E
Faculty of
NGINEERIN G
Outcome Based Education (OBE) system
Getting to know the mapping of Programme Outcomes (POs),
Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree
B.Eng. (Hons) Electrical
Vision
To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of
knowledge workers for nation building, and providing continuous technical support for the ICT industry in
Malaysia
M1. To produce multiskilled graduates who
are able to spearhead
nation-building in the
Information Age
M2. To provide opportunities and
resources for academic and
researchers to carry out the
state-of-the-art research and
development work
PO1
PO2
PO3
PO4
PO5
PO6
PO7
PO8
PO9
PO10
Mission
PEO
PEO2. To develop technical leaders who
understand the power systems and
related industry needs of the country
(Related to M1 & M3)
PEO1. To produce highly
competent engineers in
electrical engineering
(Related to M1 & M2)
PO
M3. To support the growth of
nationwide ICT industry through
provision of continuous
professional development of
knowledge
PO11
Description of how POs (Programme Outcomes) are linked to the PEOs
PO1
Ability to acquire and apply fundamental principles of science and engineering
- The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology
- This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and support the
development of engineering practices in the industries in Malaysia
- Related to PEO 1
PO2
Capability to communicate effectively
- Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational
- To be a good leader, effective communication is a must
- Related to PEOs 1 and 2
PO3
Acquisition of technical competence in specialised areas of engineering discipline
- The graduates have been prepared with comprehensive knowledge in the field of electrical engineering and trained with practical laboratory experiments
- The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems
- Related to PEOs 1 and 2
PO4
Ability to identify, formulate and model problems and find engineering solutions based on a systems approach
- To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach
- Related to PEOs 1 and 2
PO5
Ability to conduct investigation and research on engineering problems in a chosen field of study
-The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions
-The graduates will be able to tackle on problems and improvement by conducting research in the field of electrical engineering and this will equip them with the capability of becoming
not only as an engineer but also a researcher in developing new technologies
- Related to PEO 1
PO6
Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions
- As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure the design is cost-effective, reliable, and has a great sustainability
- Related to PEO 2
PO7
Understanding and commitment to professional and ethical responsibilities
- The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical
responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues
- Related to PEOs 1 and 2
PO8
Ability to work effectively as an individual, and as a member/leader in a team
- In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently but
also as a part of a team
-Related to PEOs 1 and 2
PO9
Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills
- In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management,
leadership and entrepreneurial skills
- Related to PEOs 1 and 2
PO10
Awareness of the social, cultural, global and environmental responsibilities as an engineer
- The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental responsibilities and
the need for sustainable development
- Related to PEO 2
PO11
Capability and enthusiasm for self-improvement through continuous professional development and life-long learning
- The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development and
life-long learning
- Related to PEOs 1 and 2
E
Faculty of
NGINEERIN G
Outcome Based Education (OBE) system
Getting to know the mapping of Programme Outcomes (POs),
Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree
B.Eng. (Hons) Electronics
Vision
To be a leading engineering faculty for creation, preservation and dissemination of
knowledge, training of knowledge workers for nation building, and providing continuous
technical support for the ICT industry in Malaysia
M1. To produce multi-skilled graduates
who are able to spearhead nationbuilding in the Information Age
M2. To provide opportunities and
resources for academic and researchers
to carry out the state-of-the-art research
and development work
M3. To support the growth of nationwide ICT
industry through provision of continuous
professional development of knowledge
Mission
PEO1. To develop competent engineers and technical leaders to support the electronic
industry especially in manufacturing, design and R&D in microelectronics
(Related to M1& M2 & M3)
PO
PO1
PO2
PO3
PO4
PO5
PO6
PO7
PO8
PO9
PEO
PO10
PO11
Description of how POs (Programme Outcomes) are linked to the PEOs
PO1
Ability to acquire and apply fundamental principles of science and engineering
- The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology
- This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead,
facilitate and support the development of engineering practices in the industries in Malaysia
PO2
Capability to communicate effectively
- Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational
- To be a good leader, effective communication is a must
PO3
Acquisition of technical competence in specialised areas of engineering discipline
