WJT Associates Scientific Molding Seminar March/April 2013
Bill
Tobin
has been a
professional
in Plastics
for
more
than
30
years. Bill
has written
more than 20 books and 250+
published articles. He is a frequent
presenter and trainer at conventions
and professional functions. His
consulting firm WJT Associates
provides services in all areas of
injection molding as well as expert
witness testimony.
The seminar is designed to give a
better understanding of the injection
molding process. Scientific Molding
is not about transducers and signal
processors. It requires a full
understanding of the molding process
from beginning to end. The seminar is
very interactive with the class. It is
presented in a light-hearted manner
that is enjoyable to everyone.
In-house savings:
If you are considering sending more
than three people AND traveling
more than 200 miles to attend the
seminar; contact us. It is probably
cheaper for us to come to you and put
on a seminar for more than 10 people
at the same cost.
Other Locations?
We’d be glad to entertain other
locations for this seminar upon your
suggestions.
Ideal for:
Setup Technicians
Troubleshooting Technicians
First (possibly second) level
supervision
Maintenance Technicians
Process Engineering
Quality Control
Tool and Die Personnel
Expected Outcomes:
Optimized cycles times from the
beginning
Maximum utilization of your
equipment
A more professional workforce
focused on productivity and profit
New tooling startups that don’t need
to ‘be processed in’, or start with
high scrap rates
Less miscommunication on standards
Lower initial and on going defects
Repeatable Quality
When and where:

29 March Candlewood Suites
Chicago-O’Hare 4021 North
Mannheim Road, Schiller Park,
IL
847. 671.4663

10 April Quality Inn Airport
Tempe
1550 South 52nd Street
Tempe, AZ 85281
480 967-3000

11 April La Quinta Inn and
Suites
Orange County – Santa Ana
2721 Hotel Terrace
Santa Ana CA 92705
714 540-1111
Details
Tuition $250.00 each
Buy 3 get 4th Free
Note: A minimum attendance must be
achieved for the seminar to go
forward. You will be notified by email one week before as to the status.
Credit cards will not be charge nor
checks cashed until the seminar‘s
minimum has been met.
8:30 AM to 4:30PM Breaks and lunch
(pizza) provided. Please arrive 8:15 8:30
Each attendee will get the book
SCIENTIFIC MOLDING and CD
with experiments, explanations and
procedures.
What you’ll learn
Be able to put the Science in to
Scientific Molding. Learn how to do
the experiments to OPTIMIZE your
cycle;
 Setting the clamp pressure
 Setting the distances
 Optimizing fill
 Optimizing pack
 Optimizing cool
 Heat profiles
Construct a universal setup sheet
that gives you the process settings
automatically from one machine to
another without having to start from
scratch.
Learn how to determine if you
have a robust machine.
Learn when to submit samples to
your customer.
QUALITY – take out the guess
work. Learn how to define
 Cosmetics
 Function
 Dimensions
 The Universal Definition of Quality
 What “acceptable” REALLY is
WJT Associates Scientific Molding Seminar March/April 2013
INSTRUCTIONS: - FILL IN GREY CELLS, SAVE, E-MAIL
Scientific Molding with Bill Tobin:
Seminar we will attend (from list below)
Seminar
Cutoff date
Price before
cutoff date
Price after
cutoff date
29 March Chicago, IL
10 April Tempe, AZ
11 April Irvine, CA
20 Mar 2013
3 April 2013
3 April 2013
$250
$250
$250
$450
$450
$450
Buy 3 get 4th Free
Note: A minimum attendance must be achieved for the seminar to go forward. You
will be notified by e-mail one week before as to the status. Credit cards will not be
charge nor checks cashed until the seminar‘s minimum has been met. (Visa or
MasterCard preferred). You are advised against booking travel reservations until the class
will go forward.
Name on credit card
Card number
exp date
(mm/yy)
Company
City
State
Phone
Zip code
e-mail
So you can be contacted as to the status of the seminar
Date email sent
(for cut-off date purposes)
Instructions: Fill in information save file and email or Print file, Scan and e-mail
If you are concerned about giving your credit card information on the internet, send it in two
separate e-mails.
e-mail - bill4012@hotmail.com SUBJECT - SCIENTIFIC MOLDING SEMINAR
Phone with questions 303 604 9592
Name of attendees
1.
2.
3.
4.
Job Title
Email