Workshop Equipment
CATALOGUE
Unit 10 Keymax, Industrial Park
1006 Ergon Road
Lyttelton
info@imworkshopequipment.co.za
www.imworkshopequipment.co.za
Tel: (012) 664 3556
Fax: (086) 568 8466
Product and colour may vary from pictures shown
Page 1
Air Con Service Equipment
Zell AC1000-3G Air-Con Service Station
AC1000-3G Specification & Configuration
Refrigerant
Operating Temperature
Max pressure
Power Supply
Weight
Packing Size
HP/LP Gauge
Tank Gauge
LCD back lit
HP/LP hoses
Compressor
Fan/ condenser
Filter Drier
Vacuum Pump
PAG bottle
Electronic Scale
R134a
5 – 50 o C
18 bar
220v, 50Hz
95kg
50 x 70 x 107cm
80mm/class 1.0
40mm
192 x 64 dot
250cm / SAE-JS2196
3/8hp, 14cc
Yes
80kg
120L/min, 4.2cfm
250ml
1g / 30kg
Zell AC1000-HFO Air-Con Service Station
AC1000-HFO Specification & Configuration
Refrigerant
Operating Temperature
Max pressure
Power Supply
Weight
Packing Size
HP/LP Gauge
Tank Gauge
LCD back lit
HP/LP hoses
Compressor
Fan/ condenser
Filter Drier
Vacuum Pump
Tank
PAG bottle
Electronic Scale
HFO-R1234yf
5 – 50 o C
18 bar
220v, 50Hz
95kg
50 x 70 x 107cm
80mm/class 1.0
40mm
192 x 64 dot
250cm / SAE-JS2196
3/8hp, 14cc
Yes
80kg
120L/min, 4.2cfm
14.5 L
250ml
1g / 30kg
AC Leak Detection Kit
Add leak detection dye to the system that you want to
inspect. Scan the system with the special fluorescent
glasses and UV light.
This Dye can be injected directly into the AC system.
Kit consist of enough Dye to inspect 14 vehicles.
Product and colour may vary from pictures shown
Page 2
Tyre Tools
IM- BBR Bead Knocker / Stamper
IM- BB Bead Blaster
IM-BB-05
IM-BB-10
IM- Tubeless Tyre Changing Tool Set
Demounting Tool
Mounting Tool
Weight: 11kg
Dimension: 400x450x360mm
Weight: 15kg
Dimension: 600x480x360mm
Rapid tyre inflation, after tyre fitting. Equipped with automatic
purge of over limit pressure., Supplied with Pressure Gauge
Input pressure: 8 bar /120psi
Operating pressure: 6 - 8 bar / 87-116psi
Max. pressure: 10 bar / 145Psi
Pneumatic Thumb operated Tyre Spreader
Bead Keeper
Set consists of:
1 x Demounting Tool, 1 x Mounting Tool, 1 x Bead Keeper
Mount and de-mount all tubeless tires 17.5'' to 24.5''.
Demount tyre in 8 seconds, Re-mount in 20 seconds
without strain - Two simple tools do it all. Works on all
standard tubeless and super single duplex tyres. The
Changing Tools do not damage beads. Mounts and
demount tyres without the need to lift the tyre. The bead
keeper prevent the bead from skipping when mounting
the top bead. Metal construction coated with PVC will not
scratch aluminium wheels
IM- AAT400 Tyre Caddy
Thumb operated pneumatic tyre spreader,
used to spread tyres open for inspection
or repairs.
Stack Height
1500mm
Weight
17kg
Packing size
850 x 600 x 1530mm
Due to its jaws and easy manoeuvrability,
it allows a pile of tyres to be loaded without
having to touch them by hand
IM - Easy tyre mount/demount Kit
The Easy Tyre Mount /Demount Kit has become the industry
standard for changing tubeless truck tyres. By using simple
principles of leverage, the Easy tyre Mount/Demount kit actually
works with the tyre and rim to do the work for you, in less time,
with less strain, at a fraction of the cost of tyre changing
machines. The Easy tyre mount/demount kit mounts and
dismounts all tubeless truck tyres from 17.5” up to 24.5” and all
super singles. It’s the safest, fastest, and easiest way ever
invented to change tubeless truck tyres – guaranteed not to
damage tyre beads.
