BILL OF QUANTITIES (BOQ)
Name of Works :- Construction of School of Education At Mizoram University, Tanhril, Aizawl.
Sl SOR
Particulars
Quantity
Unit
No
No
in Figure
1
2.06 Earthwork in excavation over areas (exeeding 30cm in
depth,1.5m in width as well as 10sqm on plan)
including disposal of excavated earth, lead upto 50m
7160.27
m3
and lift upto 1.5m, disposed earth to be levelled and
neatly dressed.
a) Ordinary and Hard Soil
2
2.07 Earthwork in excavation in foundation trenches or
drains etc. (not exceeding 1.5m in width or 10sqm on
plan) including dressing of sides and ramming of
bottoms, lift upto 1.5m including getting out excavated
3081.28
m3
soil and disposal of surplus excavated soil as directed
within a lead of 50 metres.
b) Hard Soil ( pick work ).
3
4
5
4.04
5.33
5.21
Providing and laying in position cement concrete of
specified grade excluding cost of centering and
shuttering - All work upto plinth level:
b) 1 : 4 : 8 (1 cement : 4 course sand : 8 stone aggregate
40mm nominal size)
377.08
m3
a) All work upto foundation & plinth level.
294.95
m3
b) All work above plinth level upto floor V level.
2273.18
m3
428858.69
kg
Providing and laying in position machine batched,
machine mixed and machine vibrated design mix M-20
grade reinforced cement concrete excluding cost of
centering and shuttering and reinforcement in -
Steel reinforcement for RCC work including
straightening, cutting, bending, placing in position and
binding all complete.
f) Thermo-Mechanically Treated bars.
1
Tender Amount :
Rate
in Words
Rs. 13,09,46,867.00P
Amount
BILL OF QUANTITIES (BOQ)
6
7
8
9
10
11
5.11
2.18
7.08
7.17
6.01
6.02
Centering and shuttering including strutting,
propping, etc. and removal of form works in a) Foundations, footings, bases of columns etc. for
mass concrete.
238.08
m2
c) Columns, pillars, piers, abutments, posts and struts.
3427.09
m2
d) Lintels, beams, plinth beams, girders, bressumers
and cantilevers, etc.
4104.10
m2
e) Suspended floors, roofs, landings, shelves and their
support, balconies and chajjaj, etc.
7425.96
m2
f) Staircases (except spiral staircase) excluding landings.
531.56
m2
239.80
m2
2524.35
m3
1573.77
m3
108.89
m3
First class brickwork in foundation and plinth in:
b) in cement mortar 1: 4 ( 1 cement : 4 coarse sand )
23.47
m3
First class brickwork in superstructure above plinth
level upto floor V level in:
b) in cement mortar 1: 4 ( 1 cement : 4 coarse sand )
114.85
m3
k) Vertical and horizontal fins individually or forming
box, louvres and bends, eaves boards.
Filling available excavated earth (excluding rock ) in
trenches, plinth, etc. in layers not exceeding 20 cms in
depth, consolidating each layer by ramming and
watering and dressing lead upto 50 meters and lift
upto 1.50 meters.
Coursed masonry with rectangular sized hard stone
in foundation upto one storey above and below
ground level including curing, etc. complete.
b) in cement mortar 1 : 4 ( 1cement : 4 fine sand)
Back filling behind abutment, wing wall and return
wall complete as per drawing and Technical
Specification.
b) Sandy material.
2
BILL OF QUANTITIES (BOQ)
12
13
14
15
16
17
18
6.05
5.16
9.06
14.01
9.11
26.01
26.04
Half brick masonry in first class brickwork in
foundation upto one storey above and below ground
level including curing, etc. complete.
b) in cement mortar 1 : 4 ( 1 cement : 4 fine sand )
5213.15
m2
Providing and fixing MS fan clamp 12mm dia HYSD
bar bent to shape with hooked endin RCC slabs during
laying including painting the exposed portion of loop
complete.
157.00
Nos
8.41
m3
780
Nos
218.63
m2
630.00
m2
112.80
m2
Providing Ist class local wood dressed in frames of
chaukhat for doors, windows, clerestory windows
fixed in position.
