TONL20150211001
A Dutch university spin-off company develops and manufacturers a new
material consisting of pure carbon that forms micron-sized three dimensional
networks. These provide an optimum structure for enhancing the transfer of
electrons, heat or mechanical forces. Added in low amounts, the performance
of elastomers, thermoplastics and thermosets can be significantly improved.
The company is seeking partners in various high-end industrial sectors for
commercial agreements with technical assistance.
TONL20150223002
A Dutch SME specializes in the development and production of antenna
technology. The SME offers integrated microwave photonic antenna
technology to enable the next generation of robust high speed broadband
communication. Demonstrators of on-chip integrated ultra-flat dynamic
antenna arrays, capable of maintaining connection with satellites at high
speeds, are available. The Dutch SME looks for commercial agreements with
technical assistance or joint ventures with telecom system integrators.
TOUK20131119001
Until recently, there were no proper debugging tools for complex software
running on Linux. A start-up UK company has launched a commercial
reversible debugger that is orders of magnitude faster than open source
solutions whilst taking up little memory. The tool has been proven to speed
up coding and makes risk management more predictable. Developers of
financial software, electronic design automation etc. are sought for
commercial agreements with technical assistance.
TOUK20141215001
A UK company offers under licence globally acknowledged technology for
audio watermarking. Encoded content and interactive apps allow for very
precise time synchronisation between the two. This in turn allows for highly
responsive live and on-demand user interaction. Either a software
development kit (SDK) or encoding hardware is available for application
developers. Broadcasters, production companies, digital agencies, app
developers, toys and games developers are sought for licensing deals.
TOUK20130628001
A small UK company specialised in back care has taken out a patent on a leg
rest or kneeling pad that attaches to office and other chairs. It has greater
freedom in changing the position and hence the person’s posture. A more
frequent change in posture helps prevent slouching and back problems.
Manufacturers of office furniture or specialist seating are being offered a
licence.
TOUK20150224002
A UK photonics technology company has developed a novel semiconductor
chip-based spectrometer that uses a single component to perform both
wavelength selection and detection functions. They are seeking to
incorporate this into mobile devices for better calibration, colour recognition
and more, in particular towards the H2020 call "ICT-19-2015 Technologies
for creative industries, social media and convergence." They are seeking
research and/or technical cooperation with companies or academics.
TOES20130826002
A Spanish technology company has developed a software tool for the travel
segment. The technology provides the necessary software for the creation
and management of internet travel portals. The company is interested in
product transfer through licensing; establishing joint ventures with tourism
software companies with synergies on products; and is open for
technological cooperation for further joint development proposals
TOPL20140110002
A research team from the university from Lower Silesia (Poland) has
developed a sensor for monitoring biofilm development in stagnant water(s).
The sensor monitors the biofilm growth in water supply systems by constant
measurement of impedance fluctuation. This technology is ready for
licensing (mass production purposes) or for further development under a
research cooperation agreement.
TOPL20140110001
Research team from a University in Poland has developed a biological sensor
for monitoring of water supply networks. The know-how concerning the
biological sensor can be licensed to potential production partners or further
developed upon joint research agreement.
TOUK20131120001
A UK company has developed flexible plastic backplanes for various
sensors, including optical and X-ray. These can be developed into niche
products in dentistry and non-destructive testing amongst others, but also
thin scanners for portable devices and many other consumer products.
Manufacturers of photo and X-ray sensors are sought for joint further
development and licensing.
TOUK20150206001
In natural disaster situations and developing, third world countries, there is
the need to deploy effective medical provision speedily and flexibly. A small
SME in the UK has developed a flat-packed, rapidly deployed solution that
has significant advantages over existing temporary provision. It seeks a
prototype development partner in order to attract investment for
commercialisation. Joint venture, manufacturing, licensing and technical
cooperation agreements can all be considered.
TOUK20130621001
A UK startup has developed a clever yet simple controller for photovoltaic
(PV) systems. All excess energy from a PV system is diverted into the water
heater. The savings for the household resulting from not drawing energy
from the grid are nearly triple compared to the PV system alone. The
controller has no microprocessor and is not prone to errors. Manufacturers of
energy saving products, but also installers of PV are sought for licensing or a
commercial agreement with technical assistance.
TOPL20140110003
A research team from the university in Lower Silesia has developed system
for generation of calibration gas mixtures. System allows production of a
mixture of gas compounds which may be used to calibrate the gas sensors.
The know-how can be licensed to potential production partners, especially
companies engaged in production and calibration of sensors; or producing
gas mixtures.
TOES20140925001
A Southern Spanish SME has developed an innovative IT engine for
integration of health information systems. The engine is capable to integrate
heterogeneous systems in a simpler, scalable and more economical way.
