A new Generation in Heating
Concepts
Is a subsidiary of the
Advanced Green Energy Alliance Holding
AGEAH is a worldwide producer of energy
producing and energy saving products
Presenting Prestyl’s IRL
Infra-Red Long
Wave
Heating Technology
Core Technology
• AGEAH-Prestyl has acquired the
worldwide production and marketing
rights for a new generation of Farinfrared heating technology based on a
proprietary film produced by ILO
Technology.
• With sixteen years of successful IRL
development ILO is one of
the world's most advanced
manufacturers of IRL
heating media.
Core Technology
• ILO/Prestyl technology can be found in……
• Homes, Buildings, Industrial complexes
from the ancient to the latest creations
• The world’s fastest trains, largest
passenger vessel, small boats, RVs
and metro-passenger cars.
• Modern automobiles and
aircraft
• Agricultural applications
The Art of Heating
Sample of art
available
• In today’s market there is an increased
demand for efficient and esthetically
pleasing products. Professional interior
designers are continually looking for
ways to conceal certain needed
elements in their designs, such as
televisions, speakers, radiators, etc…
• Prestyl has addressed comfort heating
in a way that can fit seamlessly into any
design. From the basic modern black or
white to over 150 different artwork
designs available in several sizes.
The Art of Heating
Sample of art
available
• Having the option of integrating custom graphics,
artwork or a family photograph is a significant way
to personalize a space for your clients.
• The background shown is a sample of some of the
designs currently available.
Product Overview
Residential Artworks
Office applications
• Plug-in, 120 Volts
• In-ceiling Panels
• Heated Ceiling Tiles
• All popular Voltages
Product Overview
• Residential/Industrial
installation behind
plasterboard
(US approvals estimated 4th quarter 2011)
• Industrial and Sports hall
applications
What is IRL?
IRL, or Infra-Red Long wavelength
- The IRL produced by PRESTYL’s technology is an infrared wave
in the healthy Infrared “C” band (also called Far-Infrared)
- This is considered to be very health for people, plants and
animals; it is deemed “natural warmth”
- The actual wavelength can be found in the band between
7500 en 10000nm (7.5 – 10 micrometer)
PRESTYL ”radiates” to a maximum of 16’, or about 5 meters
- The warmth is felt as a gentle IRL.
- IRL at this wavelength travels through the air and the heat
energy is absorbed by materials or mass (identical to the
warmth of the sun); like with a car’s headlamps, the energy
loses intensity over distance.
Summary benefits IRL
• Travels around air-molecules so the air does not heat
up
• The air is heated by the mass (objects) in the space,
not by the IRL
• Because the air is not heated the relative humidity
will remain stable
• No convection when ceiling-mounted; minimal
convection when wall-mounted - - no dust
circulation!
Summary continued
• Saves Energy since it does not heat the air; it only
heats mass (objects)
• Low initial cost compared with traditional heating
systems
• Low cost of ownership; no maintenance
• Low surface temperature (approx 200°F)
• May be used on walls or ceiling (ceiling is the most
efficient for IRL)
• Virtually no dust circulation
• Healthy Far-Infrared
• Stable humidity (good for people with respiratory
problems
Summary continued
• “Gentle”, comfortable warmth
• The room thermostat is typically set 2-3 degrees
lower than with conventional heat (no need to heat
the air; people, floors, walls and objects in the room
are warm
• Easily reachable “comfort-level” so there is no need
for excessive heating
• In properly installed systems the formation of mold is
virtually eliminated (bathrooms, east facing walls,
etc.)
• Stops or reverses mold (dries excessive moisture and
the wall assumes the same humidity levels as the
rest of the space so mold cannot grow)
Summary continued
• Totally silent
• No odors (even after prolonged periods)
• No dark edges (no convection thus no dark dust
adheres)
• 100% recyclable according to International Standard
RT2015 and exceeds HQE Kyoto Protocol
• 2-year standard warranty, 5 Years optional
• Wall panels can be installed by homeowner (simple
plug-in)
• Larger systems use “off the shelf” control components
Important considerations
ILO/PRESTYL:
• 16 year old proven technology with high-profile OEM
customers worldwide (successful relationships spanning
well over a decade)
• Hundreds of different OEM heating applications
• 16 miles of IR film can be produced per day (this
capacity can be doubled in just a few months)
• ILO Technology (the manufacturing company) has been
financially independent from its inception!
Available IRL panel types
• Standard Collection
• There are over 120 available photographs in the
Standard Collection (because of the large variety of
voltages only a limited number are stocked in the
USA, all others available as special orders)
Available IRL panel types
• Suspended and in-ceiling panels
• Standard color is white
• Voltages 120V, 208V, 240V, and 277V
Multi-panel wiring
• Single panels may be plugged-in or can be controlled by
hard-wired or wireless line-level (AC Voltage)
thermostat
• Multi-panel installations can be easily controlled by “off
the shelf” low-voltage thermostats in conjunction with
(hybrid) relays and a simple 24 VDC power supply.