Product and colour may vary from pictures shown
Page 3
Brake Lathe’s
IM- AA202D On car brake disc lathe
Maximum brake disc thickness 40mm
Adjustment knob accuracy ≤0.02mm -≤0.01mm
Feed rate 8.5mm/min
Electrical specifications 220V / 110V
Net weight 11kg
415 x 295
Drive Unit:
Working height min / max 1 / 1.20m
Drive speed 98rpm
Electrical specifications 220V / 110V
Weight 68kg
Ambient temperature range -20℃ to 40℃
Year of construction show on information plate
Turning accuracy ≤ 0.005mm
Brake disc run out ≤ 0.005mm
Brake disc thickness variation 0.005 – 0.01mm
Brake disc surface roughness Ra 1.5 – 2.0um
Standard parts for BL-202D
IM- OTCL450A On car brake disc lathe
Maximum rotor turning diameter
360mm
Maximum Rotor Thickness
51mm
Maximum Rotor friction Surface Area
76mm
Feed Distance
110mm
Spindle Revolutions Variable Speed 30-120 RPM
Motor Power
1.5HP (1.1kw) @ 3450rpm
Electric Power
AC220v 50/60Hz 15A
IM- C9350 Off car brake disc lathe
Spindle Travel
175mm
Spindle Speed
70, 80, 118 RPM
Min Spindle Feed Speed 0.05 mm per revolution
Max Spindle Feed Speed 0.50mm per revolution
Min Cross Feed Speed
0.05 mm per revolution
Max Cross Feed Speed
0.50 mm per revolution
Hand wheel Graduations
0.05mm
Rotor Diameter
180mm – 381mm
Rotor Thickness
48mm
Drum Diameter
152mm – 711mm
Drum Depth
175mm
Motor
1PH 220v 50/60 Hz / 3PH 380v 50/60Hz
Weight
200kg
Dimensions
970 x 920 x 1140mm
IM- C9335B Off car brake disc / drum lathe
Drum Diameter
Slide Travel
Rotational Speed of spindle
Feed
Motor Power
Overall Dimensions
Packing Dimensions
Nett Weight
Gross Weight
180-350mm
100mm
60, 90 RPM
0.15mm per revolution
0.75Kw
695mm x 565mmx 635mm
710mm x 750mm x 730mm
200kg
230kg
Product and colour may vary from pictures shown
Page 4
IM- SD1206 Coil Spring Compressor
IM- SD1205 Coil Spring Compressor
Capacity：
1Ton
Max. working length:
450mm
Ram travel:
420mm
Spring size:
4~6-1/2 inch
Air pressure:
0.65-0.9MPa
N.W.:
63kgs
G.W.:
67kgs
Package Size：140.5x54.5x29cm
Specifications
Maximum Load :
1500
Upper Yoke positions:
7
Lower Yoke Travel:
340mm
Spring Diameter:
102 – 160mm
Foot operated air hydraulic unit
IM- AA0601D Hydraulic Engine Crane 3 ton
IM- AA0101G Telescopic Gearbox Jack
Rated loading capacity
1 ton
Minimum Height
830mm
Maximum Height
1760mm
G.W.
89kg
N.W.
79kg
Packing size
550 x 370 x 1000mm
Rated loading capacity
3 ton
Maximum Height
2200 mm
G.W.
113kg
N.W.
118kg
Packing size
1130 x 810 x 110mm
1420 x 310 x 210mm
730 x 200 x 190mm
IM - Hydraulic Pipe Bender
IM- HA8000 Headlight Aimer
Measuring Range:
Central Height of Headlight
50cm – 130cm
Light Intensity of High Beam
+/- 100cd
Indication Error: Light Intensity of High Beam
+/- 12%
Measure distance:
30 – 50cm
Power consumption
<0.5W
Dimensions
590mm x 1810 mm x 590mm
Nett Weight
30kg
Environmental Temperature
5 – 40 degrees C
Relative humidity:
Less than 95%
Atmosphere Pressure:
70 – 106 Kpa
Power Supply:
9v DC
(If AC power is used an inverter should be used)
•Maximum bending radius: 5" / 127 mm
•Minimum bending radius: 3-1/3" / 89 mm
•Maximum tube capacity: 3" / 76 mm / .095 wall
•Standard die pack (BB-1): 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2"
•Top cylinder working force: 60,000 lbs. / 27,216 kg
•Dimensions: 42" x 62" x 31" / 1,067 mm x 1,575 mm x 787 mm
•Standard motor: 5 Hp / 208 - 230 VAC / 60 Hz / 1 pH
•Shipping weight: 1,264 lbs. / 573 kg
•Shipping dimensions: 48" x 70" x 30" / 1,219 mm x 1,778 mm x 762 mm
Atek Multi - Electrical 1” Impact Wrench
1” Impact Wrench Standard Accessories: 3 Impact sockets, 1 Safety pin, 1 Fixing O-ring Technical
Specifications: Height 1070mm Width 1340mm, Length 560mm, Net Weight 64kg , Spindle Torque
: 37Kpm / 370Nm, 52Kpm / 520Nm, 64Kpm / 640Nm, 71Kpm / 710Nm 380v
Product and colour may vary from pictures shown
Page 5
SA40 Two Post Lift with base plate – 4 ton capacity (Manual Release)
Specifications – SA40
Lifting Capacity
4000 kg
Locking release
Manual
Min Height
100 mm
Lifting Height
1900mm
Power of motor
2.2 kw
Oil Pressure
18 MPa
Power Supply
220v
Lifting time
50 s
Lowering Time
40 s
Floor plate design, more suitable for
low ceiling workshops. Single side
Manual lock release. Dual cylinders
located in Master and slave column.
Dynamic test 115% of the rated
capacity. Static test: 150% of the rated
capacity. Dual antic skidding safety
device from column ladder safety to
hydraulic seal protection. Special
hydraulic system designed to avoid
overload running. ABS control box,
24v low voltage control system. High
strength chain drive system. High
quality seals from Italy. Quality power
rack. CE Certified – Red
Also Available in Electric Release
(SAE40)
Reinforcement base plate for uneven floor
SB40 Two Post Lift , Base free – 4 ton capacity (Manual Release)
Clear floor design makes under-vehicle
service more convenient. Manual lock release
on both sides. Dual cylinders located in
Master and slave column. Dynamic test 115%
of the rated capacity. Static test: 150% of the
rated capacity. Dual anti skidding safety
device from column ladder safety to hydraulic
seal protection. Special hydraulic system
designed to avoid overload running. ABS
control box, 24v low voltage control system.