Besides, it contributes to avoid all the difficulties presented by some
standards by using a single interface that connects and synchronizes all
systems. They´re seeking local IT integrators for technical cooperation and
final users for commercial agreements with technical assistance.
TOES20141108001
A Spanish SME has developed a novel cloud based platform to provide a full
service Graphic Design. The service is managed through a platform where
customers can select service packages, send requests, check the situation of
the workflow and download the deliverables. The platform is based on
standardized service packages with preset prices and response times. They
are seeking local partners or final users for commercial / service agreements
with technical assistance and technical cooperation.
TOSI20150303001
A Slovenian SME specialized in switches and control systems developed
touchless replaceable switches. The switch cover plates are held in place with
magnets and can be replaced with different cover plates or removed for
cleaning. The main advantage of touchless switches technology is the ability
to make controls and switches nearly invisible, sterile and trendy. Slovenian
SME is looking for partners interested in commercial agreement with
technical assistance, licensing and joint venture.
TOES20140328001
A Spanish SME has developed a could based Augmented Reality
Educational Technology for several. This novel solution combines
Augmented Reality, advanced simulation, e-learning, teacher management,
monitoring software and APPs to enhance educational experiences. It makes
possible to share training results from worldwide institutions and industries.
They are seeking several types of partners for commercial agreement with
technical assistance, technical cooperation or financial agreements.
TOES20140226001
A Spanish SME offers its expertise in embedded electronics and software
development to design System-On-Modules and Single-Board-Computers.
These low-cost and low-energy solutions are based on ARM technology.
Although open to different kinds of collaborations, the SME is mainly
looking for technical cooperation with companies developing and/or
distributing industrial/commercial products needing to be controlled by
powerful embedded electronics running GNU/Linux and/or Real Time
Operating Systems
12 NL 60AH 3R2N
A Dutch SME is specialized in designing, engineering and forming sheet
metal for prototypes and small series with rubber pad press forming. This
technology, in combination with smart engineering, enables creative and
lightweight 3-D constructions. Most important advantages are low tooling
costs, short time to market, a broad scope and no surface damages. The SME
offers partnerships in the frame of commercial agreements with technical
assistance.
TOUK20150303004
A UK photonics technology company experienced in co-developing
miniature spectrometers and optical sensors for a range of applications is
seeking companies or researchers working in mining that are developing
new, improved, highly efficient and cost-effective, sustainable exploration
technologies. They are also interested in the H2020 call "SC5-11d-2015 New
sustainable exploration technologies and geomodels". They are seeking
research and/or cooperation agreements with companies/researchers
10 NL 60AH 3JZE
A Dutch company is specialized in the development and production of
special medical instruments that are processing physiological signals.
Customized and complementary to the need of the partner the company
offers development expertise, co-engineering, production and testing
activities and service for those medical instruments. The Dutch company is
interested in commercial agreements supported by development, production
and technical assistance with SME’s and start-ups in the medical sector.
TOUK20150303003
A UK photonics technology company experienced in co-developing
miniature spectrometers and optical sensors for a range of applications is
seeking photonics companies and/or researchers to adapt their technology
towards new applications. Applications include novel technologies and
devices for beam delivery. They are seeking technical and research
cooperations, which may include the H2020 call "ICT-27-2015 - Photonics
KET (Key Emerging Technologies)".
TOHR20140124001
A small Croatian company with strong connection to Finland has developed
prototype of Programmable Logic Controller (PLC) based on Internet of
Thing premise which allows users to communicate, monitor and interact with
their home environment via mobile phones or web browsers. The device can
be easily plugged in existing home network. The company is looking for
partners interested in joint venture or acquisition agreement.
TOAT20150225001
The proposed technology of an Austrian SME calculates large coverage solar
cadastres of facades and roofs of buildings in urban landscapes. The results
allow the localisation of parts of facades and roofs with high insolation
values or high sun duration. Cooperation with companies engaged in the
energy and construction sector as well as the real estate market is sought for
joint ventures, financial agreements or commercial agreements with technical
assistance.
TOES20150225001
A Spanish research group has developed a new solar photovoltaic (PV) cell
with inverted architecture without leading to corrosion and air-stability
problems. This novel PV cell uses low cost materials and it is compatible
with low-temperature manufacturing process. It is developed at laboratory
scale. European and PCT patents have been applied for but not granted yet.
The research group is looking for manufacturers of PV cells for licensing or
technical agreements.
