MOBILELOCK™ GPS Locator with Anti-theft Alarm
Copyright © 2008 DEWALT. All rights reserved
MOBILELOCK™ GPS Locator with Anti-theft Alarm
What is MOBILELOCK?
• MOBILELOCK is a completely self-contained, battery
powered security system ideal for monitoring remote assets.
Four built-in sensors can be customized through a secure
website and alert the end-user directly or Central Monitoring
Station upon alarm. Cellular assisted GPS technology
provides location of assets indoors or out.
1. Alarm Notification
2. GPS Locator
3. Customizable Features
4. Portable/Wireless
5. Easy To Use
2
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Product Features
Alarm Notification
- Know about a disturbance from one or more of
the 5 available alarm sensors (4 built-in)
GPS Locator
- Remotely find stolen or lost assets anytime
Customizable Features
- Choose features to fit application and security
needs
- Controlled through secure internet website
Portable/Wireless (indoor/outdoor
product)
- Choose between a variety of run-time options
Requires No Hard-Wiring/Easy To Use
- Very limited installation required
3
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Alarm Notification
• 4 sensors built into base unit
– Tamper, vibration, door/window, temperature
– PIR motion available as an accessory (DS510K)
• Automated notification system
– Phone
– Email
– Text
• Central Station optional connections
– Contact ID
– SIA
4
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Customizable Features
User Accessible Features
•
Customize sensors
•
Program arm/disarm schedules
•
Maintain contact info
•
Map unit
•
Add/delete units
•
Group units
•
Adjust speaker settings (audible/silent)
•
Receive status information (battery level, signal strength, etc.)
•
View event history reports
MOBILELOCK is customized through secure webpage.
5
MOBILELOCK™ GPS Locator with Anti-theft Alarm
How It Works
MOBILELOCK is
mounted on the assetcan be used either as a
visible deterrent or kept
hidden.
6
MOBILELOCK™ GPS Locator with Anti-theft Alarm
How It Works
User places a
phone call or
goes online to
arm the
MOBILELOCK
unit. User can
also program an
arm/disarm
schedule.
7
MOBILELOCK™ GPS Locator with Anti-theft Alarm
How It Works
If one of the built-in
sensors is tripped,
the MOBILELOCK
alarm is triggered
and the siren is
activated (can be
silent if preferred.)
8
MOBILELOCK™ GPS Locator with Anti-theft Alarm
How It Works
Within seconds, the
alarm is transferred to
either the user directly or
to a CMS. If sent directly
the user will receive an
automated phone call,
text message, or email.
Up to three people can
be called as well as three
text messages or emails
sent.
9
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Internal Components
GPS Antenna
Siren (83 db @ 1 meter)
Cellular Antenna
Lithium Battery
Tamper
Vibration Sensor
Door/Window Contact
Sensor
Temperature Sensor
Water Resistant
10
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Battery
• Type
–
–
–
–
Lithium Ion
4.2 V
Rechargeable
Non-serviceable
• Charging
– 80% in two hours; approx 5 hours to fully charge
– Can remain plugged in without causing damage
• Run-time
– Approximately 30 days
– Less run-time in areas with poor cell signal
– Less run-time in cold temperatures
• Low Battery Alarm
– When battery drops below 3.5V (approx. 3 days left)
• Full Battery Alarm
– When battery reaches 4.2V
Copyright © 2007 DEWALT. All rights reserved
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Vibration Sensor
• Detects cutting into metal containers
• Detects movement of heavy equipment
• Adjustable sensitivity settings
– 1 least sensitive; 8 most sensitive
• False Alarm Filter – Pulse Counting
– 3 hits in 10 seconds, 6 in 10 seconds, or OFF
• After an alarm, will not send another vibration
alarm for 15 minutes to allow user time to
disarm. After 15 minutes system is rearmed.
Copyright © 2007 DEWALT. All rights reserved
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Door Contact Sensor
•
•
•
•
•
Protects an enclosed area
Indoor/Outdoor
Magnet can be permanently mounted
Max. 3/8” gap
When arming, if the door is opened, you will get
an alarm (one time)
• After an alarm, will not send another door
contact alarm for 15 minutes to allow user time
to disarm
Copyright © 2007 DEWALT. All rights reserved
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Tamper Sensor
• Sensor on back of DS500; sets off alarm when
MOBILELOCK is removed from mounting
surface
• When the tamper box is checked, its always
“armed”; will notify the user day or night that the
product has been removed
• In DS505, works with tamper on back
• In DS510, works with tamper on back (use
wedge to ensure snug fit)
Copyright © 2007 DEWALT. All rights reserved
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Temperature Sensor
•
•
•
•
Notifies user when temperature rises or falls
Range: 0˚F – 122˚F
Approximate accuracy: +/- 2˚C
After an alarm, will not send another
temperature alarm for 60 minutes to allow user
time to disarm.