High strength chain drive system, High quality
seals from Italy. CE Certified – Red
Also available in Electric Release (SBE40)
Specifications – SB40
Lifting Capacity
4000 kg
Lock release
Manual
Min Height
110 mm
Lifting Height
1900mm
Column Height
3722mm
Power of motor
2.2 kw
Oil Pressure
18 MPa
Power Supply
220v/380v
Lifting time
50 s
Lowering Time
40 s
SBE40H Two Post Lift , Base free – 4 ton capacity - Extended Height (Electric Release)
Specifications – SBE40H
Lifting Capacity
4000 kg
Lock release
Electric
Min Height
110 mm
Lifting Height
1900mm
Column Height
3900mm
Power of motor
2.2 kw
Oil Pressure
18 MPa
Power Supply
220v / 380v
Lifting time
50 s
Lowering Time
40 s
Clear floor design makes under vehicle service
more convenient. Single side electrical lock
release. Dual cylinders located in Master and
slave column. Dynamic test 115% of the rated
capacity. Static test: 150% of the rated capacity
.Dual antic skidding safety device from column
ladder safety to hydraulic seal protection Special
hydraulic system designed to avoid overload
running. ABS control box, 24v low voltage
control system. High quality seals from Italy.
High strength chain drive system, Quality power
rack - Red
Product and colour may vary from pictures shown
Page 6
SAE40 Two Post Lift with base plate – 4 ton capacity (Electric Release)
Reinforcement base plate for uneven floor
Specifications – SAE40
Lifting Capacity
4000 kg
Locking release
Electrical
Min Height
100 mm
Lifting Height
1900mm
Power of motor
2.2 kw
Oil Pressure
18 MPa
Power Supply
220v
Lifting time
50 s
Lowering Time
40 s
Floor plate design, more suitable for low ceiling workshops.
Single side electrical lock release. Dual cylinders located in
Master and slave column. Dynamic test 115% of the rated
capacity. Static test: 150% of the rated capacity. Dual antic
skidding safety device from column ladder safety to hydraulic seal
protection. Special hydraulic system designed to avoid overload
running. ABS control box, 24v low voltage control system. High
strength chain drive system. High quality seals from Italy. Quality
power rack. CE Certified - Red
SBE40 Two Post Lift , Base free – 4 ton capacity (Electric Release)
Specifications – SBE40
Clear floor design makes under vehicle service more convenient. Single
side electrical lock release. Dual cylinders located in Master and slave
column. Dynamic test 115% of the rated capacity. Static test: 150% of
the rated capacity .Dual antic skidding safety device from column
ladder safety to hydraulic seal protection Special hydraulic system
designed to avoid overload running. ABS control box, 24v low voltage
control system. High quality seals from Italy. High strength chain drive
system
Quality power rack - Red
Lifting Capacity
4000 kg
Lock release
Electric
Min Height
110 mm
Lifting Height
1900mm
Column Height
3776mm
Power of motor
2.2 kw
Oil Pressure
18 MPa
Power Supply
220v / 380v
Lifting time
50 s
Lowering Time
40 s
Product and colour may vary from pictures shown
Page 7
SDW50 Four Post Wheel Alignment Lift – 5 ton capacity
Specifications – SDW50
Lifting Capacity
Lifting Height
IM-C/Jack- Auxiliary jack with hand pump
1850 mm
Secondary lifting Height
450 mm
Secondary Lifting weight
3000 kg
Power of motor
Supplied with built in slip plates, recessed for turn tables and auxiliary jacking support
Cylinder located inside of the runway, perfectly protected. Electrical protection devices in
four columns ensure synchronization of runways. Adjustable runways to accommodates
different size vehicles . ABS control box, 24v low voltage control system. Hydraulic hose
and cable protection system . Single side manual lock release. Heavy duty cables, Top
limit switch. Aluminum motor with cooling fan. CE certified
5000 kg
Oil Pressure
3.0 kw
18 MPa
Power Supply
220v
Lifting time
50 s
Lowering Time
40 s
IM-6006- Auxiliary jack & cradle
3 ton capacity - Air operated
IM-6006- Auxiliary jack & cradle support
3 ton capacity - Air operated
Scoda TT - Turn Tables, Mechanical
This portable tyre changer is equipped with professional
accessories, can be operated easily without power and
pneumatic supplies. It can work for different kinds of vehicle
tyres, such as MXT, ATV, scooter, and electro mobiles. It is
perfect for family garage, racing team, long driving journey,
emergencies, and different kinds of automobile garages.
SA3TP Four Post Exhaust Lift – 3.6 ton capacity
Specifications – SA4T30
Lifting Capacity
Lifting Height
Hydraulic driven, cable lifting system. Single
side manual lock release. Four point
automatic safety locks. Width between
runways non adjustable. Integrated hydraulic
drive system. Conforms with CE requirements
Red
Product and colour may vary from pictures shown
Power of motor
Oil Pressure
3600 kg
1800 mm
2.2 kw
18 MPa
Power Supply
220v
Lifting time
50 s
Lowering Time
40 s
Page 8
IM - LR30 Low Level Lift
IM-OE Lift
Specifications
Supply voltage :
Power :
Max. lifting weight
Max. Lifting height
Lowered height
Total weight
220V
750W
2.5T
580mm
80mm
375KG
With lowest height at 120mm, This ultra-thin lifter
makes the earthwork foundation unnecessary. As
required, the lifter platform has lengthening
function that the platform length can be adjusted
automatically when lifting normal-length cars and
extra-length cars. Auxiliary accessories are
available.