TOKR20150302001
A Korean SME has developed a total Solution of Advanced Metering
Infrastructure (AMI) system. It measures, collects and analyses electric
energy usage of office buildings or private houses. Using this technology,
you can collect electricity meter information within 15 minutes from a
remote location. The system enables users to keep monitoring their energy
consumption and is able to reduce the energy usage. The company is looking
for partners for commercial agreement with technical cooperation.
TOIT20150225001
An Italian SME has developed an open source model-driven web application
framework focused on productivity and maintainability. It can be used to
develop web applications for information management, work flow and
collaboration, front-office and back-office processes, customer relationship
management, and much more. The company seeks partners for technical
cooperation agreements.
TOCZ20150304002
A Czech university research team has developed material based on the
polypropylene matrix containing coconut fibres in order to substitute
standard fillers (e. g. talc, glass fibres etc.). The material meets differently
motivated requirements for special synthetic polymers modifications by
means of the natural materials. The researchers are looking for partners
interested in production under a license agreement.
TODE20150227001
A German university offers a new technology to improve the cycling
stability of lithium-ion batteries. A water-based process is applied to
fabricate composite electrodes and turned into a slurry by adding a solvent
and a natural binder. A mild inorganic acid is added to prevent metal
leaching. The technology is non-toxic and low-cost. Patents are applied.
Industrial licencees are sought.
TOTR20150226001
A Turkish SME with expertise in image processing, computer vision and
pattern recognition, has developed a video analytic software for indoor
customer behaviour. The software works in real time and does not require
any additional hardware except the camera it is running on. The reasoning is
based on advanced computer vision and pattern recognition algorithms. The
SME is interested in finding companies interested in licensing the software.
TOES20140210001
Three Spanish institutions, a Biomedical Research Center, a University and a
Hospital developed, in a multidisciplinary collaboration, a new photothermal
device comprising plasmonic nanoparticles embedded in a hydrogel made of
fibrin matrix that may entrap thermosensitive effectors. The invention is
useful for the application of hyperthermia-based therapies and controlled
delivery of therapeutic agents in biological tissues. Companies interested in
licensing or further development are sought.
TOES20140219001
A Spanish research group offers an innovative tool for 3D reconstruction for
engineering and architecture applications. This tool is based on the
optimization and development of computer vision, photogrammetric and
laser scanning methods and algorithms for 3D reconstruction and
visualization of natural and man-made sites or objects. License, research,
technical cooperation and commercial agreements with technical assistance
are sought.
TOCH20150206002
A Swiss company engineered a fully biodegradable, composite (non-PLA)
material that can be used for traditional manufacture as well 3d-printing.
First test series in 3d-printing have been successful.
The Swiss company is looking for a partner company with expertise in 3dprinting interested in further developing and refining the 3d technology for
the biodegradable biopolymer.
Technological cooperation -, licensing – or joint venture agreement possible.
TOCZ20150112001
A Czech university has developed a new diagnostic system for condition
monitoring of rotating machines (mainly turbines) in non-stationary events.
Developed system provides monitoring of non-stationary events in machine
operation which can help improve its durability and maintenance
management. The university is looking for manufacturers or operators of
power equipment or rotating machines interested in technical cooperation
and diagnostic services agreement.
TOCZ20150108001
Czech university has developed a new technology based on the Organic
Rankine Cycle principle.The unit is easy-to-manufacture and install and is
designed to utilize surplus of unused thermal energy in biogas power plants.
Its planned net power output is approx. 10kWe.The patent-pending prototype
available is for demonstration. Manufacturers for licensing, partners for
technological cooperation and also partners for funding are sought.
TOCZ20150210001
A Czech university has developed a device enabling efficient sorting of
fragments of coloured material (e.g. glass) from waste. Based on the colour
of the material fragment, the built-in air-valves can quickly blow out and sort
the pieces into the right stack. Scientists are looking for partners interested in
further research and development based on a technical cooperation
agreement and for companies from recycling industry interested in
production under a license agreement.
13 RU 86FG 3RT0
A Russian company from Novosibirsk developed a technology for
production of an automated devices for making clean and healthy drinking
water. The treatment method is based on the principle of natural water
purification through freezing and melting, without artificial filters and
chemical additives. The company is offering a license agreement.
TOIT20130905001
An Italian company specialized in software development is seeking technical
partners for its web application designed to help consultants and consulting
firms to keep track of their business.
Actually the SME is interested in expanding its activities, through
commercial agreements and technical co-operation with industrial partners
available to adapt this system to specific needs.
TODE20150304002
A German company developed a systematic concept for making precise
quantitative (numeric) data interoperable and searchable. It is a general
approach and can be demonstrated. First possible applications are
interoperable eHealth, science, e-commerce, later also Web Search. The
small company searches a sufficiently large partner for development (fully
scalable implementation in professional web design), for application and
advancement of the technology and / or joint venture.
