Complex embedded solution for Russia & ROE L. Pavel, Elatec, April 15th, 2009 Page: 1 Complex embedded solution Why you should use ? embedded PC board Page: 2 Complex embedded solution Why embedded board Page: 3 Standard PC board: Embedded PC board: Specified for home and office usage Specified for more exciting applications • Frequent changes in specifikation Stable technical specifikation • Never ending re-design of application necessary No changes in design necessary Availability only some months Long term availabe (min. 3-5 years) No technical support Full technical support, BIOS adjustment etc No direct connection to display panel Direct RGB/LVDS, two independent displays Hardware optimized for office application Hardware modified for concrete applications Complex embedded solution Why embedded board - Reliability Standard PC board: Embedded PC board: Commercial grade components used Target life time about 3 years Chip degrade significantly after 1 - 2 years Industrial grade components used Target life time about 8 years Chip long-term stable Components with rotating parts used Rotating parts create potential problem Fan for coooling used HD for data used No components with rotating parts used No rotating parts – less problems Passive cooling – no fan Compact flash or SSD Embedded PC is more expensive but economize your servis costs Page: 4 Complex embedded solution COMPLEX EMBEDDED SOLUTION Page: 5 Complex embedded solution CONSULTANCY We understand your applications We offer complex products Let us recommend you a solution Let us work for you Give us your needs … … we provide concrete solution Page: 6 Complex embedded solution EMBEDDED COMPUTING Page: 7 Single board computer (SBC) Box PC Panel PC Complex embedded solution Embedded computing Page: 8 Single board computer, box PC, panel PC Some products with wide temperature range ARM based mini single board computer Wide temperature range Complex embedded solution Embedded computing - Boards Module + base board COM express 125 x 95 mm XTX 114 x 96 mm ETX 3.0 114 x 96 mm PC/104 Size 96 x 90 mm Industry standard Page: 9 Complex embedded solution Embedded computing - Boards 3,5“ Single Board Computer (SBC) Size 146 x 101 mm Few std. connectors (LAN, VGA, COM), rest via 5,25“Single Board Computer (SBC) Size 203 x 146 mm More std. connectors (PCI, DDR …) Page: 10 Complex embedded solution Embedded computing - Boards Long Life Motherboard Mini ITX – 170 x 170 mm Micro ATX – 243 x 243 mm ATX – 304 x 243 mm Long life stable and available PCI board - slot computing Full - Size 338 x 122 mm Half - Size 185 x 122 mm Page: 11 Complex embedded solution Embedded computing - Boards ARM based mini single board computer (Micro9) ARM920T@200MHz up to 128MB SDRAM, 4 kB EEPROM, 2 x 16kB cash LCD/TFT/ CRT interface, max. 1280 x 768 Support 4/5/7/8 – wire resistive touchscreen OS Windows CE or Linux Wide operating temperature range Micro9-slim: 42,5 x 54 mm Micro9-mid: same as slim but with CAN, SPI, IC, AC97 etc 85 x 54 mm Applications: small low power instruments with OS Page: 12 Complex embedded solution Embedded computing – Box PC Box PC Compact form Fanless system Complex shipment from one hand Wide temperature range Customization Page: 13 Complex embedded solution Embedded computing – Box PC Mobile DVR with 4/8 video inputs (Apollo) NTSC, PAL Video compression MPEG-4 Anti-vibration, anti-shock, for using in cars Fanless design Operating temperatur -25 to 55 °C 19“ 1U compact computer (Scorpio) Intel Core 2Duo/Pentium D/ Pentium 4 up to 2.13 GHz Up to 4GB Dual channel DDRII 6x Ethernet 1000, 2x USB, 4x SATA, 1x CF, 1x mini PCI TPM 1.2 security Chip on board (optional) 2 x 16 char LCD display in front Page: 14 Complex embedded solution Embedded computing – Box PC Industry-temperature box (RuggCore) Intel Core™2 Duo 2.16GHz / Intel Celeron M/ AMD Scalable product Anti-Vibration: 5 grms / 5~500Hz / random operation Anti-Shock: 50 g peak acceleration (11 ms duration) Fanless design Operating temperature -20 to 60°C Multi-display output Application: factory automation, video