IM – LR45 Heavy Duty Low Level Lift 4.5 ton
Lifting capacity:
4500KG
Max. lifting height: 580 mm
Min. height:
80 mm
Platform length:
1400 mm
Platform width:
580 mm
Product Length: 2100 mm
Product Width: 1900 mm
Scoda SCK-B30 Mid Rise Level Lift
Lifting capacity:
3000KG
Max. lifting height: 1000 mm
Min. height:
110 mm
Platform length:
1400 mm
Platform width:
490 mm
Product Length:
1900 mm
Product Width:
1780 mm
IM– ABL2 Air Bellow Low Level Lift
Lifting capacity:
2800kg
Max. lifting height: 400mm
Min. height:
120mm
Platform length:
1350mm
Platform width:
650mm
Approx. Weight:
550 kg
Air Operated
Double Air Bellow
Product and colour may vary from pictures shown
Page 9
IM- M03804 Hydraulic Motorcycle Lift
IM-SD1010ND Pneumatic Motorcycle Lift
with side ext for ATV
Lifting Capacity 360kg
Minimum Height 180mm
Max Height
680mm
NW
107kg
GW
129kg
Packing size
1980 x 580 x 260mm
Platform size
1900 x 530 mm
Hydraulic pump. Front wheel clamp for securing motorcycle
Safety bar prevents accidental falling, Adjustable foot for
stability, Removable rear loading ramp.
M806 Motorcycle Tyre Changer
Capacity:1000lbs
Min.ht:200mm
Max.ht:850mm
Platform size:2225×605mm
Ramp size:605×550mm
N.W.:165kgs
G.W.:207kgs
Package size:229×67×29.5cm
SD-12B Static Wheel Balancer
Max Wheel Diameter 960mm
Rim Width
3” – 10”
Outside Clamping
6” – 24”
Rotation Speed
7 rpm
Power
0.75 -1.1kw
Machine weight
175 kg
Specially designed tyre changer for two and four wheel
motorcycle tyres. Special Tool head designed specifically
for easy mounting & dismounting of motorcycle tyres of all
sizes. The shape of the bead breaker blade will easily
break the bead of small , narrow and standard motorcycle
tyres. The sliding clamping jaws have three positions that
will cover from 6” to 24” rims.
Specifications – SLA
Lifting Capacity
Max raised height
Min lowered height
Jack raised height
IM-SLA Wheel Alignment Scissors lift
* Robust construction and super-balanced lifts for wheel alignment. * Flush mounted or
surface mounted if access ramps equipped * Electro-hydraulic jack * Leveling controlled
2160 mm hydraulically * Mechanical safety lock with air operated engagement and release * Manual
emergency lowering * Adjustable position of turntable and longer sliding plate * Adjustable
290 mm jack frame * Limit switch for maximum lifting height * High quality hydraulic, pneumatic and
electric components
4000 kg
450mm
Runway length
4800mm
Lenth of jack frame
extended
16001800mm
Overall length
5000mm
Overall width
2050mm
Raised time
60 s
Product and colour may vary from pictures shown
Page 10
PN-8830 Nitrogen Generator
PN-8820 Nitrogen Generator
NPA - Nitrogen Purity
Analyzer
Equipped with preset and manual inflation * Two outlets for
nitrogen, this product can inflate two tyres at the same time. *
It is also equipped with an air outlet to fill air. * Equipped with
four foot casters * Generates * Nitrogen from your compressed
air *2 Pre-Filters / LED display * 55L internal Nitrogen Storage
Tank. * Remains at last setting * Audible and visual end of the
cycle signal indicators * Automatic vacuum supply and
nitrogen-fill. Power Requirement 100-240Vac 50/60Hz *
Operating Temperature -20º to 70ºC * Compressed Air Input
Range 6-8.5bar * Nitrogen Purity >97% * Nitrogen Output
70L/min @ 9bar/900kPa * Maximum Nitrogen Pressure in
Tank 800kPa/8bar * Accuracy +/-1 psi, 7 kPa, 0.07 bar * Units
of Measurement psi, kPa, bar * Suitable for cars and light
trucks, Green
PN-8850 Nitrogen Generator Cars & Light Trucks
Product Features:
Auto-start inflation * Automatic zero drift adjustment * Remains
at last setting * Audible and visual end of cycle signal indicators
* LCD display * 4 x 8m standard hoses * 4 Nitrogen outlets to fill
Nitrogen * Equipped with four foot casters * Generates Nitrogen
from your compressed air * External 120 liter nitrogen storage
tank * Power Requirement 110/240Vac / 50-60HZ * Power
Consumption 30W * Operating Temperature Range -20 C to
70C * Compressed Air Input Range 6-8.5bar / 600-850kPa *
Nitrogen Purity > 97% * Nitrogen Output 167L/min @ 9bar /
900kPa * Maximum Nitrogen Pressure 8bar / 800kPa * Nitrogen
storage Tank * External 120 liters Suitable for Cars, Light
Trucks – Color - Green
Auto-start inflation * Automatic zero drift adjustment *
Remains at last setting* Audible and visual end of the cycle
signal indicators * LCD display * 2 x 8m/26ft standard
hoses * 4 air outlets allow simultaneous inflation of up to 4
tires* Automatic Nitrogen Purge and Fill * 55L internal *
Nitrogen Storage Tank. cycle(N2P) * Power Requirement
100-240Vac 50/60Hz * Operating Temperature -20º to 70ºC
* Compressed Air Input Range 6-8.5bar * Nitrogen Purity
95-99.99% * Nitrogen Output 70L/min (2.5cfm) @
9bar/900kPa * Maximum Nitrogen Pressure in Tank
800kPa/8bar * Accuracy +/-1 psi, 7 kPa, 0.07 bar
Units of Measurement psi, kPa, bar – Green color
PN-8890 Nitrogen Generator Cars & Heavy
Trucks
Product Features:
It is equipped with an air outlet to fill air. It is equipped
with a Nitrogen outlet to fill Nitrogen * Equipped with
four foot casters * Generates Nitrogen from your
compressed air * 2 Pre-Filters * External 120 liter
nitrogen storage tank * 10m standard hose supplied *
Power Requirement 110/240Vac / 50-60HZ * Power
Consumption 25W * Operating Temperature Range 20℃C to 70℃C * Compressed Air Input Range * 6-8.5bar
/ 600-850kPa * Nitrogen Purity > 97% * Nitrogen Output
236L/min @ 9bar/900kPa * Maximum Nitrogen Pressure
10bar / 1000kPa * Nitrogen storage Tank External 120
liters * Suitable for Cars, Light Trucks, Heavy Trucks,
Color Green
Product and colour may vary from pictures shown
Page 11
Priman Preset Tyre Inflators
PA105
Power Consumption 20W, Operating
Temperature, Range: -20º C to 70º C, Max Inlet
Air/Nitrogen Supply : 15bar/1500kPa, Operating
Range : 0.3-12bar/35-1200kPa, Accuracy : ±
0.07bar/7kPa, Resolution: 0.1bar/5kPa, Units of
Measurement , PSI/bar/kPa
Dimensions(L*W*H) 360 x 360 x1260mm, Packing
Size(L*W*H) 1290 x 200mm, Net Weight 17.5kg
Gross Weight 21kg.