- The graduates have been prepared with comprehensive knowledge in the field of electronics engineering and trained with practical laboratory experiments
- The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems
PO4
Ability to identify, formulate and model problems and find engineering solutions based on a systems approach
- To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a
systems approach
PO5
Ability to conduct investigation and research on engineering problems in a chosen field of study
- The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical
engineering solutions
- The graduates will be able to tackle problems and suggest improvements by conducting research in the fields of electronics engineering and this will equip
them with the capability of becoming not only an engineer but also as a researcher in developing new technologies
PO6
Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions
- As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and
sustainable
PO7
Understanding and commitment to professional and ethical responsibilities
- The graduates are made aware of the need to implement and develop technology through good engineering conduct
- With the additional commitment towards professional and ethical responsibilities, the graduates will be elevated in terms of attitude and awareness towards
ethical issues
PO8
Ability to work effectively as an individual, and as a member/leader in a team
- The development of an outstanding leader will come with good team work and thus the Programme is aimed at producing an engineer who is not only capable
of working independently but also as a part of a team
PO9
Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills
- In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical
knowledge, management, leadership and entrepreneurial skills
PO10 Awareness of the social, cultural, global and environmental responsibilities as an engineer
- The graduates are to be made aware of, and understand their roles as engineers in the society. These include the awareness of the social, cultural, global and
environmental responsibilities and the need for sustainable development
PO11 Capability and enthusiasm for self-improvement through continuous professional development and life-long learning
- The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing
professional development and life-long learning
Faculty of
E
NGINEERIN G
Outcome Based Education (OBE) system
Getting to know the mapping of Programme Outcomes (POs),
Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree
B.Eng. (Hons) Electronics majoring in Computer
Vision
To be a leading engineering faculty for creation, preservation and dissemination of knowledge,
training of knowledge workers for nation building, and providing continuous technical support for the
ICT industry in Malaysia
Mission
M1. To produce multi-skilled
graduates who are able to
spearhead nation-building in
the Information Age
M2. To provide opportunities and
resources for academic and
researchers to carry out the state-ofthe-art research and development work
PEO1. To train and nurture
competent technical and engineering
leaders in support of the activities in
the computer / computing industry
(Related to M1 & M3)
PO
PO1
PO2
PO3
PO4
PO5
M3. To support the growth of
nationwide ICT industry through
provision of continuous professional
development of knowledge
P
E
O
PEO2. To produce versatile engineers
with the ability to consistently
synthesise new technologies in the
computer/computing sector
(Related to M1 & M2)
PO6
PO7
PO8
PO9
PO10
PO11
Description of how POs (Programme Outcomes) are linked to the PEOs
PO1
Ability to acquire and apply fundamental principles of science and engineering
- The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology
- This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and
support the development of engineering practices in the industries in Malaysia
- Related to PEO 1
PO2
Capability to communicate effectively
- Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational
- To be a good leader, effective communication is a must
- Related to PEOs 1 and 2
PO3
Acquisition of technical competence in specialised areas of engineering discipline
- The graduates have been prepared with comprehensive knowledge in the field of computer engineering as well as trained with practical laboratory experiments
- The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems
- Related to PEOs 1 and 2
PO4
Ability to identify, formulate and model problems and find engineering solutions based on a systems approach
- To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach
- Related to PEOs 1 and 2
PO5
Ability to conduct investigation and research on engineering problems in a chosen field of study
-The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions
-The graduates will be able to tackle on problems and improvement by conducting research in the field of computer engineering and this will equip them with the capability of
becoming not only as an engineer but also a researcher in developing new technologies
- Related to PEO 1
PO6
Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions
- As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and sustainable
- Related to PEO 2
PO7
Understanding and commitment to professional and ethical responsibilities
- The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical
responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues
- Related to PEOs 1 and 2
