E UROTECH E LITE
M U L T I F L E X B750 L- Y
QUOTATION
FOR
3/23/2016• Specifications may change without notice.
E UROTECH E LITE
MULTIFLEX B750 LY
Universal Turning Center
MODEL B750 LY 6-AXIS
TURNING CENTER WITH
LIVE TOOLS,
DUAL C AXES, AND Y-AXIS
• 12” CHUCK, 3.75” BAR CAPACITY
• 40 HP TWO SPEED SPINDLE
• ALL BOXWAY CONSTRUCTION
• FULL 5.5” OF “Y” AXIS STROKE
STANDARD FEATURES
• Fanuc 32i-T control with 10.4” color monitor
and full keyboard.
• Tool load monitoring system.
• 10.4” Graphics parts cutting display.
• Extended editing functions; merge, change,
move, copy.
• 32-bit CPU high-speed Pentium microprocessor
CNC system.
• 3,000 RPM main spindle speed.
• 40 horsepower spindle motor
• 16 station turret.
• 0.3 seconds/station turret indexing
• 945 IPM B-axis rapid traverse.
• 945 IPM Z -axis rapid traverse.
• 709 IPM X -axis rapid traverse.
• 295 IPM Y -axis rapid traverse.
• 12” 3-jaw chuck on main spindle.
• Rigid tapping; main, live -tool spindle.
• High pressure coolant system.
3/23/2016
• Set of static and live tool holders.
• Programmable tool probe system.
• Revolving tool attachment for live spindle
tooling.
• Revolving tools driven by 23 horsepower built
in spindle drive motor inside turret disc
thermally stabilized by cooling unit.
• 16 revolving tool stations.
• C-axis control on main
• (1) X-axis mill/drill tool & (1) Z-axis mill/drill
tool.
• Air conditioned electronics cabinet.
• Chip conveyor.
• Programmable parts catcher
• Eurotech Gap Elimination Ladder Logic for
faster cycle time
• Free lifetime programming classes
• Free online phone support for both maintenance
and programming
• 1-year warranty on machine.
2
The flat cast-iron guide ways are hardened, ground and hand scraped
to assure stability and accuracy.
The 45-degree slant bed provides optimum chip flow for chip
removal. The entire base is engineered to eliminate unwanted machine
vibration. This thoroughly tested and proven machine design delivers
rigidity, accuracy, and performance.
MAIN SPINDLE
The B750 LY incorporates a wide-range 53 horsepower Fanuc built
in spindle drive motor inside the turret disc. This built in motor is
thermally stabilized with a cooling unit.
The motor has an electronic type C-Axis. Milling, drilling, tapping
and cam profiling can be performed with the interpolation of the X, Z,
C and Y axes.
The spindle operates from 0 to 3,000 RPM. The wide range constant
output spindle motor provides powerful cutting throughout the spindle
speed range
DESIGN AND
CONSTRUCTION
The B750 LY utilizes a state-of
the art 45-degree slant bed cast
base.
3/23/2016
3
TURRET
The B750 LY horizontal-axis turret is made at the factory. This 16station bi-directional turret can accept 16 power-driven tools. The
driven tools engage directly thanks to the built-in (thermally stabilized)
spindle motor inside the turret disc. The turret index speed is a fast 0.3
seconds. The ability of the turret to “index-on-the-fly” further reduces
idle time.
Bi-directional turret indexing allows the turret automatically to take
the shortest path to the next selected cutting tool station. The design
and speed of the high-capacity turret yields reduced cycle times and
lower part cost.
REVOLVING TOOL ATTACHMENT
Cross/end drilling, milling and tapping operations can be performed
using power-driven tools. This capability eliminates the need to
perform secondary operations on a mill, thus reducing handling times
and increasing productivity.
The tools are driven by a 23 horsepower Fanuc AC spindle motor.
