Cisco 2811 V03 (2056)
The Cisco 2811 Integrated Services Router is part of the Cisco 2800 Integrated
Services Router Series which complements the Integrated Services Router Portfolio.
The Cisco 2811 Integrated Services Router provides the following support:










Wire-speed performance for concurrent services such as security and voice ,
and advanced services to multiple T1/E1/xDSL WAN rates
Enhanced investment protection through increased performance and
modularity
Increased density through High-Speed WAN Interface Card Slots (four)
Enhanced Network Module Slot
Support for over 90 existing and new modules
Support for majority of existing AIMs, NMs, WICs, VWICs, and VICs
Two Integrated 10/100 Fast Ethernet ports
Optional Layer 2 switching support with Power over Ethernet (PoE) (as an
option)
Security
o On-board encryption
o Support of up to 1500 VPN tunnels with the AIM-EPII-PLUS Module
o Antivirus defense support through Network Admission Control (NAC)
o Intrusion Prevention as well as stateful Cisco IOS Firewall support and
many more essential security features
Voice
o Analog and digital voice call support
o Optional voice mail support
o Optional support for Cisco CallManager Express (Cisco CME) for local
call processing in stand alone business for up to36 IP Phones
o Optional support for Survivable Remote Site Telephony support for
local call processing in small enterprise branch offices for up to 36 IP
phones
device
ports
interface
slots
modules
performance
memory
notice
Cisco 2811 router
2 x FastEthernet
2 x USB 1.1 ports
4 slots, each slot can support HWIC, WIC, VIC, or VWIC
type modules
256MB 64MB FLASH
Number of Expansion Slots: 4
Router#sh version
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
12.4(13a), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 06-Mar-07 17:01 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Router uptime is 2 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-adventerprisek9-mz.124-13a.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 2811 (revision 53.50) with 249856K/12288K bytes of memory.
Processor board ID FCZ1139728G
2 FastEthernet interfaces
1 Serial(sync/async) interface
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2142