TOUK20131205001
A UK sports cars manufacturer has a long history and a broad IP portfolio in
building lightweight structures. In particular, they are leaders in structures in
bonded aluminium. The business is open to develop automotive
collaborations while also looking to develop relationships across other
market sectors, offering engineering, prototyping, manufacturing in low and
high volumes. Manufacturing, services and technical cooperation agreements
are being sought.
TOLT20150320001
3D printing center from Lithuania specializing in rapid prototyping have
improved its technological capabilities and is looking for partners interested
in joint development of prototypes. The company is interested in low volume
and very precise production. Prototypes are being build and designed from
plastic, metal, ceramic with a fast path to commercial production in mind.
The company is looking for technical cooperation agreements with highly
innovative universities and/or companies.
TODE20150105001
A German university developed a new system that improves data
transmission in powerline communication as used in smart metering. It also
contributes to the reduction of power consumption of the transmitter. No
hardware changes are necessary when introducing the system. Industrial
licensees are sought.
TOES20150310002
A Spanish SME offers a new digital technology for cooling tower water
treatment that completely eliminates the use of toxic chemicals. Thanks to
the generation of electrodynamic fields in the flowing water this technology
prevents mineral scale, inhibits corrosion and keeps pathogens, biofilm and
bacteria (eg Legionella) under control. The company would like to find
companies dedicated to water cooling towers maintenance interested in
signing a commercial agreement with technical assistance.
TOES20150302002
A Spanish research group has patented an original procedure to classify
crops from multitemporal remote sensing images to be used in agricultural
and forestry scenes. The procedure is governed by software 2.0, which
executes it semi-automatically. Before developing it the methodological
approaches for cropping systems classification from remote sensing images
widely varied among authors and geographic area. They are looking for
companies interested in license agreements or technical cooperation.
10 HR 89GJ 3JY8
Croatian SME has developed substation automation for Smart Grid. Smart
Grid comprises unified communications and control system on the existing
power delivery infrastructure to provide the right information to the right
entity at the right time to take the right action. System optimizes power
supply & delivery, minimizes losses, is self-healing and enables energy
efficiency. Technical cooperation & commercial agreement with technical
assistance with contractors and industry investors is sought.
TODE20150312001
A German laboratory and a German SME have co-developed a novel
procedure to identify body fluids through differential DNA-methylation. The
procedure can clarify the course of events at a criminal site, especially with
regard to sexual assaults. Advantages include its reliability, clarity and
stability. Crime-fighting authorities, forensic laboratories and research
institutions are sought for commercial agreements with technical assistance.
TODE20141127002
A German company developed and distributes a laboratory information
management system that covers every functional phase in the laboratory
workflow. It is designed as an easy to use system that integrates all sections
of the laboratory. It organizes, plans, and implements the workflow of the
test requests efficiently while it also handles all administrative tasks in a
secure and regulatory compliant environment. Licensees are sought.
TOFR20150302001
A French company has developed and patented technical polystyrene panels
and adapted fasteners. These panels are ideal for thermal and acoustical
insulation for new buildings as for renovation as they don't create any
thermal bridge. Thanks to the adapted fasteners, the panel can be used
anywhere in the building. The company is seeking licence agreements/
manufacturing agreements with companies producing polystyrene materials
that can manufacture the panels and distribute the fasteners.
TOUK20141128001
A UK SME offers its intelligent 24 hour web-based mobile paging solution
designed for healthcare institutions and veterinary hospitals, enabling
effective task management and prioritisation.
The solution is particularly effective during the ‘Out of Hours’ periods and
extended weekend working periods where all calls are filtered through a
central co-ordinator. It provides dynamic two-way, real-time communication
using the latest mobile technologies.
License agreement offered.
TODE20150225001
An small and medium sized company (SME) from Germany developed a
new plastic recycling method, which allows an holistic treatment of rubber
and plastic production waste. The particles can be inexpensively
manufactured <100 microns without quality constraints by using their
innovative and patented impulse method. The SME is offering technical
cooperation agreements and manufacturing agreements and looking for
commercial agreements.They are also interested in research and innovation
cooperation.
13 DE 1486 3RLR
The Institute of Physiology of a known German University focusing on
'nanophysiology' with the perspective to learn how molecules and ions
interact in health and disease has developed an easy test to determine the
disposition for high blood pressure is looking for license agreement. With
this invention it is possible to determine the disposition for high blood
pressure early enough so that irreversible damages can be prevented.