The motor provides 41 ft pounds of torque The main spindle is
equipped with C-axis and a disc brake which ensures accurate spindle
positioning, allowing heavy cuts to be performed. The C-axis control
can be turned on without stopping the spindle, reducing cycle times.
Both C-axes positioning is accomplished with rotary Heidenhien scales.
FULL “Y” AXIS
The independent movement of a dedicated Y-axis slide provides the
capability to do complicated milling operations and enables the use of
many more cutting tools (up to 96) in the turret.
Y-axis operation is achieved by the simultaneous wedge-type
movement of two independent slides. This design distributes machining
load over the two slides assuring exceptional rigidity and maximum
accuracy in both turning and milling operations. A full 5.5” of Y-axis
ensures more flexibility in part processing. Both X and Y-axes are
fitted with scales for the utmost in accuracy.
AXIS DRIVES
The X, Z, and B axes are driven by precision ball screws and preloaded ball screw nuts, center-mounted between the ways for optimum
drive conditions. Automatic lubrication on all ways provides smoother
operation and reduced maintenance expense. All drives are protected
by covers and chip guards to prevent damage from coolant and chips.
The drive motors are all AC Fanuc closed-loop servo drives.
TOOL PROBE
The electronic probe makes for fast and easy setting of tools, while
avoiding the danger of operator error. The operator simply pushes a
button to touch-off the tools after each set-up or insert change. The
system automatically sends all data relevant to tool position to the CNC
unit for storage.
The tool probe is mounted on a sturdy hydraulic arm. While not in
use, the arm retracts and stores the tool probe in a compartment.
3/23/2016
4
RIGID TAPPING & POLYGONAL TURNING-STANDARD
Rigid tapping is fast, quick, easy, yields precise threads, and does not
need tap-holders with adjusted stroke. It is controlled through an Mfunction, which synchronizes rotation with slide feed and is available on
main, and live-tool spindles.
WORK HOLDING SYSTEM
The machine comes standard with a 3-jaw Autoblok chuck on the
main (12”). Various special workholding is available on a perapplication basis.
Optionally the machine may be fitted with an innovative dead-length
collet chuck system with rapid-action bayonet locking caps. This
German-made system allows an operator to change a collet in under
sixty seconds.
OPTIONAL: PROGRAMMABLE PARTS CATCHER AND
CONVEYOR
The parts catcher is programmable for continuous bar work
operation. After machining, the part drops into a parts catcher bucket.
The parts catcher then deposits the part onto a parts conveyor, which
transports the part into a parts pan. It can be set to work on the main
spindle.
HIGH PRESSURE COOLANT SYSTEM
The high-pressure coolant is fed through the turret for the station in
use to tip of the cutting tool. The high-pressure coolant pump is
start/stop programmable and capable of providing 60 gpm. This system
provides maximum chip clearing.
EUROTECH STANDARD BARFEED INTERFACE
A 24 pin Hartig plug is provided already wired completely to
interface with any style or brand of bar feeding device. This standard
feature will compliment the most sophisticated magazine type barfeed,
as well as the simplest hydrodynamic unit.
3/23/2016
5
CHIP CONVEYOR
The chip conveyor provides automatic chip disposal. The chip
conveyor is located below the work area and chips are channeled out of
the machine for easy discharge into a chip cart.
On and off times are controlled through P.C. timers to save coolants
and reduce waste.
AIR CONDITIONED CABINETS
The electronics cabinet is kept at a constant temperature by a
sophisticated air conditioning system. This system decreases
maintenance downtime and cost. Using environmentally safe
refrigerant, it also lengthens the life of the machine’s control and PC
boards.
FANUC 32i-T CONTROL
The machine utilizes a Eurotech Elite Fanuc 32i-T control with a 32bit hi-speed Pentium microprocessor. This 32-bit CNC system provides
a processing speed that is many times faster than conventional 32-bit
systems. Part program cycle time is reduced to obtain a higher level of
productivity.
