2013-2014 Associate in Applied Technology Degree Worksheet
Instrumentation/Control Automation
Name _______________________________ SID ______________ Date _________ Advisor ______________________
Mechatronics technology is a complex interdisciplinary field that combines the study of mechanics, electronics, automation and
computers. Clark College's Mechatronics program proposal is designed with two certificate tracks, both of which lead to a
corresponding AAT degree. Each of the certificate and degree tracks provides multiple stop out and entry points to accommodate
various workforce demands.
Program Distribution
General Education Requirements - 15 credits
Courses listed below must be completed with a “C” or better.
• Communication Skills — 5 credits
Courses listed below must be completed with a “C” or better.
MTX 101 DC Fundamentals
3
MTX 102 AC Fundamentals
3
MTX 103 Basic Measurement Tools
2
MTX 105 Basic Hydraulics
2
MTX 107 Basic Pneumatics
2
MTX 110 Electric Motor Control 1
4
MTX 113 Electical Power Distribution
2
MTX 117 Mechatronics 1
2
MTX 121 Semiconductors I
3
MTX 123 Pick and Place Robot
3
MTX 125 Servo Robot
3
MTX 130 Programmable Logic Controllers 1
4
MTX 135 Industrial Electical Wiring
3
MTX 165 Electric Motor Control 2
4
MTX 205 Flow Process Control
5
MTX 207 Thermal Process Control
5
MTX 210 Electro-Fluid Power
4
MTX 216 Mechatronics 2
5
MTX 220 Workplace Origanization and Practice
2
MTX 223 Work Teams and Poject Design
3
MTX 225 Speed Control Systems
2
Clark College, and in all courses applied to the degree. Thirty
(30) credits minimum must be completed at Clark College to
meet Academic Residency.
MTX 250 Adv. Programmable Logic Controllers
4
MTX 270 Capstone
3
Courses do not always follow numbering sequence, please
refer to the College Catalog for prerequisites and for info on
quarterly class offerings refer to the Annual Class Planner.
MTX 285 Project Mgmt. & Lean Manufacturing
2
MTX 295 Organizational Entrepreneurship
3
ENGL 135 Intro to Tech Writing is recommended
• Computational Skills — 5 credits
• Human Relations — 5 credits
CMST& 230 Small Group Communication is recommended
TOTAL
NEEDED
0
Advising Notes & Degree Requirements
• This worksheet is only for advising purposes. Official approval
of credits for degree completion is subject to approval from
the Credential Evaluations Office: credeval@clark.edu
• Consult with an academic advisor on a regular basis for degree
completion planning. Contact the Advising Center to locate an
academic advisor. Call (360) 992-2345 or visit us online at:
www.clark.edu/advising
• Must earn a cumulative GPA of 2.00 in all coursework taken at
•
Major Area Requirements - 78 credits
= course that is currently in-progress
TOTAL CREDITS REQUIRED: 93
NEEDS:
TOTAL
0
NEEDED
0
Student Signature:
Advisor Signature:
Revised 08/05/13
Unofficial Evaluation Given to Student
EPC: 6331
Associate in Applied Technology (AAT)
NOTES:
dŚĞƐƐŽĐŝĂƚĞŝŶƉƉůŝĞĚdĞĐŚŶŽůŽŐLJĚĞŐƌĞĞŝƐĚĞƐŝŐŶĞĚĨŽƌƐƚƵĚĞŶƚƐǁŚŽǁŝƐŚƚŽĐŽŵƉůĞƚĞĂƉƌŽŐƌĂŵ
ǁŝƚŚĂƐƉĞĐŝĨŝĐƚĞĐŚŶŝĐĂůĐĂƌĞĞƌŽďũĞĐƚŝǀĞ͘^ƚƵĚĞŶƚƐĂƌĞƌĞƋƵŝƌĞĚƚŽĐŽŵƉůĞƚĞĂŵŝŶŝŵƵŵŽĨƚŚŝƌƚLJ;ϯϬͿ
ĐƌĞĚŝƚƐĂƚůĂƌŬŽůůĞŐĞƚŽŵĞĞƚĐĂĚĞŵŝĐZĞƐŝĚĞŶĐLJƌĞƋƵŝƌĞŵĞŶƚ͘^ƚƵĚĞŶƚƐĂƌĞƌĞƋƵŝƌĞĚƚŽŵĂŝŶƚĂŝŶ
ĂĐƵŵƵůĂƚŝǀĞ'WŽĨϮ͘ϬϬƚŽƌĞĐĞŝǀĞƚŚŝƐĚĞŐƌĞĞ͘
General Education Requirements Note: Some specific requirements of a program may also meet the General Education requirements. A total of fifteen (15) credits between the three subject areas is required. You may take three (3) to five
(5) credits from the courses listed below in each area of Communication Skills, Computational Skills and
Human Relation, but the combined total needs to equal fifteen (15) credits.
Communication Skills [C] – 5 credits Select a minimum of five (5) credits from the list below:
• BTEC 107
• ENGL& 101 or 135
• ENGL 212 or BUS 211
• ENGL& 235
Computational Skills [CP] – 5 credits Complete five (5) credits from the list below:
• Math – MATH 103, 105, 111, MATH& 107or any course for which one of these is a prerequisite
• Computer Technology – CTEC 100, 101, 121
Human Relations [HR] – 5 credits Complete five (5) credits from the list below:
• Communication Studies – CMST 216, CMST&210, 230
• Business Administration – BUS& 101
• Human Development – HDEV 105, 123, 155, 186, 195, 198, 200
• Management – MGMT 101, 106, 110, 112, 120, 122, 125, 128, 132
• Psychology – PSYC&100
• Sociology – SOC& 101
• Women’s Studies – WS101
Specific Requirements in an Occupational Field Students must complete the courses listed in their career plan, plus electives as needed to meet the
ninety (90) credit requirement. All Associate in Applied Technology degree programs require at least seventy-five (75) credits minimum of major-related requirements.
Short-Term Plan:
Summer
Summer