TOSK20150108002
Significant Slovak research institute engaged in the veterinary research has
developed innovative instrument determining somatic cell counts in milk on
the basis of altered viscosity of milk. The proposed device is highly versatile
and is not only applicable in veterinary medicine but can also be used for
measuring the viscosity of other liquids in various fields of application. The
Institute is looking for partners interested in licensing agreement or financial
agreement.
TOSK20150108005
Research team from a distinguished Slovak university has developed unique
concept of compact closed loop evaporator for the extraction of heat from
various sources, which are in close contact through heat pipes and heat
exchanger. The proposed technology is applicable for cooling systems in the
field of electronics, metallurgy, ceramics or in data centers. The university is
seeking partners through licensing agreement or financial agreement.
TOIT20140226001
An Italian company has designed and produced a new generation of waste
water purifier capable of treating from 2500 up to 22000 litres per day. The
system can process and purify waste water thanks to physical and chemical
treatments just before discharge water into the sea with a total respect of
enforced norms. An industrial partner in the shipbuilding field is sought for a
commercial agreement with technical assistance.
TOPL20130722002
The company from South Poland has developed a control system for lowtraffic rail lines. The solution enables an increase in capacity without the
need to modernize the existing track system, as well as ensuring a higher
level of reliability and safety. The company is looking for users or holders of
rail infrastructure in order to sign a license, manufacturing or commercial
agreement with technical assistance. Technical cooperation agreement is also
possible.
TOCZ20130722001
A Czech SME, which develops and manufactures ceramic foams, is looking
for new applications. The idea is to apply ceramic foams in architecture,
construction, automotive or other sectors where its favourable material
properties might be utilized. Industrial partners for co-developing
applications as well as new end-users based on technical cooperation or
commercial agreement with technical assistance are sought, as well as
licensing agreements and longer term research cooperation agreements.
TOPL20150311001
A Polish small company from electrical services sector has developed a new
type of wind turbine characterised by vertical axis of work and a modular
construction. The device can be exploited in urban environment on the roofs
of buildings thanks to very quiet running and high safety of construction. The
company seeks partners from industry for technical cooperation, financial
and manufacturing agreement.
TOFI20141218001
A Finnish company with extensive experience in high definition video and
audio systems offers its services in software and hardware development. The
company provides custom design services, technology platforms and OEM
solutions for consumer electronics, professional A/V (audiovisual), medical
imaging and industrial A/V. The company is looking for commercial
agreements with technical assistance from companies requiring high quality
audio and video design services.
TOUA20141203001
Ukrainian scientists specialized in leather tannery and tanning process
developed an eco-friendly technology for animal (cattle) skin and hide
processing that allows to produce a set of high-quality products (wet blue,
wet white, crust) as well as leather for footwear (working/sports/running
shoes) and furniture. The developers are looking for industrial partners for
licensing as well as R&D institutions for technical/research cooperation.
TOSK20140924005
Research team from distinguished Slovak university offers an innovative
technology for defining the path of a liquid medium in porous material
without disrupting thermal conductivity of the material. The technology is
applicable in large scale of heat exchangers using porous materials based on
foamed metals, e.g. in electrical engineering, metallurgy or chemical
industry. Partners are sought for financial agreement, manufacturing or
license agreement.
TOSK20150108002
Significant Slovak research institute engaged in the veterinary research has
developed innovative instrument determining somatic cell counts in milk on
the basis of altered viscosity of milk. The proposed device is highly versatile
and is not only applicable in veterinary medicine but can also be used for
measuring the viscosity of other liquids in various fields of application. The
Institute is looking for partners interested in licensing agreement or financial
agreement.
TOES20150302002
A Spanish research group has patented an original procedure to classify
crops from multitemporal remote sensing images to be used in agricultural
and forestry scenes. The procedure is governed by software 2.0, which
executes it semi-automatically. Before developing it the methodological
approaches for cropping systems classification from remote sensing images
widely varied among authors and geographic area. They are looking for
companies interested in license agreements or technical cooperation.
TOUK20131205001
A UK sports cars manufacturer has a long history and a broad IP portfolio in
building lightweight structures. In particular, they are leaders in structures in
bonded aluminium. The business is open to develop automotive
collaborations while also looking to develop relationships across other
market sectors, offering engineering, prototyping, manufacturing in low and
high volumes. Manufacturing, services and technical cooperation agreements
are being sought.
13 RU 86FG 3RT0
A Russian company from Novosibirsk developed a technology for
production of an automated devices for making clean and healthy drinking
water. The treatment method is based on the principle of natural water
purification through freezing and melting, without artificial filters and
chemical additives. The company is offering a license agreement.
