RESUME_KHAGESH_KHANDELWAL

advertisement
KHAGESH KHANDELWAL
Email: khagesh.khandelwal@gmail.com
Phone:+91- 98865 53261
Profile SUMMARY:
 Currently Working with Thinqbot Technologies as Hardware Design Engineer at Bangalore.
 3 years of full time experience at EmRoTech, Jaipur as Embedded Hardware Design Engineer
2012 – 2015 at Jaipur.
 2 year of Part Time Experience as Embedded System Trainer Virscent Technologies
Hyderabad 2010-2012.
 Good Knowledge in Embedded C, MATLAB.
 Experience in Circuit Design / Schematic Design, PCB Design with EMI/EMC Norms, RTL
Design and verification, ASIC Design and Verification, High Speed Digital Design (DDR3),
Physical Design.
 Hands on experience in AVR micro-controller, ARM micro-processor.
 Expertise in Eagle, ORCAD, Diptrace, Proteus, Altium tools.
 Experience in interfacing IC and port with: USB, USB3.0, Firewire 800/400, Thunderbolt,
RS232, HDMI, Ethernet 10/100/1000, SATA, Bluetooth, Zigbee, CMOS Image Sensor, GPS.
 Expert in Placement, Floor Planning, Routing.
 Ability to integrate out of the box thinking and problem solving analysis to improve processes,
methodologies and design.
 Ability to communicate technical information effectively to non-technical professionals.
PROJECT PROFILE:







Design 5A Relay Board interface with Atmega 168 to control the Home Appliances.
Job Role: Placement, PCB Design- Trace calculation
Tool: Eagle
Design Battery Backup Circuit for RPi Dev Board – Battery backup provides power to RPi
Board when power is turned cut off from RPi. Power glitches are NOT seen by RPi.
Job Role: components Selection, Schematic Design, Trace Power Calculation
Tool: Cadence, Excel
Design dev board interface BLE and GPS- input provide from solar energy and charge the
battery.
Job Role: PCB Design and Verification- ERC, DRC.
Tool: Diptrace - Orcad
Wireless charger- we put our device on the circuit and it will start charge the battery.
Job Role: PCB Design
Tool: Diptrace - Orcad
STM32F based design, Interfacing with TFT-Touch Screen and Memory card
Job Role: Components Selection, Schematic Design, PCB Design and verificationLVS, DRC, Gerber
Tool: Cadence - Orcad
Create Universal Dev Board based on LPC1768, Interface with SD card, USB and controlling
the motor using PWM interfacing.
Job Role: PCB Design
Tool: Cadence - Orcad
Develop USB Hub product- Interface 17 USBs 3.0, Thunderbolt, Firewire 400 & 800.
Job Role: Placement and PCB Design Verification, BOM










Tools: Eagle, Orcad
Design Image Capturing Circuit in ARMv7- Cortex A8 Architecture.
Job Role: Components Selection, Schematic Design, PCB Design and verificationLVS, DRC, Gerber
Tool: Cadence, Orcad
Design ARM_ENCODER with Cortex-8 Architecture.
Job Role: Components Selection, Schematic Design, PCB Design and verificationLVS, DRC, Gerber
Tool: Cadence, Orcad
Design Mini Pad using AT91SAM9G25 ARM-9 Architecture.
Job Role: Components Selection, Schematic Design, PCB Design and verificationLVS, DRC, Gerber
Tool: Cadence, Orcad
Design RF Module- working with 375 KHz frequency using Eagle software.
Design Analog Power circuit of 1kw and 3kw Inverter.
Completed many design using ORCAD, Eagle, DIPTRACE Software.
Green House Management System: Develop and Design Green House System using
ATmega8535, Temperature sensor, Humidity Sensor, etc.
Design Zigbee Module: Design Zigbee module using QPSK modulation Technique in
MATLAB.
Design & Prepare some Robots like Under Water Robot, Mars Rover Robot, etc.
Design a model of Bike Security System using GSM technology with ATmega16.
TECHNICAL PROFILE:
Programming
Languages
Application
Software
Microcontroller








C, C++
Embedded C, HTML, VHDL.
ARM-Keil 8.06, Asm IDE8051 (Assembler), Bascom (AVR, 8051), CV-AVR,
Atmel studio 6, Visual Studio8, CCS6v.
MATLAB(Communication, Signal processing toolboxes), XILINX
Dip Trace, Eagle Professional, Altium , Orcad & Proteus 7.
8085 and 8051 simulator.
MCS-51 Architecture including 89c Series, 89s Series.
Atmel AVR Series, mBed processors, ARM Processors
EDUCATIONAL QUALIFICATION:
Exam
B.Tech (EC)
XII
X
Institute
JECRC, Jaipur
S.S.P.R.I College, Achnera
S.S.P.R.I College, Achnera
Board/
University
RTU
Year of
passing
2012
Result
UP Board
UP Board
2007
2005
69%
65%
STRENGTHS:
 Able to mingle in Team Environment
 Self Analytical, Innovative, Soft Spoken, Socially Helping
65%
TRAININGs and ACHIEVEMENTS :
 Summer Training on Telecommunication by BSNL- RTTC center, Jaipur.
 Always among the Team of the Event Organizers at College.
 Submitted best project in 3rd Sem during B.Tech.
 Attend workshop on AVR microcontroller in JECRC College Jaipur.
 Attend Robousion workshop on Autonomous Robotics by The-ARE Lab.
 Participated in ROBOCON’10 at MIT PUNE.
 Participated in ROBOCON’11 at MIT PUNE and qualify one round.
 Participated & won various electronic project events at college level and state level.
 Participated a National Level Technical Festival in Rajasthan College of Engineering for Women and
submitted a paper on IMAGE PROCESSING.
 Worked upon 89c2051, 8051, AVR-atmega8, AVR 8535 on assembly and c language.
 Participated in ROBOCON’12 at MIT PUNE and announce RAJASTHAN best scorer team.
 Selected in College Ambassador Program for IIT KANPUR Techkrit in 2012.
 Participated Microsoft training sponsored by Dream Spark Yatra held on Jaipur.
 Excellent Award by Virscent Technologies in Embedded System.
I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the
responsibility for the correctness of the above-mentioned particulars.
Date:
Place:
Khagesh Khandelwal
Download