server etc HDMI Page: 15 DVI-I LVDS CF Complex embedded solution Embedded computing – Box PC HMI-box PC (Pandora) Isolated I/O Ports and CAN 2.0B Port AMD LX900 600MHz or Intel ATOM N270 1.6GHz Built-in alphanumeric LCD Module Fanless Applications: control unit for automation, vehicles, transportation , tester equipment etc Box PC (Phoenix – E200) Socket for low power Pentium M 1x VGA/LCD Easy HD instalation Smart Fan design 1x Earphone, 1 x Mic Page: 16 Complex embedded solution Embedded computing – Panel PC Panel PC Complete PC with monitor and touch screen Size 5,7“ – 10,4“ – 15“ – 17“ Fanless system Wide temperature range Sunlight readable models Options: Wi-FI, GPRS, GPS, OS Page: 17 Complex embedded solution Embedded computing – Panel PC 5,7“ Panel PC (Leo-500) Complete PC with monitor and touch screen AMD LX900 600MHz 32-bit x86 CPU Core 640 x 480 display with touch panel and 4 programmable keys Fanless cooling system Isolated I/O ports System data Recovery technology support Options: Sunlight readable, CAN, RFID reader 10,4“ Panel PC (Leo-1010) Complete PC with monitor and touch screen Several chipsets and microprocessors 1024 x 768 display with 5 wire touch panel IP 65 front panel Page: 18 Complex embedded solution Embedded computing – Panel PC 15” medical touch panel PC (LEO 1500) Mobile, modular and intelligent interactive terminal For healthcare, entertainment and interactive information Microphone and CCD camera for communication Smart Card Reader for security and billing applications Long-life battery 7200 mAh, wireless connections Certification UL/UN 60601-1 10,4“ Rugged Tablet PC (Hercules) Anti-Shock & Anti-vibration Sunlight readable, Option: touch screen Input: typical PC inputs Temperature range: -40 to+ 60°C Application: military, aerospace etc Page: 19 Complex embedded solution Embedded computing – Panel PC 15”- 17” – 19” touch panel PC (Navpixel) Sunlight readable, 1000 nits Intel Core 2Duo 2.13 GHz Dual Independent Display on one screen COM2 is configurable to RS232/RS422/RS485 Power supply: AT and ATX mode IP65 Compliant Aluminum Front Bezel Design Dual Independent LAN Ports Support In HMI application environments, many system integrator prefer dual independent LAN to allocate factory zone and data storage zone to reduce the network collision and crash, or virus infection. Page: 20 Complex embedded solution IMAGING Page: 21 Display panel Monitor, open frame Touch screen AD board Invertor, optical filter Complex embedded solution Imaging – Display panel Monochrom display Resolution 320 x 240 Industrial temperature range WLED or CCFL backlight Grey/ Green/ Blue mode Positive/negative image Color display (TFT panel) 2,5“ to 22“ Operating temperature -30 to + 80°C Brightness 400 – 2.200 cd/ m2 Sunlight readable WLED or CCFL backlight RGB/ LVDS interface Long-term and stable available Page: 22 Complex embedded solution Imaging – Display panel Industry designed TFT by Sharp Strong2 technology by Sharp Display designed and specified for industry applications Shocks and vibrations are absorbed extremly well Backlight bright about 400 - 500 nits Wide viewing angle Operating temperature -30 to + 80°C High bright and sunlight readable Brightness about 1000 nits Contrast 700 – 1200:1 Applications: outdoor, military, marine, petrol station etc Page: 23 Complex embedded solution Imaging – Display panel Briliant in direct sunshine, low power Blanview exclusive technology Excellent readable in sunshine A little chromacity shift only Well readable with backlight off Low power compared to std display Ideal for hand held devices Size 2,7“ - 3,5“ - 4.3“ – 5,7“ – 6,5“ Standard display in direct sunshine Strong chromacity shift In sunshine difficulty readable High power consumtion (backlight) Page: 24 Complex embedded solution Imaging – Display panel/options Option Lamination of readability improving foils Lamination of touch screen – reduce reflections, optimize readability in sunlight conditions Lamination of antivandal front glass Optical filter Antireflex, antiglare IR radiation reducing filter EMI