TOSK20140924005
Research team from distinguished Slovak university offers an innovative
technology for defining the path of a liquid medium in porous material
without disrupting thermal conductivity of the material. The technology is
applicable in large scale of heat exchangers using porous materials based on
foamed metals, e.g. in electrical engineering, metallurgy or chemical
industry. Partners are sought for financial agreement, manufacturing or
license agreement.
TOFI20141218001
A Finnish company with extensive experience in high definition video and
audio systems offers its services in software and hardware development. The
company provides custom design services, technology platforms and OEM
solutions for consumer electronics, professional A/V (audiovisual), medical
imaging and industrial A/V. The company is looking for commercial
agreements with technical assistance from companies requiring high quality
audio and video design services.
TOIT20140226001
An Italian company has designed and produced a new generation of waste
water purifier capable of treating from 2500 up to 22000 litres per day. The
system can process and purify waste water thanks to physical and chemical
treatments just before discharge water into the sea with a total respect of
enforced norms. An industrial partner in the shipbuilding field is sought for a
commercial agreement with technical assistance.
TOSK20150108005
Research team from a distinguished Slovak university has developed unique
concept of compact closed loop evaporator for the extraction of heat from
various sources, which are in close contact through heat pipes and heat
exchanger. The proposed technology is applicable for cooling systems in the
field of electronics, metallurgy, ceramics or in data centers. The university is
seeking partners through licensing agreement or financial agreement.
TOFR20150302001
A French company has developed and patented technical polystyrene panels
and adapted fasteners. These panels are ideal for thermal and acoustical
insulation for new buildings as for renovation as they don't create any
thermal bridge. Thanks to the adapted fasteners, the panel can be used
anywhere in the building. The company is seeking licence agreements/
manufacturing agreements with companies producing polystyrene materials
that can manufacture the panels and distribute the fasteners.
TODE20150312001
A German laboratory and a German SME have co-developed a novel
procedure to identify body fluids through differential DNA-methylation. The
procedure can clarify the course of events at a criminal site, especially with
regard to sexual assaults. Advantages include its reliability, clarity and
stability. Crime-fighting authorities, forensic laboratories and research
institutions are sought for commercial agreements with technical assistance.
TOPL20130722002
The company from South Poland has developed a control system for lowtraffic rail lines. The solution enables an increase in capacity without the
need to modernize the existing track system, as well as ensuring a higher
level of reliability and safety. The company is looking for users or holders of
rail infrastructure in order to sign a license, manufacturing or commercial
agreement with technical assistance. Technical cooperation agreement is also
possible.
TOES20140219001
A Spanish research group offers an innovative tool for 3D reconstruction for
engineering and architecture applications. This tool is based on the
optimization and development of computer vision, photogrammetric and
laser scanning methods and algorithms for 3D reconstruction and
visualization of natural and man-made sites or objects. License, research,
technical cooperation and commercial agreements with technical assistance
are sought.
13 NL 60AH 3RRD
A Dutch SME has developed a new dike block to create stronger dikes that
cost less. The product is made of concrete and produces greater wave
abatement and less wave runup than existing bank and shore protection. The
dike blocks have less impact on the environment than conventional products
and are easier to put in place because of their shape and mass. The company
is looking for concrete manufacturers to set up a license agreement/
commercial agreement with technical assistance.
TOPL20150311001
A Polish small company from electrical services sector has developed a new
type of wind turbine characterised by vertical axis of work and a modular
construction. The device can be exploited in urban environment on the roofs
of buildings thanks to very quiet running and high safety of construction. The
company seeks partners from industry for technical cooperation, financial
and manufacturing agreement.
TONL20140211001
A Dutch company has developed a range of fishing weight materials as a
durable and non-toxic alternative for fishing lead and sinkers. Different
material grades and product shapes are tested with anglers and produced on
small scale. The company is looking for commercial partners and public
water authorities which are interested in preventing lead pollution and
willing to set up demonstration projects in the frame of commercial
agreement with technical assistance.
TOCZ20130722001
A Czech SME, which develops and manufactures ceramic foams, is looking
for new applications. The idea is to apply ceramic foams in architecture,
construction, automotive or other sectors where its favourable material
properties might be utilized. Industrial partners for co-developing
applications as well as new end-users based on technical cooperation or
commercial agreement with technical assistance are sought, as well as
licensing agreements and longer term research cooperation agreements.
TODE20150225001
An small and medium sized company (SME) from Germany developed a
new plastic recycling method, which allows an holistic treatment of rubber
and plastic production waste. The particles can be inexpensively
manufactured <100 microns without quality constraints by using their
innovative and patented impulse method. The SME is offering technical
cooperation agreements and manufacturing agreements and looking for
commercial agreements.They are also interested in research and innovation
cooperation.