PA105 Feature:
Auto-start inflation, Automatic zero
drift adjustment. Remain at last
setting, Comprehensive
diagnostics and error reporting,
Audible and visual end of the cycle
signal indicators. Large backlight
LCD display, 1 x10m/32.8ft
standard hose with single clip-on
open type chuck
PA108
PA101
Same as
PA101 but can
inflate 4 tyres at
a time
Power Requirement 110/240Vac / 50-60Hz,
Power Consumption 10VA, Operating
Temperature Range -20º to 70º C, Max
Inlet Air Supply 116PSI/8bar/800kPa
Operating Range 5-102PSI/0.3-7bar/35700kPa, Over Pressure Setting Range 02bar/0-200kPa, Accuracy ± 0.07bar/7kPa,
Resolution 1PSI/0.1bar/5kPa, Units of
Measurement PSI/bar/kPa, Dimensions (L
*W*H) 230 x 120 x 290mm , Packing
Size(L*W* H) 500 x 290 x 170mm , Net
Weight 4kg, Gross Weight 6.5kg
Feature:
Adjustable Over Pressure Setting (OPS), Auto-start inflation, Automatic zero drift adjustment., Remain at last setting,
Comprehensive diagnostics and error reporting, Audible and visual end of the cycle signal indicators.
Large backlight LCD display 1 x 10m/32.8ft standard hose with single clip-on open type chuck,
Product and colour may vary from pictures shown
Page 12
SD0201 Porta Power 10 ton Capacity
IM-HM5401 Hydraulic Ram Kit
Extension tubes snap together in seconds and fit
perfectly without any tolerance. Chrome main
rams guarantee optimum lifetime. Includes
popular hydraulic ram spreader. Repairs dents
and creases in tight places. Attachments push,
pull and lift.
Capacity: 10T
Min. HT: 322mm
Stroke: 130mm
N.W.: 31.5kgs
G.W.: 32.0kgs
Packing Size: 71.5x31x16cm
2 Ton Ram
Stroke:76mm
Min. HT:139mm
10 Ton Ram
Stroke:60mm
Min. HT:118mm
10 Ton Ram
Stroke:76mm
Min. HT:139mm
10T (long)
Stroke:150mm
Min.HT:350mm
4T(long)
Stroke:132mm
Min. HT:276mm
2T(pull back ram)
Stroke:128mm
Min.HT:409mm
5T (pull back ram)
Stroke:130mm
Min.HT:483mm
IM- SD0204 Porta Power 20 ton
Capacity: 20 Ton
Min. HT: 282mm
Stroke: 128mm
N.W.(1#): 31.0kgs
G.W.(1#): 32.0kgs
Packing Size: 81x30x20.5cm
N.W.(2#):36.0kg
G.W.(2#):37.0kg
Packing size:81.5x40x11cm
Winntec Y461501 – Press, Hydraulic
15 ton Capacity
WY461501 -15 ton capacity. This press comes
standard with a two speed pump, arbor and
pressure gauge. Welded ready to use model.
Nine different height positions for securing the
table. Chrome main ram and pump pistons.