• Not recommended for fire protection
• Because charging affects the temperature of the
unit, temperature is ignored while charging; may
not receive an alarm if plugged in.
Copyright © 2007 DEWALT. All rights reserved
MOBILELOCK™ GPS Locator with Anti-theft Alarm
DS510K Motion Detector
• Protects an indoor open area
• Triggers alarm in MOBILELOCK by
sending pulses to the DS500
• 50 ft range; 107 degrees (recommended to
mount in a corner)
• As soon as it sees motion, the PIR “sleeps” for
90 seconds to conserve battery
Copyright © 2007 DEWALT. All rights reserved
MOBILELOCK™ GPS Locator with Anti-theft Alarm
DS520 Universal Sensor Input Adaptor
The DS520 Adaptor is designed to integrate
external security sensors into the DS500
MOBILELOCK.
• Interfaces with a variety of security sensors
• Monitors closed sensor for a change of state
multiple sensors can be wire to the unit in a
closed circuit
• Provides a signal to the DS500 Base Unit
when enabled and system is Armed
• Easy wire up with (+) / (-) terminal block
• Pass through port enables charging of the
DS500 Base Unit
• Internal tamper switch alarms if cover is
opened when Armed
MOBILELOCK™ GPS Locator with Anti-theft Alarm
GPS Locator
•Assisted GPS provides the best
accuracy for use in location
•Assisted GPS offers improved
locating abilities indoors through
the use of cellular technology
• On-line locating available 24/7
featuring Microsoft Virtual Earth
mapping
• Locating available through
website or through phone menu
system
Road, Aerial, & Bird’s Eye Views
18
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Product Specs
•
•
•
•
Cellular Network: Sprint PCS data
Cellular Radio: CDMA Qualcomm 6050 chipset
Location Technology: Qualcomm® gpsOne™
Enclosure
– Weatherproof & UV resistant
– Crush resistant to approx. 1,000 lbs.
• Temperature
– Operating: -4 to 140F
19
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Product Specs-Cont’d
• Speaker
– Built-In siren (can be used silent)
– Paging feature
– Notification of changes, power connected/lost,
arm/disarm (can be silent)
• Attachment
– Strong built-in magnets
– Pre-drilled mounting holes
20
MOBILELOCK™ GPS Locator with Anti-theft Alarm
DS505K
Extended Run-Time Adapter
• Extends battery up to 3 months
– Batteries add approximately 2 months
– Can get approximately three months total
by using a fully charged DS500
• Uses 4 standard “D” non-rechargeable,
alkaline batteries
• For use in remote areas or sites without power
Copyright © 2007 DEWALT. All rights reserved
MOBILELOCK™ GPS Locator with Anti-theft Alarm
DS525
Permanent Power Equipment Adapter
• Connect the DS500 to a 12V or
24V Battery; eliminates the need to
recharge MOBILELOCK
•
•Protect heavy construction
equipment such as backhoes,
loaders, and tractors
•Cables and connectors included
for ease of installation
•
• Durable and weather resistant 22
MOBILELOCK™ GPS Locator with Anti-theft Alarm
User Interface
Copyright © 2007 DEWALT. All rights reserved
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Account Summary
The Account Summary page displays all units in the account, and
gives you the option to locate, arm, and access the sensor settings.
24
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Customizing Unit Settings
25
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Unit History
26
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Update Alarm Contacts
27
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Location View
See the current location of the unit from the Location View page, or
from the Unit Commands on the Customize Units page.
28
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Location History
The Location View history displays a mapped
history of the past 5 locations.
29
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Arm Schedule
Set up an Arm Schedule by selecting specific times for each unit to
arm and disarm. You can also do this manually.
30
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Maintain Users
Add new users and maintain current ones.
31
MOBILELOCK™ GPS Locator with Anti-theft Alarm
Product Offering
DS500:
Includes MOBILELOCK Assisted-GPS base unit complete
with four built in alarm sensors (tamper, vibration, door
contact, and temperature), battery charger, and door
contact magnet.
DS510K:
DS505K:
DS525:
DS520:
Includes DS500 and
indoor PIR motion
sensor
Includes DS500 and 90
day extended run-time
kit
12v/24v equipment
power adaptor
Universal sensor
input
32
MOBILELOCK™ GPS Locator with Anti-theft Alarm
End User Applications
Storage Containers
Asset Tracking
Gang/ Tool Boxes
Pull Behind Trailers
ATM’s
Kitchen
Appliances
Utility Companies
Materials/ Supplies
ATVs
Copper Wire
Shipping
Containers
33