of 51 Welding Training Courses PTC has started welding training courses since 2014. SR 1 Course Title Basics of Welding and Metal Fabrication No. of Participants 8 3 4 Cutting and Welding for Maintenance MIG Welding - Basic TIG Welding - Basic 10 10 5 SMAW - Basic 10 2 6 7 Fundamentals of Welding Fundamentals of Welding Total 30 of 51 8 5 10 61 NDT & Welding Technical Services: Also PTC started providing technical consultancy in the field of NDT & welding since 2014. SR 1 2 Client Flame for Engineering & Supplies Eltyeb Abdullah Mohamed 3 Petrodar Operating Co. 4 Sudanese Pipelines Co. 5 Sudanese Pipelines Co. 31 of 51 Services Welders Qualification Test Sample Test Welders Qualification Test (WQT) Welders Qualification Test (WQT) Welders Qualification Test (WQT) Languages Training(English + Chinese) 1- ENGLISH LANGUAGE TRAINING 32 of 51 Languages Training ENGLISH LANGUAGE TRAINING Process: Sit for placement test Determine the participant level Complete the General English levels Participants able to enroll in any Special English Courses ENGLISH LANGUAGE TRAINING 33 of 51 2. CHINESE LANGUAGE TRAINING: With the growing relationship between the Sudan and China, the need for Chinese language training has become very explicit. The PTC with assistance from CNPC started a Chinese language training program as of February 2015. The program is conducted in collaboration with Confucius Institute of the University of Khartoum. 34 of 51 Workshops and Seminars 35 of 51 DEVELOPMENT OF NATIONAL TRAINERS: The first group of Training of the Trainers Program 36 of 51 Publications A. Technical & Management Publications 1- English-Arabic Dictionary of Geophysical Terms 2- Oil & Gas: Formation, Accumulation, and Migration 3- Oil & Gas: Environmental & Climate Impact 4- Terms & Abbreviations in Oil Industry 37 of 51 Publications B- Oil & Gas Magazine 38 of 51 Future Plans: Extend training services to countries in the region. Obtaining Accreditation from International Certifying bodies (NDT, Welding, HSE,..etc) Introducing E-Learning System for special types of courses. Completing phase II of the PTC training services by setting up Technical workshops. Introducing Leadership Training packages. 39 of 51 Official Invitation • Dear Conference Guests • You are invited to visit us in PTC to get more familiar with our facilities and capabilities. • Our PR in the exhibition will arrange transport for you. 40 of 51 41 of 51