PO8
Ability to work effectively as an individual, and as a member/leader in a team
- In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently
but also as a part of a team
-Related to PEOs 1 and 2
PO9
Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills
- In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management,
leadership and entrepreneurial skills
- Related to PEOs 1 and 2
PO10
Awareness of the social, cultural, global and environmental responsibilities as an engineer
- The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental
responsibilities and the need for sustainable development
- Related to PEO 2
PO11
Capability and enthusiasm for self-improvement through continuous professional development and life-long learning
- The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development
and life-long learning
- Related to PEOs 1 and 2
Faculty of
E
NGINEERIN G
Outcome Based Education (OBE) system
Getting to know the mapping of Programme Outcomes (POs),
Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree
B.Eng. (Hons) Electronics majoring in Multimedia
To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of
knowledge workers for nation building, and providing continuous technical support for the ICT industry in
Malaysia
Mission
Vision
M1. To produce multi-skilled
graduates who are able to
spearhead nation-building in
the Information Age
PEO
PO
PO1
M2. To provide opportunities and
resources for academic and
researchers to carry out the state-ofthe-art research and development work
PEO2. To produce versatile engineers
with the ability to consistently
synthesise new technologies in the
electronics and multimedia engineering
sector (Related to M1 & M2)
PEO1. To train and nurture competent
technical and engineering leaders in
support of the activities in the electronics
and multimedia engineering industry
(Related to M1 & M3)
PO2
PO3
PO4
PO5
M3. To support the growth of
nationwide ICT industry through
provision of continuous professional
development of knowledge
PO6
PO7
PO8
PO9
PO10
PO11
Description of how POs (Programme Outcomes) are linked to the PEOs
PO1
Ability to acquire and apply fundamental principles of science and engineering
- The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology
- This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and
support the development of engineering practices in the industries in Malaysia
- Related to PEO 1
PO2
Capability to communicate effectively
- Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational
- To be a good leader, effective communication is a must
- Related to PEOs 1 and 2
PO3
Acquisition of technical competence in specialised areas of engineering discipline
- The graduates have been prepared with comprehensive knowledge in the field of multimedia engineering as well as trained with practical laboratory experiments
- The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems
- Related to PEOs 1 and 2
PO4
Ability to identify, formulate and model problems and find engineering solutions based on a systems approach
- To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach
- Related to PEOs 1 and 2
PO5
Ability to conduct investigation and research on engineering problems in a chosen field of study
-The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions
-The graduates will be able to tackle on problems and improvement by conducting research in the field of multimedia engineering and this will equip them with the capability of
becoming not only as an engineer but also a researcher in developing new technologies
- Related to PEO 1
PO6
Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions
- As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and sustainable
- Related to PEO 2
PO7
Understanding and commitment to professional and ethical responsibilities
- The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical
responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues
- Related to PEOs 1 and 2
PO8
Ability to work effectively as an individual, and as a member/leader in a team
- In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently
but also as a part of a team
-Related to PEOs 1 and 2
PO9
Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills
- In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management,
leadership and entrepreneurial skills
- Related to PEOs 1 and 2
PO10
Awareness of the social, cultural, global and environmental responsibilities as an engineer
- The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental
responsibilities and the need for sustainable development
- Related to PEO 2
PO11
Capability and enthusiasm for self-improvement through continuous professional development and life-long learning
- The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development
and life-long learning
- Related to PEOs 1 and 2
E
Faculty of
NGINEERIN G
Outcome Based Education (OBE) system
Getting to know the mapping of Programme Outcomes (POs),
Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree
B.Eng. (Hons) Electronics majoring in Telecommunications
To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of knowledge
workers for nation building, and providing continuous technical support for the ICT industry in Malaysia
Vision
M1. To produce multi-skilled
graduates who are able to
spearhead nation-building in
the Information Age
PEO
PO
PO1
M2. To provide opportunities and
resources for academic and
researchers to carry out the state-ofthe-art research and development work
