Data Sheet MEFLUROEN
Fluorodyne® Filters
Description
The Fluorodyne filter has been developed to meet the stringent
requirements of today’s high purity DI water applications.
Rated 0.2μm, 0.1μm and 40nm, Fluorodyne filters offer ready
wettability and broad chemical compatibility. All Fluorodyne
filters are constructed of a unique modified PVDF membrane,
providing superior bacteria and particle removal efficiency in
demanding environments.
Features
•
•
•
•
•
•
Excellent particle removal efficiency
Three removal ratings available
Many configurations
Manufactured in a cleanroom environment
No prewetting required
100% integrity tested
Specifications
Materials of Construction
Components
Materials
Filter Medium
Hydrophilic PVDF
Support and Drainage
Polypropylene
Core and Cage
Polypropylene
End Caps
Polypropylene
O-ring Options
Acid-proof Fluoroelastomer, EPDM
Silicone, FEP Encapsulated Fluoroelastomer
Sealing Methods
Melt seal
Removal Rating and Operating Conditions
1
Removal Ratings
0.2 μm, 0.1 μm, 40 nm
Nominal Filter Areas
10"
20"
30"
40"
Maximum Operating Temperature
70˚C1 / 158 ˚F
Maximum Forward Differential Pressure
0.55 MPa @ 50 ˚C / 80 psid @ 122 ˚F
0.34 MPa @ 70 ˚C / 50 psid @ 158 ˚F
:
:
:
:
7 ft2 / 254 mm : 0.7 m2
14 ft2 / 508 mm : 1.3 m2
21 ft2 / 762 mm : 2.0 m2
28 ft2 / 1016 mm : 2.6 m2
Only for deoxygenated water systems and for aqueous liquids not containing alkalis.
Nominal Length
Nominal Filter Areas
254 mm / 10 in
2
2
0.7 m / 7 ft
508 mm / 20 in
2
2
1.3 m / 14 ft
762 mm / 30 in
2
2
2.0 m / 21 ft
1016 mm / 40 in
2.6 m2 / 28 ft2
Clean pressure drop (MPa)
Pressure Drop vs. Liquid Flow Rate (Water, 20℃)
AB1V001
0.03
AB1V0004
0.02
AB1V002
0.01
0
10
20
Flow rate (L/min)
Part Numbers / Ordering Information
AB 1 V 2
3 EY 4
Table 1
Table 2
Code
Nominal Cartridge Length
Code
Removal Ratings
1
254 mm / 10 in
002
0.2 μm
2
508 mm / 20 in
001
0.1 μm
3
762 mm / 30 in
0004
40 nm
4
1016 mm / 40 in
Table 4
Table 3
Code
O-ring Specifications
3
AS568A-222
7
AS568A-226
8
AS568A-222
Features
Code
O-ring Materials
222 double O-ring
H1
FEP Encapsulated Fluoroelastomer
Flat End
H4
Silicone
226 double O-ring
HF
Acid-proof Fluoroelastomer
Bayonet lock / finned end
J
EPDM
222 double O-ring
Finned End
Representative example part numbers
AB1V0023EYH4
AB1V0013EYH4
AB1V00043EYH4
AB2V0023EYH4
AB2V0013EYH4
AB2V00043EYH4
AB2V0028EYH4
AB2V0018EYH4
AB2V00048EYH4
AB3V0027EYH4
AB3V0017EYH4
AB3V00047EYH4
AB3V0028EYH4
AB3V0018EYH4
AB3V00048EYH4
AB4V00048EYH4
Microelectronics
25 Harbor Park Drive
Port Washington, NY 11050
+1 800 360 7255
toll free US
+1 516 484 3600
telephone
+1 516 801 9711
fax
microelectronics@pall.com
Nihon Pall Ltd.
6-5-1, Nishishinjuku,
Shinjuku-ku
Tokyo 163-1325 Japan
+81 3 6901 5700
telephone
+81 3 5322 2109
fax
Visit us on the Web at www.pall.com/micro
Pall Corporation has offices and plants throughout the world. For Pall representatives in your
area, please go to www.pall.com/corporate_contact.asp.
Because of technological developments related to the products, systems, and/or services
described herein, the data and procedures are subject to change without notice. Please consult your Pall representative or visit www.pall.com to verify that this information remains valid.
Products in this document may be covered by one or more
of the following patent numbers: US5543047; US5690765; US6113784; US7083564; US7318800;
EP0982061; EP0667800; EP1380331.
© Copyright 2015, Pall Corporation. Pall,
® Indicates a trademark registered in the USA.
MEFLUROEN
and Fluorodyne are trademark of Pall Corporation.
is a service mark of Pall Corporation.
July 2015