Providing 40 x 5mm flat iron hold fast 40 cm long
including fixing to frame with 10mm dia. bolts, nuts
and wooden plugs and embeddings in cement concrete
block 30 x 10 x 15cm 1:3:6 mix (1 cement : 3 sand : 6 well
graded stone aggregate 20 mm nominal size)
Providing and fixing 1st class local wood panelled
shutters for doors etc. including M.S. butt hinges with
necessary screws, etc. complete.
a) 40 mm thick.
Making plinth protection 50mm thick of cement
concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
aggregate 20 mm nominal size) over 75mm bed of dry
brick ballast 40mm nominal size well rammed and
consolidated and grouted with fine sand including
finishing the top smooth.
Providing and fixing stone slab table rubbed and
polished of size 105cmx60cm deep and 1.8 cm thick
fixed in urinal partitions with cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregate 6 mm
nominal size) and finished smooth.
a) White Agaria Marble Stone
3
BILL OF QUANTITIES (BOQ)
19
20
21
22
23
26.17
9.61
14.28
14.29
14.32
Providing and fixing 30mm thick factory made PVC
rigid foam panelled door shutters manufactured by
M/s. Rajshri or equivalent made from M.S. tube of
19x19mm, 19 gauge for styles and 15x15mm for top
and bottom rails, covered with heat moulded
prelaminated PVC "C" channel of 5mm thick sheet and
30x50mm wide to form styles and 5mm thick and
75mm wide prelaminiated PVC sheets for top rail, lock
rail and bottom rail on either side and 5mm thick,
20mm wide cross PVC sheet as gap insert for top rail
and bottom rail, panelling of 5mm thick PVC sheet
prelaminiated on both sides fitted in the M.S. frame
welded/ sealed to the styles and rails with 5x30mm
prelaminated PVC sheet beading on either side and
joined together with solvent cement adhesive etc.,
complete as per manufacturers specification and
direction of Engineer-in-Charge fixed to frames with 4
Nos. M.S. powder coated butt hinges (For Internal
Shutters).
Providing and fixing dressed & chamfered 1st class
local wood door and window architrave of size fixed
with wooden plug on door chaukhat etc complete.
b) 75mm X 30mm
Providing and fixing brass sliding door bolts (aldrops)
bright finished with nuts and screws etc. complete.
a) 300 x 16 mm
Providing and fixing brass tower bolts (socket bolts)
bright finished with necessary screws etc. complete.
a) 300 mm
Providing and fixing brass handles with necessary
screws, etc. complete.
a) 150mm
90.72
m2
897.00
rm
82
Nos
284
Nos
284
Nos
4
BILL OF QUANTITIES (BOQ)
24
Providing and fixing anodised aluminium work for
21.1
doors, windows, ventilators and partitions with
DSR
07+109 extruded built up standard tubular and other sections
% CI of approved make conforming to IS: 733 and IS : 1285,
anodised transparent or dyed to required shade
according to IS : 1868. (Minimum anodic coating of
grade AC 15), fixed with rawl plugs and screws or with
fixing clips, or with expansion hold fastners including
necessary filling up of gaps at junctions, at top, bottom
and sides with required PVC/neoprene felt etc.
Aluminium sections shall be smooth, rust free, straight,
mitred and jointed mechanically wherever required
including cleat angle, Aluminium snap beading for
glazing / paneling, C.P. brass / stainless steel screws,
all complete as per architectural drawings and the
directions of Engineer-in-charge. (Glazing and paneling
to be paid for separately ) .
21.1.2
For shutters of doors, windows & ventilators including
providing and fixing hinges/ pivots and making
provision for fixing of fittings wherever required
including the cost of PVC / neoprene gasket required
(Fittings shall be paid for separately).
21.1.2.3
Polyester powder coated aluminium (minimum
thickness of polyester powder coating 50 micron)
25
11.02
Supplying of glass panes at site.
c) 4mm thickplate sheet glass.
26
21.15
20mm cement plaster 1 : 4 (1 cement : 4 fine sand).
