WJT ASSOCIATES' PROCESS OPTIMIZATION SEMINAR
Bill Tobin
has been a
professional
in Plastics
for more
than 30
years. Bill
has written
more than
20 books and 250+ published
articles. He is a frequent presenter and trainer at conventions and professional functions.
His consulting firm WJT Associates provides services in all areas of injection molding as well as
expert witness testimony.
SEMINAR:
PROCESS OPTIMIZATION
The seminar will be a brief overview of applying Scientific Molding to the injection molding
process and troubleshooting
those pesky defects that still
come up. The seminar will concentrate on improving process
yields and getting the process
right the first time. This is not a
seminar where you have to remember everything or take
notes and hope you can recall
the information later.
Each attendee will get two valuable books written by the instructor: (1) SCIENTIFIC INJECTION MOLDING explaining the
process in detail and including a
CD allowing you to create your
own Universal Spreadsheet. (2)
TROUBLESHOOTING INJECTION
MOLDED PARTS giving in depth
explanation of the possible
causes of molded defects.
You'll also learn

How to make the same
quality parts, at the same cycle
time on different machines
whether at your shop or another
facility.
 Eliminating problems at the
validation trial and not during
production.
2015
 Avoiding variations that will
invalidate your PPAP, FDA etc.
validations.
How to define
 Cosmetics
 Function
 Dimensions
 The Universal Definition of
Quality
 “Acceptable Parts”
WHO SHOULD ATTEND
-Those who have applied the
Scientific Molding principles but
still find variations in their processes (note: these can be
fixed).
-Engineers, molding technicians,
quality assurance people who
want a hands-off, consistent
quality continuous molding process.
-Management personnel who
no longer want to hear about
money-losing 'explainable variances' from a supposedly validated molding process.
.
Expected Outcomes:
Optimized cycles times from the
beginning
Maximum utilization of your
equipment
A more professional workforce
focused on productivity and
profit
New tooling startups that don’t
need to ‘be processed in’, or
start with high scrap rates
Less miscommunication on
standards
Learn how to do the experiments to OPTIMIZE your cycle;
 Setting the clamp pressure
 Setting the distances
 Optimizing fill
 Optimizing pack
 Optimizing cool
 Heat profiles
Construct a universal setup
sheet that gives you the process
settings automatically from one
machine to another without
having to start from scratch.
WHERE WHEN
15-Sep
La Quinta Portland
11207 NE Holman St
Portland, OR 97220
503-382-3820
16-Sep
Ramada SeaTac Airport
16720 International
Blvd,
Sea Tac, WA 98188
206-277-0700
14-Oct
Wellesley Inn-Atlanta
Airport
1377 Virginia Ave
East Point, GA 30344
(404) 762-5111
WJT ASSOCIATES' PROCESS OPTIMIZATION SEMINAR
Details
Tuition $300.00 each
Note: A minimum attendance must be achieved for the seminar to go forward. You will be notified by e-mail one week before as to the status. Credit cards will not be charge nor checks
cashed until the seminar‘s minimum has been met.
8:30 AM to 4:30 PM Breaks and lunch (pizza) provided. Please arrive 8:15 - 8:30
INSTRUCTIONS: - FILL IN GREY CELLS, SAVE, E-MAIL
Process Optimization with Bill Tobin:
Seminar we will attend (from list below)
Cutoff
date
Price
15 Sept, La Quinta Portland, 11207 Northeast Holman St, Portland OR 97220
8-Sep
$300
16 Sept Ramada SeaTac Airport, 16720 International Blvd, Sea Tac, WA 98188
8-Sep
$300
14 Oct Wellesley Inn-Atlanta Airport, 1377 Virginia Ave, East Point, GA 30344
7-Oct
$300
SEMINAR LOCATION
Buy 3 get 4th Free
Instructions: Fill in information save file and email or Print file, Scan and e-mail
Note: A minimum attendance must be achieved for the seminar to go forward. You will be
notified by e-mail one week before as to the status. Credit cards will not be charge nor checks
cashed until the seminar‘s minimum has been met. (Visa or MasterCard preferred). You are advised against booking travel reservations until the class will go forward.
Name on credit card
Card number
exp date
(mm/yy)
CVV#
Company
City
Zip code
Phone
e-mail
So you can be contacted as to the status of the seminar
Date email sent (for cut-off date purposes)
2015
State
WJT ASSOCIATES' PROCESS OPTIMIZATION SEMINAR
If you are concerned about giving your credit card information on the internet, send it in two
separate e-mails.
e-mail - bill4012@hotmail.com SUBJECT - MOLDING SEMINAR
Phone with questions 303 604 9592
Name of attendees
1.
2.
3.
4.
5.
Use additional sheet if necessary
2015
Job Title
Email