Hazards

advertisement
Risk assessment for working with contractors
Hazards
Fire caused by smoking
Electric voltage
Damage to structural elements due to
electrostatic discharge
Dust- and steam-generating work or hot
work
Damage to or false triggering of the fire
alarm system
Damage to the sprinkler system (water
damage)
Damage to the building sanitary or cooling
system (water damage)
Unforeseeable hazards
Safety measures
A general smoking ban is in effect. Smoking is allowed only in
designated smoking areas.
Work supervisors must ensure the absence of voltage during all
contract work in the work area.
Train contractor / subcontractor
(explain and monitor compliance with ESD provisions)
Obtain welding approval so that the affected section of the fire
alarm system can be switched off
Train contractor / subcontractor
(show affected fire alarm system components)
Train contractor / subcontractor
(show affected sprinkler system components)
Train contractor / subcontractor
(show affected system parts, provide necessary plans)
Perform last minute risk assessment (e.g., STOP & Check)
Work to be performed
Location of work to be performed
Start of work
End of work
Client/Owner
Company name, address
Location, date
Name and signature
Client/planner/Construction Manager Point of Contact
Company name, address
Location, date
Name and signature
Contractor/Subcontractor
For more complex hazard identification
processes
Fill out Safety and Health Protection Plan Form for
Construction Sites (SiGe-Bau)
Company name, address
http://www.suva.ch/sigebau
http://www.suva.ch/startseite-suva/service-suva/tools-testssuva/bau/sicherheits-gesundheitsschutzplansuva.htm?WT.mc_id=shortcut_sigebau
Location, date
Name and signature
Project
Issued by:
Rev./Appr.
by:
Remo Küry
Remo Küry
CH-SA
CH-SA
2015-04-21
Risk assessment for working with contractors
2015-04-21
Document No.
ABB Switzerland
No. of Pages
1
Language
Revision
Page
en
c
1
Download