Frame height 1730mm, Frame width 740mm,
Hydraulic Stroke 195mm. Weight 131kg
SD0881 – Press Electro Hydraulic
50 ton Capacity
Capacity
50 ton
Output
1.5kW
Voltage
380v
Working Range
210 - 1050mm
Bed Width
730mm
Ram stroke
200mm
NW
287 kg
NW
85kg
GW
329kg
GW
85kg
Package size 99cm x 32cm x 211cm
34cm x 51cm x 74cm
SD0811CE-Z – Press, Pneumatic
50 ton Capacity
Ram stroke
200mm
Side Stroke
245mm
Working Range
69-1048mm
Bed Width
730mm
Air Pressure
7-8 bar
Air inlet
¼” NTP
NW
303kg
GW
345kg
Package size 98cm x 32cm x 211cm
IM-100TP – Press Electro Hydraulic
100 ton Capacity
Capacity
100 ton
Output kW
1.5kW
Voltage
380v
Working Range
177- 1017mm
Bed Width
787mm
Ram stroke
300mm
NW
680 kg
NW
75kg
GW
735kg
GW
88kg
Package size 114cm x 40cm x 211cm
37cm x 53cm x 79cm
Product and colour may vary from pictures shown
Page 13
Junior Rim Straightening Machine
Konig 5700 Rim Straightner with Lathe
Pressing positions
Standard accessories
The Atek Junior Rim repair machine is designed to
repair all rims between 10” and 24” with the aid of a
hydraulic piston. The unit is supplied with various
spacers, nuts and bolts to enable the user to mount
the wheel for repairs. A pointer is supplied to aid the
user in identifying dents and other imperfections on
the rims.
Rim diameter 10” – 24”
Working Pressure : 140 bar
• Net weight : 178 kg
• Hydraulic Motor : 0,55 kW / 0,75 hp
Polish - Cln Rim Polisher
The Konig 5700 Rim repair machine is designed to repair all
rims between 10” and 24” with the aid of a hydraulic piston
and a cleaning lathe. Rims can be returned to their original
condition in minutes.
The Konig 5700 is accompanied by various spacers, nuts and
bolts to enable the user to mount any wheel for repairs. An
electro magnetic pointer is supplied to aid the user in
identifying dents and other imperfections on the rims.
Rim diameter 10” – 24”
Working Pressure : 140 bar
• Net weight : 362 kg
• Hydraulic Motor : 0,55 kW / 0,75 hp
• Working Motor : 0,75kW / 1,00 hp
• Rotating Speed 250 RPM
RP2012 - Rim Polisher
Optional Polisher for Atek
5700 Rim Repair Machine
IM-RPK Rim Polish Kit
Standard Accessories: 5 Piece polishing and
cleaning brushes
Technical Specifications:
Rim Diameter
12” - 28”
Polishing brush size
Min 100 x 50 / Max 400 x 50
Rotating Speed
1400rpm
Air working Pressure 8 -10 bar
Polishing working motor 1,5 kW / 1400rpm
Rim rotating motor
0.55kW / 1400rpm
Nett Weight
115 kg
3 phase electric Motor
Product and colour may vary from pictures shown
Page 14
Tool Trolley / Cabinets
Safety lock system prevents the drawers from opening accidentally, Lateral plates with peg panel design for hanging tools and
various items, Replaceable name tag, heavy duty caster with two-way brake.
IM-807
450kg Overall Loading Capacity
Dimensions 865mm x 570mm x 1000mm
Weight 70kg
SD18 Tyre Changer - Manual
Manual Tyre changer.
Four jaw system that is
hand operated.
Turntable and bead
breaker. Swing arm
type.
Technical Data
Motorcycle tire size 5”‐22”
Car tire size 9”‐20”
Weight 34.5KG
These manual tyre changers is equipped with professional
accessories, that can be operated easily without power and
pneumatic supplies. It can work for different kinds of tyres, such
as MXT, ATV, scooter, and electro mobiles. It is perfect for family
garage, racing team, long driving journey, emergencies, and
different kinds of automobile garages.
Product and colour may vary from pictures shown
Page 15
M806 Motorcycle Tyre Changer
Max Wheel Diameter 960mm
Rim Width
3” – 10”
Outside Clamping
6” – 24”
Rotation Speed
7 rpm
Power
0.75 -1.1kw
Machine weight
175 kg
Specially designed tyre changer for two and four wheel
motorcycle tyres. Special Tool head designed specifically
for easy mounting & dismounting of motorcycle tyres of all
sizes. The shape of the bead breaker blade will easily
break the bead of small , narrow and standard motorcycle
tyres. The sliding clamping jaws have three positions that
will cover from 6” to 24” rims.
LC810G Semi Automatic Tyre Changer
Semi automatic tyre changer with swing arm.
High quality mount/demount foot . Mag protectors
for foot and claws. Water trap & oiler. Stainless
steal bead breaking cylinder.
Optional Motor cycle / ATV adaptor available.
Max Wheel Diameter 1000mm
Rim Width
4” - 12”
Inside Clamping
12” - 24”
Outside Clamping
10” - 20”
Power
0.75 -1.1kw
Rotation Speed
7 rpm
Machine weight
175 kg
Bright 890PSemi Auto Tyre Changer with Help Arm
Max Wheel Diameter
1250mm – 49”
Max Wheel Width
400mm – 16”
Outside Rim Dia
10-20”
Inside Rim Dia
12-23”
Machine Height (excluding arm)
2040mm
Machine length 1135mm (excluding arm) 1135mm
Machine width (excluding arm)
870mm
Nett Weight (excluding arm)
233kg
Operating Pressure
8-10bar
Motor
1.1kw / 0.75kw
Power
220v / 380v
Turn Table Speed
6rpm
Noise
< 70dB
22 inch arc turntable adjustable can handle tire with the rim diameter of
10-26inch.
