2011-2012 Certificate of Proficiency Worksheet
Machining Technology
1DPHBBBBBBBBBBBBBBBBBBBBBBBBBBBB6,'BBBBBBBBBBBBB'DWHBBBBBBBBBBB$GYLVRUBBBBBBBBBBBBBBBBBBBBBB The Certificate of Proficiency is designed for students who wish to receive specialized occupational training for a specific career objective. See
college catalog for academic residency requirements. Students are required to maintain a cumulative grade point average of 2.00 to receive this
certificate. Any course specified below must be completed with a grade of a “C” or better to satisfy requirement. Plan ahead as some courses are not
taught every quarter.
Program Distribution
Major Area Requirements
General Education Requirements
Note: Some General Education Requirements may be met by the specific
major area requirements of the program. Check individual course
descriptions in the catalog for more detailed information.
• Communication Skills — 3 credits
&RPSOHWH
Needed
..................................................................
Prerequisite: DVED 094 or recommending placement score for
ENGL 097
• Computational Skills — 3-5 credits
&RPSOHWH
Needed
MATHI 085 (required).....................................
Prerequisite: Grade of “C ”or better in DVED 023 Mathematics or
recommending Placement Score
• Human Relations — 3 credits
..................................................................
..................................................................
&RPSOHWH
Needed
Courses listed below are to be completed with a “C” or better.
MACH 111
Basic General Machine Proc.
5
MACH 112
Basic Engine Lathe Proc. I
5
MACH 113
Basic Vertical Milling Proc. I
5
MACH 121
Basic Surface Grinder Proc. I
5
MACH 122
Basic Engine Lathe Proc. II
5
MACH 123
Basic Vertical Milling Proc. II
5
MACH 131
Basic Surface Grinder
5
MACH 132
Basic Engine Lathe Proc. III
5
MACH 133
Basic Vertical Milling Proc. III
5
MACH 211
Adv. Surface Grinder Proc. III
5
MACH 212
Adv. Engine Lathe Proc. IV
5
MACH 213
Adv. CNC Milling Setup & Oper.
5
MACH 221
Surface Grinder & Proc. II
5
MACH 222
CNC Lathe Setup & Operation
5
dŚĞŵĂĐŚŝŶŝƐƚΖƐĐƌĂĨƚŝƐďĂƐŝĐƚŽĂůůŵĞƌŝĐĂŶŝŶĚƵƐƚƌŝĂůƉƌŽĚƵĐƚŝŽŶ͘
/ƚŝƐƚŚĞŵĂĐŚŝŶŝƐƚΖƐƚĂƐŬƚŽŝŶƚĞƌƉƌĞƚƚŚĞĞŶŐŝŶĞĞƌΖƐĚƌĂǁŝŶŐƐŝŶ
MACH 223
Adv. CNC Mill/MasterCAM
5
ŽƌĚĞƌƚŽĨĂďƌŝĐĂƚĞŶĞǁŵĂĐŚŝŶĞƐĂŶĚƉƌŽĚƵĐƚƐ͘
MACH 231
Adv. EDM Proc.
5
Adv. CNC Lathe Programming
5
DĂĐŚŝŶŝƐƚƐŽƉĞƌĂƚĞǀĂƌŝŽƵƐƚLJƉĞƐŽĨŵĂƚĞƌŝĂůͲƌĞŵŽǀŝŶŐĞƋƵŝƉŵĞŶƚ MACH 232
ƐƵĐŚĂƐůĂƚŚĞƐ͕ŵŝůůŝŶŐŵĂĐŚŝŶĞƐ͕ŐƌŝŶĚĞƌƐ͕ĂŶĚĐŽŵƉƵƚĞƌŝnjĞĚ
MACH 233
Adv. Mill. 3D Prog. & Mach.