• The following slide shows a typical wiring diagram
• Depending on preference, the installer may obtain
his/her own relays, transformers, control housings and
thermostats or, if a complete package is required, these
components may be supplied by Prestyl USA
Specialty panels (UL pending)
The following products are expected
to be introduced end 2011
• Water-resistant towel warmer
(with or without regulator)
• Heated mirrors
• Anti-fog Mirror film
Flexible products (UL pending)
• Carpet heating
• Heated carpets
• Under laminate (in-floor) heating
Invisible Ceiling Systems (UL pending)
• Prestyl’s revolutionary “hidden heating
system” is placed in a frame which is mounted
to the ceiling
• Once installed and tested, Plasterboard is
installed over the frames and finished like a
traditional plasterboard ceiling
• The entire ceiling becomes a Far-Infrared
radiator
• Provides soothing warmth at temperatures of
approximately 100 degrees Fahrenheit
Components of the “behind the plasterboard” (hidden)
low-temperature Heating System
24 x 48” heating module
Illustrations of special connectors,
Thermostat and control/relay box
Illustrations of pre-packaged system components
24 x 48” insulating blank
30
Integrated invisible Low-temperature heating
systems under construction (operates at 100
degrees Fahrenheit)
31
How do we save ENERGY?
• Based on field data from a large number of
installations over many years, Prestyl’s revolutionary
“hidden heating system” only requires an installed
power level of 4.0 to 5.5 Watts per square foot (41-56
Watts per square meter depending on glass surfaces
present)
• Traditional heating systems require 9.7 to 12 Watts per
square foot (100-125 Watts per square meter)
• If a room is 10 x 20’ by 10’ high, Prestyl would require
an installed power of 920 Watts, while a traditional
convection system would require 2260 Watts, or more
than 11 Watts per square foot (100-125Watts/square
meter)
• Because energy is stored in mass, not the air, Prestyl’s
systems offer significant savings over traditional
heating methods
Average Energy Consumed
• The average energy usage based on customer
surveys is 30% to 50 % of the installed power
• Case studies can be found on Prestyl’s website
• The typical “Comfort temperature” is 2-3 degrees
Fahrenheit (1.5-2 degrees C) lower than with
conventional systems; this too reduces overall energy
usage
• The maximum distance covered by Prestyl’s systems
is 16’ (or 5 meters); since most ceilings are lower, the
energy will travel deeper into the mass and, hence,
the floors stay warm longer
Prerequisites to Energy Savings
• To guarantee a successful installation, there are a few cautions and
prerequisites associated with Far Infrared (IRL); the items to be
considered are virtually identical to in-floor hydronics or in-floor
resistive electrical heating systems
• The building should be reasonably well insulated, preferably with dualpane windows
• The floor should be well insulated; the most critical is perimeter
insulation
• Provide adequate drainage (groundwater runoff must be kept away
from the floor)
• Follow the installation recommendations to ensure proper panel
placement
• Under-capacity will cause the system to work overtime; where ever
practical install 20% more power than calculated (in nearly all cases the
power savings will pay for this added capacity)
Illustrations of installed systems
0.60” of Ultra-thin warmth
0.60” of Ultra-thin warmth
• Thin sides for a frameless ultra-thin look
• Hidden mounting systems make the panel
appear as if it floats on the wall or ceiling
PRESTYL
Low-cost versions developed
for large retail chains
High-power replacements
for gas radiant systems
High-power radiant
panels
High-power replacements
for gas radiant systems
High-power replacements
for gas radiant systems
• Temperatures: 390°F - 480°F (200°C tot 250°C)
• Improved ILO version of traditional high-temperature cable
heating technology with unique heat to IR conversion (no thinfilm).
• Temperature/intensity adjustable by means of a potentiometer.
• Radiates to 30’
• Industrial applications and high ceiling buildings such as Spots
complexes and warehouses....
! Targeted for forth quarter 2011 !
(UL/ETL pending)
Flexible Awning
heating System
Flexible Awning
heating System
• Heating patios with stationary (and waterproof)
roofs can be done with Prestyl’s traditional
heating panels. However, care must be taken to
ensure there are no significant drafts (keep the
cold wind out) and, because there is limited
storage ability (usually there is no insulated floor
and only canvas or plastic sides), the space will
require four to six times the amount of panels
used in indoor applications.
• When there is no stationary roof………..
Flexible Awning
heating System
… Prestyl’s new flexible canvas heaters can be
incorporated in the roll-up awning/covering.
• The heating material is sandwiched between
an insulation-covered UV protected upper
layer and the exposed lower layer of the
awning/patio cover.
• The heating system or canvas cannot burn
(unless exposed to an open fire)
Heated Clothing
Prestyl Thermo
IRL vest.
Heated Clothing
• Operates on a 6 Volt rechargeable
or replaceable battery pack
• Operating temperature approx. 86
degrees Fahrenheit (30°C)
• Usable time: 3 hours
• Markets:
Manufacturers of work clothing,
vendors, sportsmen, yachtingsupply chains, fishermen, farmers,
hunters, security personnel,
customs or police officers, fieldagents, toll-booth operators,
dispatchers etc.
Distributor Contact
for discount pricing
Personal Power Project
Dan Ringwald
866-853-0803
805-967-6595
www.PersonalPowerProject.com
DanRingwald@PersonalPowerProject.com
Manufacturer Contact
•info@prestylusa.com
•or visit:
•www.prestylusa.com