Standard accessories：
1-turntable protect plate：protect rim to avoid the rim being scratched by
the turntable. There is scale on the guard plate for the convenience to fix
the tire；
2-Clamping jaw protect cover：Inward clamping protect the Alu alloy rim
to prevent the rim damage
LC887ITS
Automatic Lever-less Tyre Changer
Technical parameter：
Max. wheel diameter ：1040mm
Tire width ：3”-15”
Rim diameter ：10”-24”/13”-26”
Work air pressure ： 8-10bar
Turntable speed ： 7-14rpm
Voltage ：110V-220V-380V
Power ：0.75/1.1Kw
Product and colour may vary from pictures shown
Page 16
887 Automatic Tyre Changer
Max Wheel Diameter 1030mm
Rim Width
3” - 15”
Inside Clamping
13” -26”
Outside Clamping
10” - 24”
Power
0.75-1.1kw
Machine weight
260 kg
Speed Rotation
7 rpm
AL320B Help Arm
Automatic tyre changer with rear tilting arm. Pneumatic column lock. Mag protectors for foot and claws. Water trap and oiler.
Stainless steal bead breaking cylinder. Turn tables equipped with a protective cover. 80MM Turn tables cylinder increases clamp
force. The design of the bead breaking blade rotates enabling best bead breaking force.
Optional: Help arm for low profile tyres
LC588 Truck Tyre Changer
Max Wheel Diameter
Wheel Width
Power Requirements
Internal Clamping
Working Pressure
Machine weight
LC590 Truck and OTR Tyre Changer
Max Wheel Diameter 2200mm
Wheel Width
1100mm
Internal Clamping
14” -56”
Working Pressure
150 bar
Machine weight
987 kg
1500mm
1000mm
1.8kw
14” -26”
150 bar
561 kg
CB910GB Wheel Balancer
CB460B Truck / Car Wheel Balancer
3D Automatic measurement
Multi-balancing modes
Foot Brake Brake
Up to 4 user modes
Alu Split weight program
LCD Display
Statistical Analysis
Lazer Scale
Max Wheel Diameter 1000mm
Wheel Width
20”
Max Wheel Weight
65kg
Accuracy
1g
Rotation Speed
200rpm
Motor
0.25kW
Power Requirements 220v/1ph
Machine weight
110 kg
Manual data input
Product and colour may vary from pictures shown
Max Wheel Diameter 1200mm
Wheel Width
20”
Max Wheel Weight
200kg
Accuracy
1g
Rotation Speed
100/200rpm
Power
0.55kw
Machine weight
269 kg
Equipped with a Wheel Lift
Page 17
CB66 Smart Robot Wheel Balancer
1.Italian engineering software wheel balancer.
2.Five Alu modes and with wheel optimization
mode and weight split( Hidden weight)
function.
3.Standard 40mm threaded shaft, which can
work with international standardized balancer
accessories. Main shaft flange and threaded
shaft threads which have been processed
through supersonic quenching treatment. It is
strong and endurable.
4.Machine calibration is easy to operate, which
can restore machine's precision quickly.
5.Optional motorcycle balancing adapter kit is
available. With motorcycle balancing mode.
1.Italian engineering software wheel balancer.
2.Automatic measurement and input of Distance and
Diameter( DIS&DIA), with 5 ALU modes and 2 ALU Smart
modes. With wheel optimization mode and wheel split and
(Hidden weight) function.
3.Standard 40mm threaded shaft, which can work with
international standardized balancer accessories. Main shaft
flange and threaded shaft threads which have been
processed through supersonic quenching treatment. It is
strong and endurable.
4.Optional motorcycle balancing adapter kit is available. With
motorcycle balancing mode.
5. With technical patent of weight position marking.
6.Machine calibration is easy to operate, which can restore
machine's precision quickly.
7.With standard USB port. It is convenient to Upgrade the
newer software.
8. Display type: LED .
9.With foot pedal design, when clamping or sticking on the
weight more precisely.
10.With power-saving mode, machine comes into standby
mode automatically if t
CB67 Smart Robot Wheel Balancer
CB68 Smart Robot Wheel Balancer
1.Italian engineering software wheel balancer.
2.Wheel three parameters fully automatic measurement & input. with 5 ALU
modes and 2 ALU Smart modes. With wheel optimization mode and wheel
split and (Hidden weight) function.
3.Standard 40mm threaded shaft, which can work with international
standardized balancer accessories. Main shaft flange and threaded shaft
threads which have been processed through supersonic quenching
treatment. It is strong and endurable.
4.With technical patent of weight position marking.
5.Machine calibration is easy to operate, which can restore machine's
precision quickly.
6.Optional motorcycle balancing adapter kit is available. With motorcycle
balancing mode.
7.With standard USB port. It is convenient to Upgrade the newer software.
8.Display type: LED .
9.With foot pedal design, when clamping or sticking on the weight more
precisely.
10.With power-saving mode, machine comes into standby mode
automatically if the machine is not being in use after 5 minutes.
11.Electromaget automatic position brake function.
12.With LED side lamp illuminator. It is more visible in operation.
Product and colour may vary from pictures shown
Page 18
IM-QD52 Pneumatic
Tyre Spreader
IM- SD-2 Manual Tyre Spreader
Features
The hook can be adjusted according to the
tyre width for medium-sized and small
tyres.
The operating platform can be turned to
any place with ideal light during tyre
repairing.