27
21.11
15mm cement plaster 1 : 4 (1 cement : 4 fine sand).
28
21.25
6mm cement plaster to ceiling 1 : 4 (1 cement : 4 fine
sand).
6976.48
kg
768.52
m2
5586.11
m2
9970.31
m2
12061.63
m2
5
BILL OF QUANTITIES (BOQ)
29
30
31
32
12.16
12.20
12.37
12.38
Providing & laying vitrified floor tiles in different sizes
(thickness to be specified by the manufacture) with
water absorption less than 0.08% and conforming to
IS:15622,of approved make, in all colours and shades,
laid on bed of 20mm thick cement mortar 1 : 4
(1cement:4course sand), includingthe joints with
white cement and matching pigments etc.complete.as
per design colours.
c) Double charge
5254.12
m2
Providing & laying vitrified floor tiles in different sizes
(thickness to be specified by the manufacture) with
water absorption less than 0.08% and conforming to
IS:15622,of approved make, in all colours and shades,
in skirting , riser of steps, over 12mm thick bed of
cement mortar 1 :3 (1cement:3course sand), including
the joints with white cement and matching pigments
etc.complete.
c) Double charge
1045.87
m2
284.15
m2
110.10
m2
Marble stone flooring 18mm thick marble stone as per
sample of marble apeoved by Engineer-in-Charge, over
20mm thick base of cement mortar 1:4 (1cement
:4coarse sand) laid and jointed with white cement
slurry including rubbing and polishing complete.
a) Raj Nagar Plain white marble/green white marble
White/coloured marble tile 18mm thick in skirting,
riser of steps, dado upto 2m height, on 12mm (average)
thick base of cement mortar 1:3 and jointed with white
cement slurry @ 3.3kg/sqm including pointing in
white cement mixed with pigment of matching shade
complete.
6
BILL OF QUANTITIES (BOQ)
33
34
35
8.02
12.26
10.19
Providing and fixing 18 mm thick gang saw cut, mirror
polished, premoulded and prepolished, machine cut
for kitchen platforms, vanity counters, window sills,
facias and similar locations, of required size, approved
shade, colour and texture laid over 20 mm thick base
cement mortar 1:4 (1 cement : 4 coarse sand), joints
treated with white cement, mixed with matching
pigment, epoxy touch ups, including rubbing, curing,
moulding and polishing to edges to give high gloss
finish etc. complete at all levels.
c) Granite(general black) Area of slab upto 0.50 sqm
Providing and fixing ceramic glazed wall tiles of size
240x300mm or more conforming to IS : 15622
(thickness to e specified by the manufacturer)of
approved make, in colours, such as White, Ivory,
Grey, Fume Red Brown, over 20mm thick bed of
cemunt mortar 1:4 (1cement :4 coarse sand) and
jointing with cement slurry @ 3.30kg per sq m,
including pointing in white cement mixed with
pigment of matching shade complete.
a) (ii) Plain 200 mm x 300 mm
Steel work welded in built up sections/framed work
including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer
using structural steel etc. as required.
a) In stringers, treads, landings etc. of stair-cases
including use of chequered plates wherever required;
all complete
60.12
m2
953.69
m2
14901.81
kg
7
BILL OF QUANTITIES (BOQ)
36
37
38
39
40
20.31
20.32
16.32
16.33
16.34
Applying double coated cement slurry with water
proofing chemical (latex or equivalent chemical) in
proportion 1 : 4 : 5 ( 1 latex : 4 water : 5 cement )
including cleaning the treated surfaces with brushes
etc.
Two time after coating with water proofing chemical
Roof
Extra for providing and mixing water proofing
chemical (latex or equivalent chemical) @ 2kg per bag
of cement in c) 15mm cement plaster 1 : 3 (1 cement : 3 fine sand).
Providing and fixing on wall face unplasticised Rigid
PVC rain water pipes conforming to IS : 13592 Type A
including jointing with seal ring conforming to IS :
5382 leaving 10 mm gap for thermal expansion.
