WARSAW UNIVERSITY OF TECHNOLOGY - partner
BASIC INFORMATION
Warsaw University of Technology
provides technical education since 1826
State university with higher education at 16 faculties:
- Faculty of Architecture
- Faculty of Chemical and Process Engineering
- Faculty of Chemistry
- Faculty of Civil Engineering
- Faculty of Electrical Engineering
- Faculty of Electronics and Information Technology
- Faculty of Environmental Engineering
- Faculty of Geodesy and Cartography
- Faculty of Mathematics and Information Science
- Faculty of Physics
- Faculty of Power and Aeronautical Engineering
- Faculty of Transport
- Faculty of Automobiles and Heavy Machinery Engineering
- Faculty of Materials Science and Engineering
- Faculty of Mechatronics
- Faculty of Production Engineering
Number of students: 30 000
http://www.pw.edu.pl
WARSAW UNIVERSITY OF TECHNOLOGY - partner
FACULTY OF POWER AND AERONAUTICAL ENGINEERING
Selected activities
•
CFD – Computational Fluid Dynamics
•
Flight Control and Navigation Systems
•
CAD / Unigraphics– Computer Aided
Design
•
Strength and Thermal Analysis of
Structures
•
Crash testing and analysis
•
Aircraft design and optimisation
WARSAW UNIVERSITY OF TECHNOLOGY - partner
FACULTY OF POWER AND AERONAUTICAL ENGINEERING
Scope of activities
Accurate prediction of flows in industrial applications
Simulation of flows in regions with moving and free boundaries
Grid generation and adaptation
Fundamental aspects of CFD
CFD in low-speed aerodynamics
Aeroelasticity
Staff
2 Professors (J. Rokicki, A. Styczek)
3 Senior researchers
7 Ph.D. students
Computer Equipment
Mini-supercomputer COMPAQ ES-40, 4 processors, 667 MHz, 3 GB RAM, 72 GB HD.
Gigabit cluster, 16 nodes (2.0GHz, 1.5GB RAM, 40GB HD at each node)
Ithanium 2, cluster, 6 nodes (1.4GHz, 4GB RAM, 40GB HD at each node)
Three general purpose computer labs (30 PCs in total).
Privileged access to the new CLUSTERIX grid-computing facility (200 Ithanium nodes)
WARSAW UNIVERSITY OF TECHNOLOGY - partner
FACULTY OF POWER AND AERONAUTICAL ENGINEERING
Department of Automation and Aeronautical Systems
Scope of activities
Staff
Avionics and Aeronautical Systems
1 professor
Navigation systems
4 associate prof
Signal processing
4 Ph.D. Students
System integration
Flight control systems, fly-by wire systems
Rotorcraft Aeromechanics
Flight mechanics: simulation, stability, control
Software available
FLIGHTLAB - Commercial software used to the modeling, analysis, validation, and
real-time simulation of highly complex, nonlinear, multi-body dynamic systems:
aircraft, land vehicles
General model of mobile objects - generic software in Matlab for modeling of mobile
objects: land vehicles, sea vessels
Home developed software - tilt rotor dynamics
Equipment
Various sensors for inertial navigation systems
GPS receivers with RTK and DGPS options
Research land vehicle
WARSAW UNIVERSITY OF TECHNOLOGY - partner
FACULTY OF POWER AND AERONAUTICAL ENGINEERING
Research Team for
Numerical Methods in Mechanics of Structures
Scope of activities
• research and design in FEM modelling - 2D, 3D
• stress analysis
• heat transfer and thermal stress
• modeling of coupled fields
• nonlinear structural mechanics (including buckling)
• dynamic analysis: eigenmodes and frequencies, transient
response
• optimization techniques
• high level courses in the FEM
Hardware / Software
• ANSYS System,
• licenses for FEM codes
• computer lab with flexible number of stands
Staff
1 professor
3 associate professors
Contact person
1 assistant professor
Prof. Tomasz Zagrajek, email:tzagra@meil.pw.edu.pl
2 Ph.D. students
WARSAW UNIVERSITY OF TECHNOLOGY - partner
FACULTY OF POWER AND AERONAUTICAL ENGINEERING
Unigraphics Competence Centre
Partner of EDS Unigraphics Poland (now: Unigraphics Solutions) and Hewlett Packard Poland
Scope of activities
Training and consulting services in Unigraphics v. NX 3 (also v. NX1 and NX2)
usage of the CAD, CAE and CAM modules
dedicated courses with customised programs
transition from 2D to 3D documentation and modelling
Sample courses of Unigraphics NX 3 offered
3D modelling and preparing 2D drawings (drafting)
Computer Aided Engineering (CAE-FEM)
Manufacturing (CAM)
Authorised Certificates
From 01/07/2005, the Centre will issue Certificates authorised by the Unigraphics Solutions.
