CODS2 Central Office Distribution System DISCONTINUED PRODUCT

DISCONTINUED

PRODUCT

CODS2

Central Office Distribution System

Outside Plant for

Business-Critical Continuity

Key Features

• Over and under administration allows shortest jumper runs, reduces labor and congestion

• Generous jumper troughs and grooming bars provide neat, efficient frame administration

• Cable pairs count sequentially to promote efficient administration

• Connectorized blocks and protection panels reduce installation time; initial termination wiring errors eliminated

• Single-sided jumpering reduces labor and increases cost savings

• Reduced frame congestion increases frame longevity

Description

For all medium to large central office applications, Emerson Network Power offers the

CODS2 modular distribution system. The CODS2 is the latest state-of-the-art central office system, with flexibility that enables Emerson to engineer a system to meet your specific application. The CODS2 can be configured for side-by-side jumper administration by using our patented over and under arrangement.

The framework lineup is ordered and installed in modular increments. Two modules are joined together to form a CODS2 section, which can protect and terminate 7200 cable pair, as well as 956 equipment and tie pairs. These sections are joined together in one or more lineups to obtain the desired capacity. Vertical jumper troughs are provided between each frame section for jumper access to horizontal jumper troughs and access to the express trough at the top of the frame for long jumpers.

The protection side of the frame mounts the Emerson front-administered RG70 Central

Office Connector. This connector is equipped with four 25-pair RJ2 connectors on the equipment side of the protection to provide convenient terminations.

The cross-connect side of the CODS2 frame has twelve horizontal mounting shelves, six blocks wide, to hold a maximum of 72 line terminal blocks on each frame section. The horizontal terminal block shelves are separated by horizontal jumper troughs equipped with grooming bars for organized jumpering.

The CODS2 frame employs the rotating high density 2376, 2377, and 2378 Series line terminal blocks, which offer a choice of single wire-wrap, bifurcated quick-clip, or bifurcated wire-wrap terminals. These blocks are available in connectorized and non-connectorized versions in pair counts to match specific applications.

The CODS2 incorporates tie cables engineered to specific requirements, which enables

OSP cables on the protector side to count in sequential order.

Application

The CODS2 system is designed for medium to large central office applications. The CODS2 is a complete system, with all frame modules, connectors, terminal blocks, and tie cables engineered to meet specific applications.

OSPDS-0000 / 0705

CODS2 Central Office Distribution System

Dimensions

H

7-ft. or 8-ft.

W

45-3/4-in.

D

25-in.

Ordering Information

Catalog

Number

CODS23000

CODS23600

CODS2EG

CODS2EG7

CODS2VT

CODS2JJ

CODS2EGJJ

CODS2VTJJ

CODS2VCR

Part

Number

F0483

F04054

F04055

F0485

F04053

F044

F0448

F0449

F0464

Description

MDF double-sided module, 7-ft. frame

MDF double-sided module, protection capacity to 36 00-pair RG70 connectors and 36 2376 Series connectorized wire-wrap panels

End guard for CODS2 mounts on end line for cabinet-like appearance

End guard for 7-ft. frame

Vertical jumper trough for routing wires between adjacent horizontal terminal blocks

Double-sided jumper frame module, mounts up to 36 2376-style blocks on each side

End guard for CODS2JJ, order one per end

Vertical jumper trough to be used with CODS2JJ

Vertical cable rack for end of lineup

NOTE 1: Other configurations are available; contact your sales representative for specific applications.

NOTE 2: See the CO & Remote Connectors & Blocks section for information on the RG710 central office connector and the 2376, 2377, 2378 Series line terminal blocks.

Emerson Network Power.

The global leader in enabling businesscritical continuity.

Emerson Network Power

Energy Systems

4350 Weaver Parkway, Warrenville, IL 60555

Toll Free: 800-800-280 (USA and Canada)

Telephone: 440-246-6999 Fax: 440-246-4876 www.EmersonNetworkPower.com/EnergySystems

2

2376 Line Terminal Blocks Mounted on the CODS2

• AC Power Systems

• Connectivity

• DC Power Systems

• Embedded Computing

Embedded Power

• Integrated Cabinet Solutions

• Outside Plant

• Power Switching & Control

© 2006 Emerson Network Power Energy Systems,

North America, Inc. All rights reserved.

The Emerson logo is a trademark and a service mark of Emerson Electric Co. Emerson Network Power is a division of Emerson Electric Co.

Printed in USA

• Precision Cooling

• Services

• Site Monitoring

• Surge Protection

DISCONTINUED

PRODUCT

OSPDS-0000 / 0705