Eurotech Elite’s graphic parts cutting display allows programming
accuracy to be checked prior to actual machining by displaying the
programmed tool path in graphic form on the 10.4” color LCD screen.
Eurotech Elite’s work coordinate system sets the tool indexing
position, simplifying programming and tool set-up and reducing
machining time. The turret can be programmed to be indexed anywhere
along the slide axes; either in front or along side of the work piece.
Cutting tool approach distance is shortened and chip—to-chip time is
kept to a minimum.
Tool geometry offsets provide easy programming and tool setting on
the machine. Work coordinate offsets (G54-G59) further enhance the
B750 LY’s flexibility.
Macro “B” is standard on all Eurotech’s machines to simplify
programming families of parts. This function’s capabilities include
parts counting, tool management, clock functions, and much more.
The extended edit features, copy, move, merge and change, allow
very quick program restructure or copying, right at the keypad.
The servo tuning page and spindle tuning/monitoring access make
optimizing your programs much easier than conventional controls.
3/23/2016
6
B750 LY SPECIFICATIONS
MACHINING CAPACITY
REVOLVING TOOL ATTACHMENT TURRET
Maximum bar capacity ................................................ 3.75”
Maximum machining diameter.................................... 18.4”
Maximum machining length ...................................... 29.5”
Maximum swing over diameter on the bench ............ 26.7”
Number of positions ..................................................... 16
Drive motor – max. rating (Fanuc) ....................... 23 HP
Speed range (infinitely variable) ................... 6,000 RPM
Engagement time ............................................ immediate
MAIN SPINDLE
C-AXIS CONTROL W/ SPINDLE POSITIONING
Spindle bore................................................................ 4.17”
Spindle speed range (infinitely variable) .......... 3,000 RPM
Spindle motor ........................................................... 53 HP
Motor type ......................................................... Wide range
Spindle nose ...................................................... ASA A2-8
Y-axis stroke
..................................................... 5.5”
Spindles ................................................................... Main
Spindle positioning............................................. Full “C”
Minimum command increment ................... 0.001 degree
Positioning system..................................... Spindle motor
Degree of movement ................................ .Programmable
Rapid speed rate ............................................... 100 RPM
TURRET
GENERAL INFORMATION
Turret indexing time . ........... . 0.3 sec/pos. (1-station)
Turret indexing type....................................... bi-directional
Number of stations ......................................................... 16
Voltage required ............................. 400 volt AC, 3-phase
Air required ........................................... 80 psi @ 4 CFM
Amperage Draw ................................................ 75 Amp.
MACHINE DIMENSIONS
Width. ........................................................................ 80”
Height ..................................................................... 87.5”
Length with chip conveyor ................................... 157.5”
Machine weight with chip conveyor .............. 16,755 lbs.
ACCURACY
Z-axis repeatability
accuracy (encoder) ....................................... +.00004”
X and Y-axis positioning
accuracy (scales) ........................................... +.00006”
C-axis repeatability
. ......................... +0.0001 degree
C-axis positioning accuracy ................... +0.0005 degree
NOTE: Horsepower given are the 30 min. ratings.
* Chuck RPM limitations may apply.
3/23/2016
7
EUROTECH FANUC 32i-T CONTROL
STANDARD FEATURES
• 32-bit hi-speed Pentium CPU
• Straight, taper, and face threading
• 10.4” color LCD display with extensive
operator’s panel
• Thread pull out
• Full keyboard
• Graphic parts cutting display
• Background editing
• Extended editing functions
(copy, move, merge, change)
• Constant cutting speed control (G96)
• Direct spindle speed RPM designation
• Work coordinate system (G54-G59)
• Program input of offset amount
• Tool nose radius compensation (G40, G41, 42)
• Free position turret indexing
• Workshift
• Tool geometry offsets - 64 pairs
• Call of Macro programs (G65-G66)
• Part program storage capacity - 1054 ft.