(i) Single socketed pipes :
Providing and fixing on wall face unplasticised - PVC
moulded fittings/ accessories for unplasticised Rigid
PVC rain water pipes conforming to IS : 13592 Type A
including jointing with seal ring conforming to IS :
5382 leaving 10 mm gap for thermal expansion.
A Single pushfit Coupler :
a) 110 mm
Providing and fixing unplasticised -PVC pipe clips of
approved design to unplasticised - PVC rain water
pipes by means of 50x50x50mm hard wood plugs,
screwed with M.S. screws of required length including
cutting brick work and fixing in cement mortar 1:4 (1
cement : 4 coarse sand) and making good the wall etc.
complete.
b) 110 mm
3520.38
m2
3520.38
m2
1012.00
m
360
Nos
360
Nos
8
BILL OF QUANTITIES (BOQ)
41
42
43
44
45
46
47
21.76
21.79
21.81
21.61
21.92
21.99
17.01
Applying one coat of distemper primer of approved
brand and manufacture on wall surface.
22031.93
m2
Distempering with 1st quality acrylic washable
distemper of approved brand and manufacture and of
required shade and colour to give an even shade on
new work (two or more coats).
22031.93
m2
Finishing walls with water proofing cement paint of
approved brand and manufacture and of required
shade on new work (three or more coats) to give an even
shade.
7403.95
m2
Applying priming coat with ready mixed primer of
approved brand and manufacture on wood work and
plywood complete.
a) Ready mix pink/grey primer.
437.22
m2
Painting with synthetic enamel paint of approved
brand and manufacture in all shade on new work (two
or more coats).
a) General quality
437.22
m2
89.70
m2
36
Nos
Varnishing with copal varnish of approved brand and
manufacture on new work (two or more coats) of glue
sizing over an under coat of floating varnish.
Providing and fixing water closet squatting pan
(Indian type W.C. pan) with 100 mm Sand Cast Iron P
or S trap, 10 litre low level white P.V.C. flushing
cistern, including flush pipe, manually controlled
device (handle lever) conforming to IS: 7231, with all
fittings and fixtures complete, including cutting and
making good the walls and floors wherever required:
b) White Vitreous china Orissa pattern W.C. pan of
size 530x410 mm with integral type foot rests
9
BILL OF QUANTITIES (BOQ)
48
49
50
51
17.04
17.19
17.27
17.32
Providing and fixing vitreous china pedestal type
water closet (EWC Constellation 'P' / 'S') including Seat
Cover Constellation and lid with C.P brass hinges and
rubber buffers, Cistern with Lid Constellation and
Fittings (Water Saver) and C.I / R.S brackets, 40 mm
porcelain enamelled flush bend, overflow arrangement
with specials of standard make and mosquito proof
coupling of approved design complete including
painting of fittings and brackets, cutting and making
good the walls and floors wherever required.
17
Nos
Providing and fixing white vitreous china flat back
half stall urinal of size 580 x380 x350mm with white
PVC automatic flushing cistern, with fittings, standard
size CP. brassflush pipe, spreaders with unions and
clamps (all in CP. brass) with waste fitting as per IS:
2556, C.I. trap with outlet grating and other couplings
in CP. brass, including painting of fittings and cutting
and making good the walls and floors wherever
required:
(a) Single half stall urinal with 5 litre PVC. automatic
flushing cistern
24
Nos
Providing and fixing wash basin compact with C.I.
brackets, 15 mm CP. brass pillar taps, 32mm CP. brass
waste of standard pattern, including painting of
fittings and brackets, cutting and making good the
walls wherever required:
i) White
(b)White Vitreous China Wash basin size 450x300 mm
with a single 15 mm CP. brass
38
Nos
Providing and fixing vitreous china tall pedestal for
wash basin completely recessed at the back for the
reception of pipes and fittings.