13 DE 1486 3RLR
The Institute of Physiology of a known German University focusing on
'nanophysiology' with the perspective to learn how molecules and ions
interact in health and disease has developed an easy test to determine the
disposition for high blood pressure is looking for license agreement. With
this invention it is possible to determine the disposition for high blood
pressure early enough so that irreversible damages can be prevented.
TOUK20141128001
A UK SME offers its intelligent 24 hour web-based mobile paging solution
designed for healthcare institutions and veterinary hospitals, enabling
effective task management and prioritisation.
The solution is particularly effective during the ‘Out of Hours’ periods and
extended weekend working periods where all calls are filtered through a
central co-ordinator. It provides dynamic two-way, real-time communication
using the latest mobile technologies.
License agreement offered.
10 HR 89GJ 3JY8
Croatian SME has developed substation automation for Smart Grid. Smart
Grid comprises unified communications and control system on the existing
power delivery infrastructure to provide the right information to the right
entity at the right time to take the right action. System optimizes power
supply & delivery, minimizes losses, is self-healing and enables energy
efficiency. Technical cooperation & commercial agreement with technical
assistance with contractors and industry investors is sought.
TOEE20150225001
An Estonian company has created an attachment that makes ordinary
window blinds smart. It offers new approach to window automation for
construction, renovation and decoration projects. The company is looking for
partners with experience in manufacturing and distribution in the field of
home automation equipment; architectural and engineering firm; real estate
companies; owners and renters of buildings where sun control is crucial for
big energy savings.
TOSI20131107001
A Slovenian research institute has developed a mutated truncated
phosphofructokinase gene that can be used together with its protein product
for enhancing the rate of cell biomass synthesis and excretion of extracellular
enzymes, as well as increasing the productivity of primary and secondary
metabolites. The Institute is looking for partners in the field of microbial
biotechnology and biochemistry interested in developing the technology
further and/or licensing the technology.
TOIT20130905001
An Italian company specialized in software development is seeking technical
partners for its web application designed to help consultants and consulting
firms to keep track of their business.
Actually the SME is interested in expanding its activities, through
commercial agreements and technical co-operation with industrial partners
available to adapt this system to specific needs.
TODE20150209002
A German spin-off active in organic solid-state chemistry provides extensive
know-how in cross-linked analytical methods for active pharmaceutical
ingredients, pigments, polymers and metal-organic compounds as well as for
fine chemicals. They offer unique combined screening techniques for
crystallization of cocrystals, polymorphs or salts from pharmaceutical
ingredients or amorphous materials. Industrial partners are sought for
technological cooperations and common research projects.
TODE20150304002
A German company developed a systematic concept for making precise
quantitative (numeric) data interoperable and searchable. It is a general
approach and can be demonstrated. First possible applications are
interoperable eHealth, science, e-commerce, later also Web Search. The
small company searches a sufficiently large partner for development (fully
scalable implementation in professional web design), for application and
advancement of the technology and / or joint venture.
TODE20141127002
A German company developed and distributes a laboratory information
management system that covers every functional phase in the laboratory
workflow. It is designed as an easy to use system that integrates all sections
of the laboratory. It organizes, plans, and implements the workflow of the
test requests efficiently while it also handles all administrative tasks in a
secure and regulatory compliant environment. Licensees are sought
TOPL20130724004
Researchers from South Poland developed a two-stage method of producing
surface coatings on aluminium alloys that may be used in tribological
(working without greases) systems of machines and devices. The covered
parts are of betted hardness and wear resistance. The scientists are looking
for industrial partners from the machinery field to reach manufacturing
agreements or technical co-operation or research organisations to reach
research cooperation agreements.
TOHR20150311001
A Croatian research group has developed a stimulator designed to be used for
direct electrical stimulation of cerebral cortex focal regions for motor,
sensory and language functions. Group is looking for partners in field of
intraoperative neurophysiology who are interested in license agreement.
10 RB 1B1M 3K4M
Serbian firm has built an advanced research platform for development,
testing and verification of control and spatial navigation algorithms for
wireless, multi-agent robot-sensor networked systems, applicable indoor - in
industry, at home, medical institutions. The main advantage of using these
test bed station is the ability to connect and harness physically-removed
assets. The company is interested in Technical cooperation and Commercial
agreement with technical assistance.
10 RB 1B1M 3K4O
A Serbian company is developing system in the field of wireless home
automation. The main purpose is to monitor and control light intensity, air
temperature and humidity in homes, offices, warehouses etc. System includes
GSM module which enables the user to monitor and control parameters of
interest using mobile phone. Modularity and scalability are the main system
features. The company seeks partners for Technical cooperation and
Commercial agreement with technical assistance.