PEO1. To produce all-rounded
engineers in the telecommunications
technologies in support of the
emerging ICT industry
(Related to M1 & M2 & M3)
PO2
PO3
PO4
PO5
M3. To support the growth of
nationwide ICT industry through
provision of continuous professional
development of knowledge
Mission
PEO2. To develop capable technical
leaders who are able to spearhead the
advancement of telecommunications
in the country
(Related to M1 & M3)
PO6
PO7
PO8
PO9
PO10
PO11
Description of how POs (Programme Outcomes) are linked to the PEOs
PO1
Ability to acquire and apply fundamental principles of science and engineering
- The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology
- This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and
support the development of engineering practices in the industries in Malaysia
- Related to PEO 1
PO2
Capability to communicate effectively
- Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational
- To be a good leader, effective communication is a must
- Related to PEOs 1 and 2
PO3
Acquisition of technical competence in specialised areas of engineering discipline
- The graduates have been prepared with comprehensive knowledge in the field of telecommunications engineering as well as trained with practical laboratory experiments
- The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems
- Related to PEOs 1 and 2
PO4
Ability to identify, formulate and model problems and find engineering solutions based on a systems approach
- To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach
- Related to PEOs 1 and 2
PO5
Ability to conduct investigation and research on engineering problems in a chosen field of study
-The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions
-The graduates will be able to tackle on problems and improvement by conducting research in the field of telecommunications engineering and this will equip them with the
capability of becoming not only as an engineer but also a researcher in developing new technologies
- Related to PEO 1
PO6
Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions
- As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and sustainable
- Related to PEO 2
PO7
Understanding and commitment to professional and ethical responsibilities
- The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical
responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues
- Related to PEOs 1 and 2
PO8
Ability to work effectively as an individual, and as a member/leader in a team
- In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently
but also as a part of a team
-Related to PEOs 1 and 2
PO9
Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills
- In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management,
leadership and entrepreneurial skills
- Related to PEOs 1 and 2
PO10
Awareness of the social, cultural, global and environmental responsibilities as an engineer
- The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental
responsibilities and the need for sustainable development
- Related to PEO 2
PO11
Capability and enthusiasm for self-improvement through continuous professional development and life-long learning
- The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development
and life-long learning
- Related to PEOs 1 and 2
Faculty of
E
NGINEERIN G
Outcome Based Education (OBE) system
Getting to know the mapping of Programme Outcomes (POs),
Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree
B.Eng. (Hons) Electronics majoring in Optical Engineering
Vision
M1. To produce multi-skilled
graduates who are able to
spearhead nation-building in the
Information Age
Integration of
optical devices
on a chip
PEO
PO
PO1
M
i
s
s
i
o
n
To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of
knowledge workers for nation building, and providing continuous technical support for the ICT industry in
Malaysia
M2. To provide opportunities and
resources for academic and
researchers to carry out the state-ofthe-art research and development work
PEO1. To develop highly competent
engineers who are acquainted with
the latest developments in the
emerging photonics technology
(Related to M1 & M2)
PO2
PO3
PO4
PO5
M3. To support the growth of
nationwide ICT industry through
provision of continuous professional
development of knowledge
PEO2. To produce technical leaders
who are innovative in implementing
acquired knowledge in the photonics
industry
(Related to M1 & M3)
PO6
PO7
PO8
PO9
PO10
LASER
DIODE
PO11
Description of how POs (Programme Outcomes) are linked to the PEOs
PO1
Ability to acquire and apply fundamental principles of science and engineering
- The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology
- This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and
support the development of engineering practices in the industries in Malaysia
- Related to PEO 1
PO2
Capability to communicate effectively
- Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational
- To be a good leader, effective communication is a must
- Related to PEOs 1 and 2
PO3
Acquisition of technical competence in specialised areas of engineering discipline
- The graduates have been prepared with comprehensive knowledge in the fields of electronics and optical engineering as well as trained with practical laboratory experiments
- The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems
- Related to PEOs 1 and 2
PO4
Ability to identify, formulate and model problems and find engineering solutions based on a systems approach