18
Nos
10
BILL OF QUANTITIES (BOQ)
52
53
17.38
17.43
54
17.45
55
17.46
56
57
58
17.47
17.48
17.51
Providing and fixing mirror of superior glass (of
approved quality) and of required required shape and
size with plastic moulded frame of approved make and
shade with 6 mm thick hard board backing:
Rectangular shape500x400 mm
36
Nos
36
Nos
50
Nos
34
Nos
792
Nos
Providing and fixing on wall face SWRPVC soil, waste
and vent pipes including jointing with rubber
lubricant/cement solvent complete.
a) 100mm dia.
1848.00
rm
Providing and fixing SWRPVC bend with access door
of required degree including jointing with rubber
lubricant/cement solvent complete.
a) 110mm dia SWRPVC bend with access door.
160
Nos
Providing and fixing C.P. brass towel rail with two
C.P. brass brackets to wooden cleats with C.P. brass
screws.
b) 600x20mm size.
Providing and fixing toilet paper holder.
b) C.P. brass toilet paper holder of standard size.
Providing and fixing liquid soap container with C.P
brass lid and brackets fixed to wooden cleats with the
same materials etc complete.
b) Soap dish chromium plated with brackets.
Providing and fixing M.S holder bat clamps of
approved design to sanitary / drainage pipe
embedded in and including cement concrete block
10x10x10cm of 1:2:4 mix (1cement : 2coarse sand :
4aggregate 20mm nominal size) including cost of
cutting holes and making good the wall etc. complete.
a) 100mm dia.
11
BILL OF QUANTITIES (BOQ)
59
60
61
62
63
64
65
66
17.54
17.56
17.57
17.58
17.59
18.02
18.16
18.19
Providing and fixing SWRPVC plain junction of
required degree with access door (Y-junction)
including jointing with rubber lubricant/cement
solvent.
a) 110 mm Y-junction of SWRPVC with access door.
192
Nos
175
Nos
20
Nos
Providing and fixing W.C. connection bend type
(siphon) (SWRPVC) including jointing with rubber
lubricant/ solvent cement. - Siphon
138
Nos
Providing and fixing 125/110 S-trap SWRPVC
including joining with rubber lubricant/ solvent
cement. - 125/110 S-trap (SWRPVC)
136
Nos
20000.00
Lits
Providing and fixing chromium plated brass bib cock
of approved quality.
a) 15mm nominal bore
87
Nos
Providing and fixing chromium plated brass stop cock
of approved quality.
b) 20mm nominal bore
24
Nos
Providing and fixing SWRPVC socket including
jointing with rubber lubricant/cement solvent.
a) 110mm dia socket.
Providing and fixing ventilation cowl including
jointing with rubber lubricant/cement solvent
complete.
110mm SWRPVC vent cowl
a)
Providing and fixing on terrace (at all floor levels)
Polyethylene storage tank of approved brand and
manufacture with cover and mosquito proof coupling
and suitable locking arrangement and making
nescessary connections for inlet, outlet and overflow
pipes but without the cost for base support.
12
BILL OF QUANTITIES (BOQ)
67
68
69
73
18.32
18.33
18.34
2.23
Providing and fixing CPVC pipes complete with CPVC
fitting for water supply including clamps at one metre
spacing, cutting and making good the walls etc.
(internal works) -Exposed on walls.
a) 15mm dia. nominal bore
516.00
rm
Extra for concealed in brick and RCC works by making
chases upto 7.5x7.5cm in walls and making good the
same after housing pipes, etc.
a) 15mm dia. nominal bore
516.00
rm
Providing and fixing CPVC pipes complete with CPVC
fitting for water supply, including trenching and
refilling etc. (external work).
c) 25mm dia nominal bore
355.00
rm
Diluting and injecting chemical emulsion for post
constructional anti termite treatment with
Chlorpyriphos/Lindane emulsifiable chemical 20%
with 1% concentration.
b) Along external wall below concrete or masonry
apron using chemical emulsion @ 2.25 litres per linear
metre including drilling and plugging holes etc
complete
1127.30
rm
c) Treatment of soil under existing floor using
chemical emulsion @ 1 litre per hole, 300mm apart
including drilling 12mm diameter holes and plugging
with cement mortar 1:2 (1 cement : 2 coarse sand) to
match the existing floor
2256.02
m2
13