Tender specification for universal protection devices tester according to IEC 60364-6
and EN 50110-1 for testing the effectiveness of protection devices in electrical
installations
Universal protection devices tester according to IEC 60364-6 and EN 50110-1 for testing the
effectiveness of protection devices in electrical installations.
Illuminated dot-matrix display
Low ohmic and continuity measurement acc. to EN 61557-1 + 4
alternating polarity, selectable polarity, selectable limits
Insulation of cables appliances acc. to EN 61557 part 1 + 2
Measuring voltage up to 1000 V adjustable, increasing voltage, selectable limits
Fault-loop-resistance L-PE measurement acc. to EN 61557 part 1+3
with short circuit current and recommend the overcurrent protection device
Line impedance measurement equal to the fault-loop measurement
With previous input of the valid fuse it´s suitable for voltage drop determination
Effectivness tests of all types of RCCB´s incl. B type acc. to EN 61557-1+6
Measurement of contact voltage without tripping the RCCB
Tripping test with nominal residual current, trip time measurement
Testing of equipment and RCCBs with rising residual current including
indication of tripping current and contact voltage
Leakage current measurement with a clamp-on probe
Earthing resistance RE (mains operation) acc. to EN 61557-part 1 + 5
Phase sequence determination and indication
Schuko insert variable with 2/3 pol. Adaptor for measurements without mains outlet
(this adapter is included in the delivery)
USB-slave interface for data transfer to a PC
Distribution structures with electrical circuit and RCD data can be individually defined
Created structures can be saved to memory and loaded to the test instrument as required
Measurement data are transmitted to a PC at which they can be printed (ETC)
in report form and archived
RS 232 port for RFID/barcode scanner
Battery powered or rechargeable batteries with external charger
Dimensions:
Weight:
Protection:
Safety class:
Meas. category:
Meas. ranges:
240 x 340 x 62 mm
approx. 2,5 kg with batteries
IP 40
II according to IEC 61010-1
CAT III / 600 V; CAT IV / 300 V
60...400/500 (+-10%)V; 15,4...420 Hz installations
Delivery:
Tester, short instruction manual, long instruction manual on CD
software ETC, schuko-plug insert, 2-/3-pol. adaptor, set rechargeable
batteries and charger
Optional accessory :
Adaptor for various mains outlets, bag, hard case, earth testing accessory
Typ:
PROFiTEST MPRO, MXTRA
Order No.:
M520O, M520P
Brand:
Gossen Metrawatt
Country of Origin:
Made in Germany
Manufacturer:
GMC-I Messtechnik GmbH
Südwestpark 15
D-90449 Nürnberg
Tel.:0911-8602-111; FAX 0911-8602-777
E-Mail: info@gossenmetrawatt.com
www.gossenmetrawatt.com