2015-2016 Associate in Applied Technology Degree Worksheet
Instrumentation/Control Automation
Name _______________________________ SID ______________ Date _________ Advisor ______________________
Mechatronics Technology is a growing career field that deals with the integration of mechanical and electronic components managed
by control systems. Mechatronics technicians troubleshoot, maintain and repair mechanical equipment controlled by electrical,
electronic and computer systems. These types of systems are increasingly used in a wide variety of manufacturing and industrial
settings.
Program Distribution
General Education Requirements - 15 credits
Courses listed below must be completed with a “C” or better.
• Communication Skills — 5 credits
PTWR 135 Intro to Applied Tech Writing is recommended
• Computational Skills — 5 credits
• Human Relations — 5 credits
CMST& 230 Small Group Communication is recommended
TOTAL
NEEDED
0
Advising Notes & Degree Requirements
• This worksheet is only for advising purposes. Official approval
of credits for degree completion is subject to approval from
the Credential Evaluations Office: credeval@clark.edu
• Consult with an academic advisor on a regular basis for degree
completion planning. Contact the Advising Center to locate an
academic advisor. Call (360) 992-2345 or visit us online at:
www.clark.edu/advising
Courses listed below must be completed with a “C” or better.
MTX 100 Industrial Safety
1
MTX 101 DC Fundamentals
3
MTX 102 AC Fundamentals
3
MTX 103 Basic Measurement Tools
2
MTX 105 Basic Hydraulics
2
MTX 107 Basic Pneumatics
2
MTX 110 Electric Motor Control 1
4
MTX 113 Electical Power Distribution
2
MTX 117 Mechatronics 1
2
MTX 121 Semiconductors I
3
MTX 123 Pick and Place Robot
3
MTX 125 Servo Robot
3
MTX 130 Programmable Logic Controllers 1
4
MTX 135 Industrial Electrical Wiring
3
MTX 165 Electric Motor Control 2
4
MTX 205 Flow Process Control
5
MTX 207 Thermal Process Control
5
MTX 210 Electro-Fluid Power
4
MTX 216 Mechatronics 2
5
MTX 220 Workplace Organization and Practices
2
MTX 223 Work Teams and Poject Design
3
Clark College, and in all courses applied to the degree. Thirty
(30) credits minimum must be completed at Clark College to
meet Academic Residency.
MTX 225 Speed Control Systems
2
MTX 250 Adv. Programmable Logic Controllers
4
Courses do not always follow numbering sequence, please
refer to the College Catalog for prerequisites and for info on
quarterly class offerings refer to the Annual Class Planner.
MTX 270 Capstone
3
MTX 285 Project Mgmt & Lean Manufacturing
2
MTX 295 Organizational Entrepreneurship
3
• Must earn a cumulative GPA of 2.00 in all coursework taken at
•
Major Area Requirements - 79 credits
= course that is currently in-progress
TOTAL CREDITS REQUIRED: 94
NEEDS:
TOTAL
0
NEEDED
0
Student Signature:
Advisor Signature:
Revised 07/15/15
Unofficial Evaluation Given to Student
EPC: 6332
Associate in Applied Technology (AAT)
2015-2016
NOTES:
dŚĞƐƐŽĐŝĂƚĞŝŶƉƉůŝĞĚdĞĐŚŶŽůŽŐLJĚĞŐƌĞĞŝƐĚĞƐŝŐŶĞĚĨŽƌƐƚƵĚĞŶƚƐǁŚŽǁŝƐŚƚŽĐŽŵƉůĞƚĞĂƉƌŽŐƌĂŵ
ǁŝƚŚĂƐƉĞĐŝĨŝĐƚĞĐŚŶŝĐĂůĐĂƌĞĞƌŽďũĞĐƚŝǀĞ͘^ƚƵĚĞŶƚƐĂƌĞƌĞƋƵŝƌĞĚƚŽĐŽŵƉůĞƚĞĂŵŝŶŝŵƵŵŽĨƚŚŝƌƚLJ;ϯϬͿ
ĐƌĞĚŝƚƐĂƚůĂƌŬŽůůĞŐĞƚŽŵĞĞƚthe ĐĂĚĞŵŝĐZĞƐŝĚĞŶĐLJƌĞƋƵŝƌĞŵĞŶƚ͘^ƚƵĚĞŶƚƐĂƌĞƌĞƋƵŝƌĞĚƚŽ
ŵĂŝŶƚĂŝŶĂĐƵŵƵůĂƚŝǀĞ'WŽĨϮ͘ϬϬƚŽƌĞĐĞŝǀĞƚŚŝƐĚĞŐƌĞĞ͘
General Education Requirements Note: Some specific requirements of a program may also meet the General Education Requirements. A total of fifteen (15) credits between the three subject areas is required. You may take three (3) to five
(5) credits from the courses listed below in each area of Communication Skills, Computational Skills,
and Human Relations, but the combined total needs to equal fifteen (15) credits.
Communication Skills [C] – 5 credits
Complete five (5) credits from the list below:
• BTEC 107
• ENGL& 101 or 135
• ENGL 212 or BUS 211
• ENGL& 235
• PTWR 135
Computational Skills [CP] – 5 credits
Complete five (5) credits from the list below:
• Business – BUS 102
• Business Technology Medical Office – BMED 103, 105
• Math – MATH 103, 105, 111, MATH& 107 or any course for which one of these is a prerequisite
• Computer Technology – CTEC 121
• Professional Technical Computational Skills – PTCS 110
Human Relations [HR] – 5 credits
Complete five (5) credits from the list below:
• Addiction Counselor Education – ACED 101, 201
• Business Medical Office – BMED 166, 225, 226
• Business Technology – BTEC 140, 141, 143, 145, 148
• College Preparation – COLL 101
• Communication Studies – CMST& 210, 230
• Education – EDUC& 150
• Human Development – HDEV 105, 123, 155, 175, 186, 195, 198, 200
• Management – BUS& 101; MGMT 101, 106, 110, 112, 120, 122, 125, 128, 132
• Psychology – PSYC& 100, 200; PSYC 203
• Sociology – SOC& 101, 201; SOC 121, 131, 220
• Women’s Studies – WS 101
Short-Term Plan:
Summer
Summer
Specific Requirements in an Occupational Field
Students must complete the courses listed in their career plan, plus
electives as needed to meet the ninety (90) credit requirement. All
Associate in Applied Technology degree programs require at least
seventy-five (75) credits minimum of major-related requirements.