Highly qualified staff
The team of 10 persons (professors and researchers) working with the use of UG for 11 years.
From 01/10/2005 all will have the instructor certificates granted by the UG Solutions.
Equipment available
computer lab with flexible number of stands; up to 12 high performance PCs, multi-media
projector connected to additional PC used by the instructor during teaching.
Contact: Prof. S. Bogdański, CentrumUG@meil.pw.edu.pl
WARSAW UNIVERSITY OF TECHNOLOGY - partner
FACULTY OF POWER AND AERONAUTICAL ENGINEERING
Laboratory of Integrated CAD/CAM/CAE Systems
Partner of IBM Poland
Scope of activities
Training and consulting services in CATIA v. 5
usage of the CAD, CAE modules
dedicated courses with customised programs
transition from 2D to 3D documentation and modelling
Sample courses of CATIA V 5.14 offered
3D modelling and preparing 2D drawings (drafting)
Computer Aided Engineering (CAE-FEM)
Highly qualified staff
The team of 8 persons (professors and researchers) working with the use of
CATIA for 3 years.
Equipment available
computer lab with 13 high performance PCs, multi-media projector
Contact: PracowniaZSCAD@meil.pw.edu.pl
WARSAW UNIVERSITY OF TECHNOLOGY - partner
FACULTY OF POWER AND AERONAUTICAL ENGINEERING
Scope of activities
Biomechanics of impacts
Accidents virtual reconstruction and computer simulation
Vehicle passive safety
Road and air crashworthiness
Biomechanics of sport
Crash dummies computer models development
Hardware / equipment
2 high-speed (1000fps) video cameras
Computers: multiprocessor cluster
& many modern single-processor PC machines
Software available
MADYMO (hybrid FEM & multi-body dynamic system simulation tool)
SolidWorks (3D modeller)
HyperWorks (FEM mesh generator, pre- & postprocessor)
ADVISER (signal evaluation tool)
Staff: 3 Associate Professors + 8 PhD students
Contact Person: Dr. Cezary Rzymkowski, e-mail: czarek@meil.pw.edu.pl
WARSAW UNIVERSITY OF TECHNOLOGY - partner
FACULTY OF POWER AND AERONAUTICAL ENGINEERING
Department of Airplane and Helicopter Design
Scope of activities
Aircraft design and optimisation
UAV design, integration and production
Micro and Mini Aerial Vehicles research and design
On-board equipment integration
Carbon fibre structure design and production
Aircraft structure design and assembling
Staff (highly experienced in international design and research projects):
professors, Ph.D. students, technicians, industrial designers
Laboratories and software
Composite structure lab and workshop, Fatigue lab, Unigraphics,
VSAERO, STB (Stability analysis software), Instron
Contact Person
Prof. Zdobyslaw Goraj (goraj@ meil.pw.edu.pl), +4822-622-4374
Potencjał
i tematyka
WARSAW UNIVERSITY
OFludzki
TECHNOLOGY
- partner badawcza
Research
staff and research areas
INSTITUTE OF MANUFACTURING TECHNOLOGY
Research Fields
Manufacturing Systems: automation of manufacturing systems, mobile robots,
distributed control systems, work organization on shop floor, manufacturing systems
design.
Manufacturing Process: tool condition monitoring, cutting processes optimization,
special tools design, non conventional machining (EDM, WEDM, ECM etc) and fine
processes development, metrology, Statistical Process Control.
Machine-tools Design: design and optimization of machine tools and its
components, including driving systems, monitoring, supervision and performance
evaluation of machine-tools.
52 employees
7 professors, 15 PhD
WARSAW UNIVERSITY OF TECHNOLOGY - partner
INSTITUTE OF MANUFACTURING TECHNOLOGY
Laboratory equipment and research teams of
Warsaw University of Technology –
Institute of Manufacturing Technology
WARSAW UNIVERSITY OF TECHNOLOGY - partner
INSTITUTE OF MANUFACTURING TECHNOLOGY
Several machine tools both conventional and numerically controlled…
...also for Electrical Discharge Machining (EDM&WEDM)
WARSAW UNIVERSITY OF TECHNOLOGY - partner
INSTITUTE OF MANUFACTURING TECHNOLOGY
Numerous cutting force, vibration, AE, sound, displacement and temperature
sensors with software for analysis of the phenomena
WARSAW UNIVERSITY OF TECHNOLOGY - partner
INSTITUTE OF MANUFACTURING TECHNOLOGY
Prototypes of TCM systems in hardware and virtual versions
WARSAW UNIVERSITY OF TECHNOLOGY - partner
INSTITUTE OF MANUFACTURING TECHNOLOGY
Numerous DAQ devices and software for signal processing
5MHz