Overview of Tools and its types Lineman's Pliers Side Cutters Cable Cutters Heavy duty pliers for Used on smaller wires More powerful than or to cut tie wraps general use in regular pliers used to bending, cutting, cut large conductors crimping and pulling and smaller cable Crimping Pliers Used to install butt splices and stakons wire Vice Grips Comes in handy as an extra grip support Wire Strippers Electrician Scissors Available in many Used for cutting thick different sizes used to gauged wire strip the insulation Hex Keys Metric Used to tighten electrical termination lugs from the wire without damaging the wire Tape Measure Electrician Hammer Crescent Wrench Hack Saw Handy when nut size Used to cut strut, Hammer/Pry nails, beat sh*t Used for measuring strut, conduit and isn't known, this set tray has good jaws that conduit and cable won't lock up Needle Nose Pliers Torpedo Level Tri-Square Tin Snips Used to cut straight edge in sheet metal Used for gripping in Magnetized for Used to make tight spaces convenience and accurate cut lines for accurate readings a straight edge Channel Locks Socket Set Wrench Set Nut Drivers Used to tighten Most commonly used Speed wrenches are Used where a wrench conduit, conduit sizes are 3/8, 7/16, well worth it, most can't, most common fittings, gang boxes 1/2, 9/16 commonly used 7/16, sizes 1/4-5/16- 1/2, 9/16 7/16- 1/2- 9/16 Banana Knife Muiltimeter and connectors, three different sizes is great to have Flat And Phillip Heads Robertson Head This set includes 3 different sizes and two really short ones, for those hard to get to areas Square head, common Used to strip cable sizes 1,2,3 and insulation Can test volts AC/DC, Amps, and resistance. (Note this may not be required until 3rd year but is very handy to have even as a 1st year)