reducing filter Page: 25 Complex embedded solution Imaging – Sign panel and monitor Sign panel Size 32“ – 108“ Landscape/ portrait TFT panel or complete monitor 450 – 3.500 cd/ m2 WLED or CCFL backlight Life time typ. 60.000 hours High contrast Backlight brightness customization Proffesional sign monitor Basic features same as sign panel Designed for 24 hours operation Multi-screen capability up to 5x5 screens Image reversing, PinP /PbyP function Page: 26 Coming in 2009: LAN & HDMI interface Complex embedded solution Imaging – Sign wall Litemax solution Litille34 product Invisible frame of module Sunlight readable 1000 nits Modular, scalable Typical solution Page: 27 Complex embedded solution Imaging – Touch screen Resisitive Size 2,2“ to 19“ 4 or 5 wire USB/RS232 controler board Cheapest solution Capacitive Size 6,5“ – 65“, USB/RS232 controler board Industrial temperature range Mechanical rugged solution High transmissivity Surface Acoustic Wave (SAW) Size 10,4“ – 23,1“, USB/RS232 controler board No stylus problem High transmissivity Page: 28 Complex embedded solution Imaging – Driving boards AD board Resolution from VGA to HD On Screen Display (OSD) board with buttons VGA or DVI-D input LVDS or RGB output Options: audio, YCB, light sensor control Converting boards Convert several display standards VGA/DVI --> RGB/ LVDS LVDS --> RGB, RGB --> LVDS LVDS/ RGB --> DVI VGA --> TV-out LVDS --> 4x LVDS Page: 29 Complex embedded solution Imaging - Invertor Display CCFL and WLED invertor Encapsulated and open frame version Up to 3000:1 dimming ratio Industry temperature range High efficient 5 and 12V models Cross reference guide available Display CCFL and WLED invertor Piezo-ceramic princip Low EMI Sinus wave output support long life of CCFL Cross reference guide available Page: 30 Complex embedded solution Imaging - Display kit Set of components from one hand Controller board can be: AD board Single board computer (SBC) Board converting signals, for example from RGB to LVDS etc Page: 31 Complex embedded solution Imaging – Monitor Open frame monitor 12,1“ – 15“– 17“– 19“ VGA or DVI input VESA standard Resistive or SAW touch screen USB/RS232 touch screen controler Dust proof (with SAW) Input voltage: 240V Touch monitor 7“ – 8“ – 10,4“– 12,1“ – 15“– 17“– 19“– 19“wide VGA or DVI input All models with resistive touch screen 15“ – 17“ – 19“ with SAW touch screen USB/RS232 touch screen controler Input voltage: 240V Page: 32 Complex embedded solution Imaging – Medical monitor Features Size: typical 19“ – 21“ Monochrom or Color Contrast typ. 700:1 Input: analog RGB, DVI Constant bright over life time Applications Medical equipments Page: 33 Complex embedded solution INPUT/ OUTPUT Page: 34 OEM printer modules Kyeboard & touch pad Complex embedded solution Input/ output - Printer Features Complete OEM printer Paper width 2“ – 3“ – 4“ Print speed 150 or 200 mm/s Cutter 1 milion cuts Driving board USB or RS232 Autoloading system, openable head Option: bezel, presenter, paper holder max 200 mm Front bezel Retraction presenter Page: 35 Printer with presenter and paper roll 200 mm (up and down pos.) Complex embedded solution Input/ output - Printer Ticket printer Printer kit Kiosk printer Front exchange of paper Pinhole printer Page: 36 Pinhole printer Complex embedded solution Input/ output - Kyeboard Stainless steel keyboards and trackballs USB or PS2 interface (RS232) Rear mounting or in shell 3DES encryption for ATM/ kiosk Page: 37 Complex embedded solution Memory MEMORY Page: 38 Compact Flash DRAM Hard disc Solid state disc (SSD) Complex embedded solution Memory Compact Flash Commercial/ Industrial operating temperature Low power, Power saving mode ATA or true IDE interface (fix disc or removable) Compact Flash card Other memory DRAM Hard disc Solid state disc Solid State Disk SSD 2.5” SATA Disk-On-Chip IDE Solid State Disk USB Page: 39 SDRAM module Complex embedded solution Service SERVICE Page: 40 Cable set BIOS adjustment Board customization Technical support Complex embedded solution Thank you Page: 41 Complex embedded solution