• Custom Macro A and B
• Minimum input resolution - .0001”
• B-axis offset
• Absolute/incremental dimensioning system
• 125 registered programs
• Decimal point programming
• Up to three M-codes per line
• Direct drawing input. (A=angle, C=chamfer,
R=radius)
• Six additional M-codes
• Radius designation for circular
interpolation
• Program protect
• Chuck and tailstock barrier
• Sudden interruption protection (crash protection)
• Preset parts counter
• Canned cycles: turning, drilling, and threading
(G80)
• Run time, cycle time, and parts counter display
• Multiple repetitive cycles (G70, G71, G72, and
G73)
• Preventive maintenance screen
• RS232C & PCMCIA (serial) interface
• By-pass feed and speed override w/M-code
• Error detect
• Manual rapid traverse
• Advanced diagnostic functions
• Manual pulse generator
• Display of axis and spindle motor current loads
• Programmable data input (G10)
• Alarm message system
• SBS Tool Load Monitoring
3/23/2016
8
B750 LY STANDARD EQUIPMENT
TOOL HOLDERS
(3) Radial tool holder – ¾" ............................................................................# 10.57.82.00
(1) Double radial tool holder – ¾” .................................................................# 10.57.83.00
(4) Boring bar holder – 1-1/4”........................................................................# 10.57.84.00
(2) Cut-off tool holder – ¾” ...........................................................................# 10.57.85.00
(1) Adjustable rotating bar stop ....................................................................# 41.07.02.10
(1) Radial rotary tool-heavy duty – ER 32 .................................................... # T134-00139
(1) Axial rotary tool ...................................................................................... # T134-00141
(1) 12” Autoblok 3-Jaw Chuck ............................................................................ BHD-315
(1) 8” Autoblok 3-Jaw Chuck .............................................................................. BHD-210
SEE EUROTECH TOOLING AND ACCESSORY PRICE LIST AS WELL
3/23/2016
9
Terms & Conditions
EUROTECH STANDARD TERMS AND CONDITIONS GOVERNING THE SALE OF PRODUCTS AND SERVICES
This proposal by Precise Solutions Corporation dba Eurotech, hereinafter referred to as (Eurotech), does not constitute a
firm offer, but is an invitation to place an order. All orders are subject to written acceptance by Eurotech. If an order
based upon this proposal is accepted by Eurotech, it is agreed that the order shall be subject to the terms and conditions
set forth below all of which shall be incorporated in the order by reference and shall supersede all prior oral, written, or
printed Terms and Conditions.
1.
PRICES:
a.
b.
c.
2.
PAYMENT TERMS:
a.
b.
c.
d.
e.
f.
3.
b.
Proposed shipping schedules are approximate and subject to prior sale and confirmation by the manufacturer at time
of Eurotech’s acceptance of order.
While Eurotech will use its best efforts to meet delivery schedules, it can accept no liability for loss to Buyer, whether
direct or consequential as a result of delays.
RISK OF LOSS:
a.
5.
All orders are subject to credit approval.
Payment in full of all invoices is due at time of delivery. Unless otherwise agreed to in writing, any unpaid balance
is subject to a late payment charge equal to the lesser of 2% per month or the maximum permitted by law. There
shall be no extension of or change in the time for payment due to delays in installation and/or delays In operation
of the equipment caused by damage, warranty service or warranty replacement of parts.
A non-refundable deposit of 20% is required on all machinery orders at time of order.
Buyer agrees to pay all of Eurotech’s cost including attorney's fees incurred in collecting overdue accounts.
Title and risk of loss transfer to buyer at time of delivery to common carrier
Buyer grants to seller a purchase money security interest in and to goods covered in the accepted order. Upon
default in payment obligations seller may enter purchasers or users premises to retake the goods and shall have all
the rights of a secured party under the Florida commercial code.
SHIPPING SCHEDULES:
a.
4.
All prices are F.O.B. Port of Entry unless otherwise specified. Prices are subject to change without notice until an
order is accepted by Eurotech.