TOFI20141218002
A Finnish company has developed an IP controlled ultra high definition and
3D video matrix switcher and processor with HDMI, DVI and HDBaseT
connectivity. It provides flexible video processing for e.g. professional A/V
productions and medical applications. The product is available as OEM, and
the company is looking for license agreements from companies interested in
using the system in their products, or technical cooperation or joint venture
agreement to integrate the system into other systems.
TOIT20150306001
An Italian inventor has designed an innovative device for the management of
municipal solid waste. The system easily allows to store the waste and to
obtain raw materials, ready to be recycled without further steps, from
refineries specialized in the processing of raw materials, like plastic, glass,
water. The inventor is looking for partners for the conclusion of a license
agreement or joint further development agreement.
TOPL20130722001
A Polish research institute from the field of advanced power technologies
developed an air nozzle for use in power units with high-power coal-fired
fluidised bed boilers used in power plants (for hard coal and lignite). The
Polish institute seeks industrial partners for a technical co-operation or a
commercial agreement with technical assistance such as: adaptation to
specific needs, engineering and technical consultancy.
TOUA20141203001
Ukrainian scientists specialized in leather tannery and tanning process
developed an eco-friendly technology for animal (cattle) skin and hide
processing that allows to produce a set of high-quality products (wet blue,
wet white, crust) as well as leather for footwear (working/sports/running
shoes) and furniture. The developers are looking for industrial partners for
licensing as well as R&D institutions for technical/research cooperation.
TOLV20150316001
An SME from Latvia offers a technical solution for civil biometric data
enrolment for renewing documents containing biometric data. The solution
provides a secure and convenient method of renewing biometric documents.
The SME is looking for IT companies with expertise in persons’ biometric
data management. The SME seeks for collaboration offering a commercial
with technical assistance agreement for adaptation the solution to local needs
and distribution to customers.
TODE20140121002
A start-up company from Germany has developed a unique innovative
software for voice conversion. The software solution converts a source voice
into a target voice, needing only two audio samples. It can be used to
customize games, movies, songs, audio books etc with an individually
selected voice, sounding absolutely natural. The company is interested in
finding clients, investors, subcontractors and research partners.
TOES20130920005
A Spanish university has developed a ring sensor for non-invasive, high
performance recording of bioelectric signals on the surface of the body, such
as electrocardiogram, electrohistogram, electroenterogram, electromyogram,
electrogastrographic signal, the diaphragmatic signal, as well as the
encephalographic, oculagram and retinogram signals. Researchers are
seeking medical device companies or research institutions to reach license
agreements or further developments of the system.
12 SK 69CT 3Q5C
A small company from western part of Slovakia is offering a very effective
solution which can be used within the automotive industry. The solution
refers to the combustion process of the combustion engine by the
compression of the exhaust tract. Partners are sought for the development of
further applications and to exploit the existing know-how (via License
agreement or Commercial Agreement with Technical Assistance).
TOFI20141218003
A Finnish company has developed a video distribution system, that can
distribute uncompressed 4K ultra high definition and 3D video with bidirectional control data over single standard Cat5e/6 cabling. The system
greatly simplifies video distribution in for example public transport and
digital signage applications both indoors and outdoors. The company is
looking for license agreements, or technical cooperation or joint venture
agreements from companies interested in the system.
TOSK20150109001
Laboratory heat press is a unique device developed by established Slovak
research institute. The device enables preparation of dense ceramic and other
materials by sintering of powders. Manufacturing process is rapid,
economical, highly efficient and suitable even for smaller laboratories.
Energy savings up to 77% per sample are guaranteed. Partners are sought for
acquisition and/or licensing agreement.
TODE20150131001
A German consortium, consisting of two SME and a research group from a
university of technology, has developed the material and the technology for
high performance textile-reinforced asphalt plates which can be used and
multiple reused for temporary outdoor traffic areas and for indoor floorings.
The consortium is searching for industrial partners for commercial agreement
with technical assistance or for technical cooperation agreement.
11 DE 1592 3N4U
A German research institute has developed a measuring system for the
determination of the effects of cavitation. Ultrasonic cleaning system is used
in increasing extent in the last years for several applications like cleaning of
cast parts, injection needles and surgical instruments. The newly developed
measuring device offers a novel system to determine quantitatively the
cleaning efficiency of those systems.
The research institute is searching for licensees.
TOPL20140804001
Polish university has invented a computer application for complex analysis
of mass spectrum. It is an application that converts data from mass spectrum
received from patients with cancer. It may help with early diagnosing of
patients. The university seeks partners to sign a licence agreement, or
technical cooperation agreement or services agreement.