www.apmwiremeshmachine.com
Hebei Metal Enterprise Co., Ltd. Formerly known as Anping Yilian Wire Mesh Machinery Factory .
Yilian was established in 1995 by Mr. Duan. Our Machine won high praise all over China and our
factory begin to think about entering into the international market.
In 2003,with the police of “Going out ” ,wire mesh exporting also reaches its climax!, in 2004, after
a series of founds, equipment's, workers etc. investments, Hebei Metal Enterprise Co., Ltd was
established and started the exporting of wire mesh machinery worldwide. Till 2012,Metal has dev
eloped into a company with 3 engineers, 70production line workers, 25 production assembly work
ers, 5 after-sale maintenance personals.
With International quality management system certificate ISO9001: 2008 and CE certificate provid
ent and our professional quality control worker’s effort, our products have been exported to more
than 30 countries and regions, such as the United States, canada, Russia, Uzbekistan, Azerbaijan,
Turkey, Iran India, Brazil, Pakistan, Saudi Arabia, Jordan etc.
Our factory is about 300 km away from Beijing and Tianjin, and you are welcomed to visit our
factory anytime.
www.apmwiremeshmachine.com
Through Wire
Drawing Die
4
Rust
Drawing
3
5
2
6
Take Down
Wire
Removal
Wire
Pointer
1
Wire
www.apmwiremeshmachine.com
1.Power : With Jiang Sheng motor, low
energy consumption, good stability
and adopt to long hours work need.
2.Speed control system: GB horizontal
Reducer, operation is convenient and more
Safety.
3.Structure: Integrated design and no need
to install ,There will not break wire and
stable quality.
4. Control: With the world's most state-of-theart electronic control system, can be Evitable
overload, under load, lack of phase, short circuit,
overheat protection.
5.Traction roll: with special high-strength wire
drawing machine and cold-rolled ribbed steel
bar production line the traction reel.
Type
Wire Dia. (mm)
650
500
400
350
﹥ф12
﹥ф10
﹥ф8
﹥ф6.5
Coiling Block
Outside Dia. (mm)
ф600
ф500
ф400
ф350
Speed (Turn/Minute)
25
25
25
25
Motor (Kw)
Voltage (V)
Weight (Kg)
22
380
2300
17
380
1300
13
380
1100
10
380
850
www.apmwiremeshmachine.com
 This machine is suitable drawing wire like low/high carbon wire,
copper wire, aluminum wire etc.
 The finish wire is mainly used for weaving, construction,
galvanized, and can also supply water tank wire drawing
machine to drawing thin wire.
 Transmission system: the machine by multiple reel separately
with horizontal engine with V-belt drive.
 Drawing process at once, so the production of high-efficiency,
low-cost, simple operation and management. In order to meet
the needs of users.
 Our factory can be equipped with a single, or even two, even
three, even five whole composed.
Coiling Block No.
5
4
3
Coiling Block Outside Dia.
(mm)
300/550
300/550
300/550
Max. Inlet Wire Dia.(mm)
6.5
6.5
6.5
Min. Outlet Wire Dia.( (mm)
2
3.8-2
2
Molds (Piece)
5
4
3
Speed (m/min)
216
120-160
120-160
Motor (KW)
37.5
44kw
34.5
Lubrication Method
Drawing Powder
www.apmwiremeshmachine.com
Type
WT - X
WT - Z
Max. Inlet Wire Dia.(mm)
2.0
0.70
Min. Outlet Wire Dia. (mm)
0.65
0.13
Coiling Block Outside Dia. (mm)
280-600
160-180
Speed (Turn/Minute)
276-380
460
Motor (Kw)
13.2
3
Molds (Piece)
10-13
22
Lubrication Method
Water
Water
 This machine is suitable drawing wire like low/high
carbon wire, copper wire, aluminum wire etc.
 Drawing die immersed in the saponification solution
direct cooling; V-belt drive with a combination of
dedicated gearbox or gear, control sub-ordinary
control, frequency control, soft start control.
 Put into low-cost, small footprint, reduces operator
(single).
www.apmwiremeshmachine.com
 The machine consists of
multiple stand-alone drawing
cans with PLC program control,
inverter frequency control.
 The machine can be drawing
low/high carbon wire,
aluminum wire, copper wire
and other metal wire.
Type
LW1-8/600
Coiling Block Outside
600(650)
Dia. (mm)
Max. Inlet Wire
6.5-8
Dia.(mm)
Min. Outlet Wire
2.0-3.0
Dia.( (mm)
Speed (m/Minute)
300
Motor (Kw)
15-11
Weight (Kg)
3000
Outsize (mm)
2000×1200×2650
LW1-10/560
LW1-9/450
560
450
6.5
3.6
1.8
1.1
400
11-7.5
2500
1700×1100×2495
400
7.5
2000
1520×820×2250
 This machine mainly composed
of reel device bridge device,
drawing die box pulley device,
cooling device, protective cover
and rack structural components.
 With ZG45 tungsten carbide
brushed reel surface do mirror
polished, not only hard wear
and does not damage the wire
surface.
www.apmwiremeshmachine.com
Butt welding machine
Electric Control box
Point rolling machine
www.apmwiremeshmachine.com
Hebei Metal Enterprise Co.,Ltd
Tel: +86-311-66792197
Fax: +86-311-66792192
Email: sales@apmwiremesh.com
service@apmwiremesh.com
Website:www.apmwiremesh.com
www.apmwiremeshmachine.com