Pneumatic upright tyre spreader for cars, light trucks
and minibuses tyres. It is designed for locking and
subsequent spreading of tyres. The machine allows
performing such functions as inspection, sanding,
polishing, dust extraction and patching. The machine
is operated by way of two rubber coated foot
pedals.(Air required). Tyre width: 100-375mm
IM- One side lifter
DB-88 Overturn Vulcanizing Machine
DB-88 Features
It can vulcanize any part of model 750-16 to
model 1000-20 tires in single surface or double
surfaces. It can maintain constant temperature
automatically to ensure the temperature
required during tire vulcanization. It can raise,
lower or overturn the operating bracket to
vulcanize according to the repair position of the
tires of different models. It is equipped with five
moulds in different angle and a purpose made
heat conduct sand bag, which can ensure the
repaired tire more conforms to the normal
condition
IM-FY200 (FYMIG5320) Multi
function Mig /Mag Welder
One column electric lift - Screw elevation
system with no fixed position, Mobile Easy to use - Under wheel support Under car base (sill) with 2 fixing
systems, 220v, Suitable for lifting cars up
to 2500kg, Lifting time for maximum
range: 35 seconds
Maximum height of lifting 1000mm
IM-PW150 High Pressure Cleaner
Power 3Kw
Voltage 380v
R.P.M. 1450 r/min
Flow rate: 9.2 L/min
Max Pressure: 150bar
Suction Lift : 3m
Spray Range:10m
Weight: 45kg
Packing Dimensions: 690 x
400 x 500mm
Input voltage: 380v or 220v. Rated input power: 11kva, input
current 17 A (35a/15.7v – 320A/33v, Duty Cycle: 250A/100% 320A/65%) Frequency 60-1200kHz, Steel wire diameter 0.61.2mm, Alu alloy wire diameter 0.8-1.2mm, Copper alloy wire
diameter, 0.6-1.6mm, Wire feeder, Two way dual drive
The pressure washer is supplied with five spray nozzles.
Each nozzle is colour coded and delivers a specific
o
o
o
o
spray pattern. The 0 , 15 , 25 and 40 nozzles are high
pressure nozzles and the chemical nozzle is a low
pressure nozzle.
Product and colour may vary from pictures shown
Page 19
Lawrence 3D wheel alignment machine
i5
Exquisite movable small cabinet, Height adjustable ruggedized pole, Height Performance computer, 22” LCD monitor, Special
target disk, Deluxe clamping wheel clamps, High definition camera, Steering wheel lock, Brake lock, Wedge shaped pads, turn
tables, Filler plates for turn tables, Printer and Speaker
• 3D max dynamic display system
• No electronic components
• Four – point wheel clamps
• High- speed 3D animation techniques
• Reminding window
• Pre-tightening rotatable jaw
• Pushing the vehicle once
• 3D Animated adjustment guidance
• Animated operation reminding
• Original standard database
• Camera showing vehicle on platform
• Intelligent voice reminding
• Camera and kingpin inclination measurement
•Vehicle body dimension measurement
•Toe out on turn measurement
•Maximum steering measurement
•Tyre diameter measurement
Jevol RST1600 / RST 1500 Suspension Tester
This Ultra-Thin suspension tester is easy to use and
designed to be placed on top of the ground or
recessed. It is recommended to bolt the unit down,
with the wiring fixed or placed in such a way not to get
damaged. Drive on ramps can accommodate vehicles
up to 80mm ground clearance. This unit comes
complete with a PC (all software pre installed), Screen
and printer placed into a stylish, lockable cabinet. This
suspension tester check the vehicle’s road grip and
shock absorber performance according to EUSAMA
specifications. It has a auto stop function in case of
overload and is designed to use the highest real road
vibrations to ensure accurate testing with a low noise
design.
EUSAMA = European Shock Absorbers. Manufacturers
Association
BRIGHT SAT – Shock Absorber Tester
The tester mainly test low-frequency mechanical
vibration, which make use of ultrasonic telemeter
principle to detect the movement through a
calculated analysis to make the wave re-appear and
evaluate its relevant performance. Test Cycle 3
seconds per wheel. Oscillation displayed as a wave.
Detect distance 0.25m – 1.5 meter. Measurement
distinguishing rate 0.3mm . Results printed on
Thermal printer. Charger: 12v/1A +/-10% output.
Charging time: 5-6 hours
Main Unit dimensions:
Weight:
Power Supply:
Power Consumption:
Hours of operation:
Product and colour may vary from pictures shown
161 x 88 x 48.5 mm
340g
8.4 V Battery
35mA
(without printing)
48 hours
(without printing)
Page 20
Screw Compressor
Type: AA-SCP1.1/8
Motor
7.5kW/10HP
Voltage
380v/50Hz/3PH
Capacity(m3/min) 1.1
Working Pressure 8 bar
Weight
240 Kg
Dimensions
890 x 630 x 920mm
Air Dryer
Type: AA-10A
Motor
1kW
Voltage
2200v/50Hz/1PH
Capacity(m3/min) 1.5
Working Pressure 8 bar
Weight
40 Kg
Dimensions
700 x 420 x 760mm
Tank
Main Filter
Type: QPS015 (3 Pcs)
Capacity(m3/min) 1.5
Working Pressure 8 bar
Weight
1.2kg
Height
267.5mm
Truck wheel dolly - 500kg
Type: 0.6/8
Motor
1kW
Capacity(m3/min) 0.6
Working Pressure 8 bar
Height
1905mm
Truck wheel dolly – Heavy Duty
Wheel dolly – roll, lift, twist, lower. Easy installation and de-installation of truck wheel assemblies.1 man control, Heavy-duty industrial bearings. 3
positions for rollers depending on size of wheel. Great tool for every service truck. Avoid damage to wheel bolts and expensive modern rims. For
all wheels from 6,5 – 22,5
Product and colour may vary from pictures shown
Contact Persons
Hugo Deveugele
Director
Edgar Julyan
Fred van Zyl
Accounts & Stock
Marketing & Technical
Frans
Belinah
Store room
Housekeeper
Tel: 012 664 3556