Slide 1

You will need two pieces of computer
paper and a small piece of thick
paper and your final paper.
1. Make 2 3inch x 3 inch squares
on computer paper.
2. Change the left side
3. Cut it out
4. Trace it on the left and right side
of the empty box.
5. Cut it out
6. Trace the cut-out 2 times on a
new sheet of computer paper
7. Change the top or bottom but
think about how it will interact
with the other side
8. Cut it out
9. Trace the new top and bottom
10. Then cut it out
11. Trace it on a thick piece of
paper to create your stencil.
12. Turn it until you see something
that can be made into an image
I found a bird