- To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach
- Related to PEOs 1 and 2
PO5
Ability to conduct investigation and research on engineering problems in a chosen field of study
-The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions
-The graduates will be able to tackle on problems and improvement by conducting research in the fields of electronics and optical engineering and this will equip them with the
capability of becoming not only as an engineer but also a researcher in developing new technologies
- Related to PEO 1
PO6
Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions
- As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and sustainable
- Related to PEO 2
PO7
Understanding and commitment to professional and ethical responsibilities
- The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical
responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues
- Related to PEOs 1 and 2
PO8
Ability to work effectively as an individual, and as a member/leader in a team
- In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently
but also as a part of a team
-Related to PEOs 1 and 2
PO9
Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills
- In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management,
leadership and entrepreneurial skills
- Related to PEOs 1 and 2
PO10
Awareness of the social, cultural, global and environmental responsibilities as an engineer
- The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental
responsibilities and the need for sustainable development
- Related to PEO 2
PO11
Capability and enthusiasm for self-improvement through continuous professional development and life-long learning
- The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development
and life-long learning
- Related to PEOs 1 and 2
Faculty of
E
NGINEERIN G
Outcome Based Education (OBE) system
Getting to know the mapping of Programme Outcomes (POs),
Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree
B.Eng. (Hons) Electronics majoring in Nanotechnology
Vision
To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of knowledge
workers for nation building, and providing continuous technical support for the ICT industry in Malaysia
Mission
M1. To produce multi-skilled
graduates who are able to
spearhead nation-building in the
Information Age
M2. To provide opportunities and
resources for academic and
researchers to carry out the state-ofthe-art research and development work
PEO1. To train and nurture competent
technical and engineering leaders in
support of the activities in the
nanoscale electronics industry
(Related to M1 & M3)
PO1
PO2
PO3
PO4
M3. To support the growth of
nationwide ICT industry through
provision of continuous professional
development of knowledge
PEO2. To produce versatile engineers
with the ability to consistently
synthesise new technologies in the
nanoelectronics sector
(Related to M1 & M2)
PO5
PO6
PO7
PO8
PO9
PEO
PO
PO10
PO11
Description of how POs (Programme Outcomes) are linked to the PEOs
PO1
Ability to acquire and apply fundamental principles of science and engineering
- The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology
- This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and
support the development of engineering practices in the industries in Malaysia
- Related to PEO 1
PO2
Capability to communicate effectively
- Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational
- To be a good leader, effective communication is a must
- Related to PEOs 1 and 2
PO3
Acquisition of technical competence in specialised areas of engineering discipline
- The graduates have been prepared with comprehensive knowledge in the field of nano engineering as well as trained with practical laboratory experiments
- The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems
- Related to PEOs 1 and 2
PO4
Ability to identify, formulate and model problems and find engineering solutions based on a systems approach
- To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach
- Related to PEOs 1 and 2
PO5
Ability to conduct investigation and research on engineering problems in a chosen field of study
-The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions
-The graduates will be able to tackle on problems and improvement by conducting research in the field of nano engineering and this will equip them with the capability of becoming
not only as an engineer but also a researcher in developing new technologies
- Related to PEO 1
PO6
Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions
- As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and sustainable
- Related to PEO 2
PO7
Understanding and commitment to professional and ethical responsibilities
- The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical
responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues
- Related to PEOs 1 and 2
PO8
Ability to work effectively as an individual, and as a member/leader in a team
- In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently
but also as a part of a team
-Related to PEOs 1 and 2
PO9
Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills
- In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management,
leadership and entrepreneurial skills
- Related to PEOs 1 and 2
PO10
Awareness of the social, cultural, global and environmental responsibilities as an engineer
- The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental
responsibilities and the need for sustainable development
- Related to PEO 2
PO11
