Name _______________________________________________________ Date ________________
Chapter 10
Student Version
Chapter 10 Objectives:








Describe the operation of DHCPv4 in a small-to-medium sized business network.
Configure a router as a DHCPv4 server.
Configure a router as a DHCPv4 client.
Troubleshoot a DHCP configuration for IPv4 in a switched network.
Explain the operation of DHCPv6.
Configure a stateless DHCPv6 for a small to medium-sized business.
Configure a stateful DHCPv6 for a small to medium-sized business.
Troubleshoot a DHCP configuration for IPv6 in a switched network.
Required Materials:
Reading Organizer
Packet Tracer Activities:
Labs:
10.1.3.3 - Configuring DHCPv4 Using Cisco IOS
10.3.1.2 - Skills Integration Challenge
10.0.1.2 Own or Lease Instructions
10.1.2.4 Lab - Configuring Basic DHCPv4 on a Router
10.1.2.5 Lab - Configuring Basic DHCPv4 on a Switch
10.1.4.4 Lab - Troubleshooting DHCPv4
10.2.3.5 Lab - Configuring Stateless and Stateful DHCPv6
10.2.4.4 Lab - Troubleshooting DHCPv6
10.3.1.1 IoE and DHCP Instructions
Chapter Test
Cisco Semester 2 – Routing and Switching Essentials 5.0
1
Robb Jones
Chapter 10
Frederick County Career & Tech Center, MD
Page intentionally left blank.
Name___________________________________________________
_______ Date ________________
Points__________ / ____69___
Chapter 10
Reading Organizer
Student Version
Note: the Reading Organizer has weighted scoring. Any question with the word explain or define in it is
expected to have a longer answer and is worth two points each.
After completion of this chapter, you should be able to:








Describe the operation of DHCPv4 in a small-to-medium sized business network.
Configure a router as a DHCPv4 server.
Configure a router as a DHCPv4 client.
Troubleshoot a DHCP configuration for IPv4 in a switched network.
Explain the operation of DHCPv6.
Configure a stateless DHCPv6 for a small to medium-sized business.
Configure a stateful DHCPv6 for a small to medium-sized business.
Troubleshoot a DHCP configuration for IPv6 in a switched network.
10.1 Dynamic Host Configuration Protocol v4
1. A Cisco IOS feature set called _________________________ offers an optional, full-featured DHCPv4
server.
2. DHCPv4 includes three different address allocation mechanisms to provide flexibility when assigning
IP addresses. List and explain each.
a. _________________________________ -
b. _________________________________ -
c. _________________________________ -
Cisco Semester 2 – Routing and Switching Essentials 5.0
2
Robb Jones
Chapter 10
Frederick County Career & Tech Center, MD
3. Which is the most commonly used DHCPv4 allocation mechanism?
4. What are the four steps a device will use to obtain a lease from a DHCP server?
a.
b.
c.
d.
5. What router command is used to exclude specific addresses from DHCP?
6. What is the purpose of the ip dhcp pool pool-name command?
7. The DHCPv4 service is enabled, by default, on versions of Cisco IOS software that support it. What
command is used to disable the service?
8. What command can be used to verify the operation of DHCPv4?
9. What does the show ip dhcp server statistics command accomplish?
Cisco Semester 2 – Routing and Switching Essentials 5.0
3
Robb Jones
Chapter 10
Frederick County Career & Tech Center, MD
10. By default, what UDP services are forwarded by the ip helper-address command?
a.
b.
c.
d.
e.
f.
g.
h.
11. What is the purpose of the ip address dhcp command?
12. What does the show ip dhcp conflict command display?
13. What are the steps required to verify that the IPv4 helper address is configured properly?
Step 1:
Step 2.
14. A useful command for troubleshooting DHCPv4 operation is the debug ip dhcp server events
command. What does this command report?
Cisco Semester 2 – Routing and Switching Essentials 5.0
4
Robb Jones
Chapter 10
Frederick County Career & Tech Center, MD
15. There are two methods in which IPv6 global unicast addresses can be assigned dynamically. List
both.
a.
b.
16. Which DHCP method allows a device to obtain an IPv6 global unicast address without the services
of a DHCPv6 server?
17. A router must be enabled as an IPv6 router before it can send RA messages. What command is
used to enable IPv6 routing?
Router(config)#
18. There are two ways a PC can create its own unique IID (64-bit Interface ID). List and explain both.
a. _________________________________ -
b. _________________________________ -
19. Using different combinations of the M and O flags, RA messages have one of three addressing
options for the IPv6 device. These are:
a.
b.
c.
Cisco Semester 2 – Routing and Switching Essentials 5.0
5
Robb Jones
Chapter 10
Frederick County Career & Tech Center, MD
20. Which router advertisement is the default on Cisco routers?
21. Write in the correct DHCPv6 lease origination steps to its appropriate field.
10.2 Dynamic Host Configuration Protocol v6
22. What are the four steps to configure a router as a DHCPv6 server?
Step 1 –
Step 2 –
Step 3 –
Step 4 –
Cisco Semester 2 – Routing and Switching Essentials 5.0
6
Robb Jones
Chapter 10
Frederick County Career & Tech Center, MD
23. What does the ipv6 address autoconfig command enable?
24. What command verifies the name of the DHCPv6 pool and its parameters?
25. What does the output from the show ipv6 interface command show?
26. What are the steps necessary to configuring a stateful DHCPv6 server?
Step 1 –
Step 2 –
Step 3 –
Step 4 –
27. What is the purpose of the ipv6 address dhcp interface configuration mode command?
28. What is the purpose of the show ipv6 dhcp pool command?
29. Which command verifies the IPv6 global unicast address on a DHCPv6 client that was assigned by
the DHCPv6 server?
30. Explain why a router might need the ipv6 dhcp relay command?
31. What does the show ipv6 interface interface command verify?
Cisco Semester 2 – Routing and Switching Essentials 5.0
7
Robb Jones
Chapter 10
Frederick County Career & Tech Center, MD
32. Explain how Stateful DHCPv6 is different from Stateless DHCPv6.
a. _____________________________________ –
b. _____________________________________ –
33. Which command is useful to verify the receipt and transmission of DHCPv6 messages?
Cisco Semester 2 – Routing and Switching Essentials 5.0
8
Robb Jones
Chapter 10
Frederick County Career & Tech Center, MD