5
ŶƵŵĞƌŝĐĂůĐŽŶƚƌŽů;EͿŵĂĐŚŝŶĞƐ͘^ŽŵĞŵĂĐŚŝŶŝƐƚƐƐƉĞĐŝĂůŝnjĞŝŶ
Related Required Classes
ƚŚĞŽƉĞƌĂƚŝŽŶŽĨŽŶĞƚLJƉĞŽĨŵĂĐŚŝŶĞǁŚŝůĞŽƚŚĞƌƐǁŽƌŬŝŶĂƐŚŽƉ
ǁŚĞƌĞƚŚĞLJĂƌĞƌĞƋƵŝƌĞĚƚŽƉĞƌĨŽƌŵĞƋƵĂůůLJǁĞůůŽŶƐĞǀĞƌĂů
MACH 106
Mech. Blueprint Reading
4
ĚŝĨĨĞƌĞŶƚŵĂĐŚŝŶĞƐ͘
MACH 235
Elem. Metallurgy
2
ůĂƌŬŽůůĞŐĞΖƐƉƌŽŐƌĂŵŽĨĨĞƌƐŝŶƐƚƌƵĐƚŝŽŶŝŶŶƵŵĞƌŽƵƐŵĂĐŚŝŶĞ
MACH 236
Elem. Metallurgy Lab
2
ƉƌŽĐĞƐƐĞƐŝŶĐůƵĚŝŶŐƚŚĞƐĞƚͲƵƉĂŶĚŽƉĞƌĂƚŝŽŶŽĨƚŚĞĞŶŐŝŶĞůĂƚŚĞ͕
MARs Complete
MARs Needed
ƐƵƌĨĂĐĞŐƌŝŶĚĞƌƐ͕ĐLJůŝŶĚƌŝĐĂůŐƌŝŶĚĞƌ͕ŚŽƌŝnjŽŶƚĂůĂŶĚǀĞƌƚŝĐĂůŵŝůů͕
0
EůĂƚŚĞƐ͕DĂŶĚŵŝůůŝŶŐŵĂĐŚŝŶĞƐ͘
ůůƐŚŽƉƚŚĞŽƌLJƐƵďũĞĐƚƐŚĂǀĞĂĚŝƌĞĐƚďĞĂƌŝŶŐŽŶƚŚĞƐƚƵĚĞŶƚΖƐƐŬŝůů͕
ƐĂĨĞƚLJ͕ĂŶĚĂƚƚŝƚƵĚĞ͘/ŶĂĚĚŝƚŝŽŶƚŽƐŚŽƉƚŚĞŽƌLJĂŶĚƉƌĂĐƚŝĐĞ͕ƚŚĞ
ƐƚƵĚĞŶƚƐƚƵĚŝĞƐŵĂƚŚ͕ďůƵĞƉƌŝŶƚƌĞĂĚŝŶŐ͕ŵĞƚĂůůƵƌŐLJ͕ƐĂĨĞƚLJ͕ĂŶĚ
0
TOTAL CREDITS REQUIRED: 109
NEEDS: _________
ĐŽŵƉƵƚĞƌͲĂŝĚĞĚŵĂŶƵĨĂĐƚƵƌŝŶŐ;DͿƉƌŽŐƌĂŵŵŝŶŐ͘
DĂƐƚĞƌDƉƌŽŐƌĂŵŵŝŶŐĐůĂƐƐĞƐƚĞĂĐŚďĂƐŝĐDƉƌŽŐƌĂŵŵŝŶŐ STUDENT SIGNATURE:________________________________
ĨŽƌŵŝůůƐ͕ůĂƚŚĞ͕D͕ĞƚĐ͘dŚĞďĂƐŝĐEĐůĂƐƐŝŶǀŽůǀĞƐǁƌŝƚŝŶŐ
ƉƌŽŐƌĂŵƐĂŶĚůĞĂƌŶŝŶŐƚŽƐĂĨĞůLJŽƉĞƌĂƚĞƚŚĞ,^EŵŝůůƐ͘
ADVISOR SIGNATURE:________________________________
REVISED: 08/29/2011
Unofficial Evaluation Given to Student
Degree & Certificate Intent
The career and technical education degrees and
certificates are designed for students interested in
gaining specific technical career skills. Students focus
on completing program specific coursework, balanced
by minimal general education courses. Although the
Associate in Applied Science and the Associate in
Applied Technology degree programs are not designed
to guarantee transfer to a senior institution, some
institutions may accept technical coursework for
students in certain areas of study. Students should
contact an advisor and/or the senior institution for
additional information.
General Education Requirements
Note: Some specific requirements of the program may
be met by general education requirements.
Complete a minimum of three (3) credits from:
Complete a minimum of three (3) credits from the
following courses:
ENGL& 101 or 135
ENGL& 102
ENGL 103
ENGL& 235
ENGL 212 or BUS 211
PTWR 094
PTWR 095
PTWR 096
PTWR 097
PTWR 098
PTWR 099
Note: Pharmacy Technician students may meet the
Communication Skills requirement by achieving one of
the following:
1. Completion of ENGL 098 and placement
in college level reading.
2. COMPASS test score of 78 on Writing
skills AND completion of READ 087.
3. COMPASS test score of 78 on Writing
skills AND a score of 74 on Reading skills.
Computational Skills-3 credits
Complete a minimum of three (3) credits from:
• Any Mathematics
MATH 096
Science & Engineering (CSE)
121, 222, 223, 224, CS& 131, CS& 141; or
any CTEC course except CTEC 102, 103,
104, 105, 180, 181, 200, or 281
• Chemistry (CHEM) 050
• Business Technology (BTEC) 136
• Pharmacy (PHAR) 110
• Health Occupation (HEOC) 011
Only meets the computational skills
requirement for Medical Assistant
• Business Technology (BTEC) 040
Only meets the computational skills
requirement for Health Information
Assistant, Medical Billing/Coding
Specialist, and Medical
Transcriptionist
• Environmental Science (ENVS) 135
Human Relations – 3 credits
Communication Skills – 3 credits
BTEC 087
BTEC 107
ENGL 097
ENGL 098
ENGL 099
• Computer
(MATH) course, except
• Communication
Studies (CMST/CMST&)
210, 212, or 230
• Any Human Development (HDEV),
Psychology (PSYC), or Sociology (SOC)
course
• Addiction Counselor Education (ACED)
201
• Business Technology (BTEC) 141, 143,
145, 147, 166, 225, or 226
Note: Specific Requirements in an Occupational Field
Refer to the prescribed curriculum in the catalog for
specific coursework.
Note: Appropriate course substitutions may be made
at the recommendation of the signature program
advisor, division chair or unit dean.
Notes: