Module One Review
Please print this study guide prior to participating in the Module One Review Session.
Slide Two: [1.02]
List the three undefined terms of Geometry
Slide Three: [1.02]
Please note that in the figure above lines AB and CD lie on plane G.
1. Name plane G in a different way.
2. What is the intersection of plane G and line EF?
3. Which line is non-coplanar to plane G?
4. Name 3 collinear points on plane G?
5. Could points F, O, D be coplanar?
Slide Four:[1.04]
Find the length of segment BF.
Slide Five:[1.05]
Recall the distance formula:
Recall the midpoint formula:
Find the distance and the midpoint between the points (-2,4) and (0,6)
Slide Six:[1.05]
M is the midpoint of segment AB. Find the coordinates of B given A(-1,4) and M(3,-2).
Slide Seven:[1.04]
Given that B is the midpoint of AC. AB = 7x + 12 BC = 9x - 2 find AC
Slide Eight:[1.07]
Match the name with the appropriate picture.
Slide Nine:[1.08]
Given that ray BE bisects < ABC find r.
Slide Ten:[1.09]
Eliminate the equations that are not applicable.
1. 180 = 120 + 5x – 10
2. 5x – 10 = 60
3. 5x – 10 = 120
4. 5x – 10 = 90
Slide Eleven:[1.09]
Find the value of < ABC
Slide Twelve:
Use this space to write down any questions you may have so you won’t forget, or you can
take notes on here based on the questions asked by your classmates.
Slide Thirteen:
Here are some helpful tips!
1. Make sure to read the questions carefully before you select your final answer.
**Are you being asked for x , for an angle or segment?
2. Do NOT use the “<“ key.. Type out the word instead of using the symbol.
3. Make sure to show your work if the problem specifies (essay questions).
4. Make sure when you start the test you have time to complete it. If you close out of it you will be
locked out and will NOT be able to access it. Teacher re-set will provide you a new test with different
questions.
5. Have Paper, pencil, calculator handy. Be willing to work out your problems on your paper. If needed
draw the given figure and label it.