Capability and enthusiasm for self-improvement through continuous professional development and life-long learning
- The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development
and life-long learning
- Related to PEOs 1 and 2
Faculty of
E
NGINEERIN G
Outcome Based Education (OBE) system
Getting to know the mapping of Programme Outcomes (POs),
Programme Educational Objectives (PEOs), Missions and Vision of FOE for the degree
B.Eng. (Hons) Electronics majoring in
Microwave and Communications
Vision
To be a leading engineering faculty for creation, preservation and dissemination of knowledge, training of
knowledge workers for nation building, and providing continuous technical support for the ICT industry in Malaysia
M1. To produce multi-skilled
graduates who are able to
spearhead nation-building in
the Information Age
M2. To provide opportunities and
resources for academic and
researchers to carry out the state-ofthe-art research and development work
M3. To support the growth of
nationwide ICT industry through
provision of continuous professional
development of knowledge
Mission
PEO1. To train and nurture
competent technical and engineering
leaders in support of the activities in
the microwave and radiofrequency
(RF) electronics industry
(Related to M1 & M3)
PO
PO1
PO2
PO3
PO4
PO5
P
E
O
PEO2. To produce versatile engineers
with the ability to consistently
synthesize new technologies in the
microwave and radiofrequency (RF)
electronics engineering sector
(Related to M1 & M2)
PO6
PO7
PO8
PO9
PO10
PO11
Description of how POs (Programme Outcomes) are linked to the PEOs
PO1
Ability to acquire and apply fundamental principles of science and engineering
- The graduates have firm fundamental knowledge and therefore can easily understand and adapt to any change in the technology
- This will ensure that the graduates will be of high caliber equipped with the fundamental technical principles of science and engineering so that they can lead, facilitate and
support the development of engineering practices in the industries in Malaysia
- Related to PEO 1
PO2
Capability to communicate effectively
- Communication and networking skills are enhanced through presentations, exchanging ideas and arguing with solid rational
- To be a good leader, effective communication is a must
- Related to PEOs 1 and 2
PO3
Acquisition of technical competence in specialised areas of engineering discipline
- The graduates have been prepared with comprehensive knowledge in the field of microwave and RF engineering as well as trained with practical laboratory experiments
- The broad and comprehensive knowledge obtained by the graduate enables them to give effective and practical solutions to industry problems
- Related to PEOs 1 and 2
PO4
Ability to identify, formulate and model problems and find engineering solutions based on a systems approach
- To become great technical leaders, the graduates should be able to identify, formulate and model problems as well as finding engineering solutions based on a systems approach
- Related to PEOs 1 and 2
PO5
Ability to conduct investigation and research on engineering problems in a chosen field of study
-The graduates are aware of existing up-to-date technologies and have strong knowledge and skills to readily contribute to the development of practical engineering solutions
-The graduates will be able to tackle on problems and improvement by conducting research in the fields of microwave and RF engineering and this will equip them with the
capability of becoming not only as an engineer but also a researcher in developing new technologies
- Related to PEO 1
PO6
Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions
- As a technical leader, the graduates will not only have to think on the design side, but will also have to ensure that the design is cost-effective, reliable, and sustainable
- Related to PEO 2
PO7
Understanding and commitment to professional and ethical responsibilities
- The graduates are made aware to implement and develop technology through good engineering conduct. With the additional commitment towards professional and ethical
responsibilities, the graduates will be elevated in terms of attitude and awareness towards ethical issues
- Related to PEOs 1 and 2
PO8
Ability to work effectively as an individual, and as a member/leader in a team
- In development of an outstanding leader will come with good team work and thus the Programme is aimed at producing engineer who is not only capable of working independently
but also as a part of a team
-Related to PEOs 1 and 2
PO9
Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills
- In order to obtain immaculate innovativeness, a great leader will have to be enriched with various skills encompassing vast areas including technical knowledge, management,
leadership and entrepreneurial skills
- Related to PEOs 1 and 2
PO10
Awareness of the social, cultural, global and environmental responsibilities as an engineer
- The graduates are made aware and understand their roles as engineers for the society. These include the awareness of the social, cultural, global and environmental
responsibilities and the need for sustainable development
- Related to PEO 2
PO11
Capability and enthusiasm for self-improvement through continuous professional development and life-long learning
- The graduates are encouraged to explore and learn various technical as well as interdisciplinary skills, establishing strong enthusiasm for continuing professional development
and life-long learning
- Related to PEOs 1 and 2