All sales are made subject to applicable sales, use and excise taxes, the amount of which, Buyer agrees to pay.
All taxes and other fees are for the buyers account.
The risk of loss or damage to goods shall pass to Buyer when placed with a common carrier for delivery to Buyer.
WARRANTIES: DAMAGES:
a.
b.
3/23/2016
The machine is covered by a twelve (12) month parts and service warranty after installation; applicable to the
original Buyer of the machine and only if the machine is utilized in a generally accepted manner. The control is
covered by the manufacturer’s twenty four (24) month warranty. Defects in material or workmanship must be
determined by an inspector authorized by Eurotech.
Services-If this proposal includes services to be performed by Eurotech. Eurotech warrants that such services will
be performed in a workmanlike manner. Such warranty with respect to its services IN LIEU of all other service
10
c.
d.
e.
6.
warranties. In the event Eurotech breaches the service warranty, it shall, at its sole option, either refund the portion
of the service charge relating to the defective service or correct the default. No claim for breach of the service
warranty shall exceed the service charges.
Damages-In the event of Eurotech’s breach of any of the terms of the contract for the sale of goods or services
resulting from its acceptance of an order pursuant to this proposal it shall not be liable for any of Buyer's Indirect,
incidental, special, or consequential damages.
Production estimates are not guaranteed unless specifically noted in writing by Eurotech, even if agreed to in writing.
Production estimates are only guaranteed if all payment obligations are met by purchaser.
No warranty is offered on used or trade in equipment, sales for all used equipment is on as-is where-is basis.
CANCELLATION:
Orders accepted by Eurotech can be cancelled only with its written consent. If Eurotech consents to the cancellation of
an order, it will be protected from loss and shall have the right to receive:
a.
The contract price for all products completed prior to acceptance of the cancellation.
b.
All cost incurred by Eurotech in connection with the uncompleted portion of the order plus an amount equal to
normal profit Eurotech would have received if the order had not been canceled: and
c.
An amount equal to any cancellation charges that Eurotech incurs by reason of Buyer's Cancellation.
7.
BUYER'S USE:
a.
8.
PERFORMANCE IN THE EVENT OF DEFAULT:
a.
9.
Buyer agrees that its employees, when operating machinery or equipment purchased from Eurotech will comply
with all operating procedures set forth in manufacturers operators' manuals and instruction sheets relating to such
machinery or equipment and Buyer further agrees not to remove or modify any safety device, warning sign,
operators manual or work handling tools. Buyer shall notify Eurotech promptly of any accident connected with the
use of machinery or equipment purchased from Eurotech and agrees, upon Eurotech’s request, to cooperate with
Eurotech in Investigating and determining the cause of any such accident. Buyer agrees to indemnify and hold
Eurotech harmless from any loss or liability including attorney’s fees arising out of Buyer's failure to perform its
obligations pursuant to this paragraph.
In addition to the rights and remedies conferred on Eurotech by law, Eurotech will not be required to proceed with
the performance of any order or contract if Buyer is delinquent or in default under any other order or contract with
Eurotech. In the event that Eurotech at anytime doubts Buyer's ability to pay for goods within quoted terms,
Eurotech may ship the goods C.O.D. ·
ERRORS:
a.
Eurotech retains the right to correct any clerical errors in its acceptance of orders and Buyer agrees to promptly
notify Eurotech of any suspected clerical errors.
10. AMENDMENTS:
a.
No alterations or amendments to any contract formed by Eurotech’s acceptance of an order shall be effective unless
in writing and signed by an authorized representative of Eurotech.
11. APPLICABLE LAW:
a.
b.
c.
3/23/2016
The contract resulting from the acceptance of an order pursuant to this proposal shall be governed by and construed
according to the laws of the State of Florida.
Any and all disputes arising from the sale of an use Eurotech machinery and equipment may only be resolved in the
State of Florida commercial code.
If any of these terms are held to be unenforceable, that which remains shall continue in full force and effect.
11