C.Manikandan,
H4-G.C.T Old Staff Quarters, Cowley Brown Road ,
R.S Puram, Coimbatore-2.
Cell: 9942311297
email: rmadpm@gmail.com
-----------------------------------------------------------------------------------------------------------------------------------------------------------OBJECTIVE
To bond with an ethical and resourceful organization, where there is mutual extraction of skills and grow with
it.
ACADEMIC PERFORMANCE
COURSE
Ph.D
M.E
INSTITUTION
BOARD/
UNIVERSITY
YEAR
Anna University, Chennai.
PERCENTAGE OF MARKS
Pursuing
Anna University
Coimbatore.
Anna University
Coimbatore,
Coimbatore-47
2010
CGPA- 9.13
Coimbatore
Institute Of
Technology,
Coimbatore.
Bharathiyar
University,
Coimbatore.
2001
75.8%
D.M.M
Annamalai
University,
Chidambaram.
Annamalai
university
D.M.E
A.P.A
Polytechnic
College, Palani.
State Board of
Technical
Education, Chennai
1986
C.G.M High
School,
Korikkadavu.
Tamilnadu State
Board Education
1983
[ ENGG DESIGN ]
B.E
S.S.L.C
1993
1
58.5%
56%
74.2%
TEACHING EXPERIENCES:
Institution
Coimbatore Institute
of Engineering and
Technology –
Coimbatore-109.
Karpagam College of
Engg, Coimbatore.
T.R.N Polytechnic
college, Dharapuram.
Designation
Duration
Assistant Professor- III
Assistant Professor
Instructor- Lecturer- Senior
Lecturer- HoD/ Tool & Die
Dept
Years of
Experiences
1.07.2013 To
30.04.2015
1 year 10 months
13.09.2010 To
30.04.2013
2 years and 7
months
12.07.1990 To
08.09.2010
20 years and 2
months
Total years of Experience
24 years
COLLEGE RECORD:
COURSE
:
MASTER OF ENGINEERING [M.E]
DISCIPLINE
:
MECHANICAL ENGINEERING [ENGG DESIGN]
INSTITUTION
:
ANNA UNIVERSITY COIMBATORE
ELECTIVE SUBJECTS
:
1. Advanced Strength of Materials
2. Design of Material Handling Equipments
3. Design of Hydraulics and Pneumatics
4. Rapid Prototyping and Tooling
5. Productivity Management and Reengineering
6. Design of Plastic Parts
PROJECTS UNDER TAKEN
IN THE P.G COURSE
:


CLASS RECORDS
Vibration Analysis on Turning Tool during Hard Turning using FEA PHASE-I
Investigation of Temperature Distribution and Energy Balance on a Turning
Tool during Hard Turning using FEA and Experimental Method - PHASE-II
:



Class Second Rank in the Second Semester.
Class First Rank in the Third Semester.
Class Fourth Rank in the Overall Semesters.
2
COURSE
:
BACHELOR OF ENGINEERING [B.E]
DISCIPLINE
:
MECHANICAL ENGINEERING
INSTITUTION
:
COIMBATORE INSTITUTE OF TECHNOLOGY,
COIMBATORE.
ELECTIVE SUBJECTS
:
PROJECT UNDERTAKEN
IN THE U.G. COURSE




Welding Technology
Hydraulic and Pneumatic and Fluidic Control.
CAD/ CAM
Plant Layout and Material Handling

Multi Machines Multi Jobs [MMM] Scheduling for Optimal
Performance Measures for Job Shop Modeling.


Department First Rank in the Sixth Semester.
Department Fifth Rank in All Over Seven Semesters.
:
CLASS RECORDS
:
COURSE
:
DIPLOMA IN MECHANICAL ENGINEERING
INSTITUTION
:
ARULMIGU PALANIANDAVAR POLYTECHNIC COLLEGE,
PALANI.
ELECTIVE SUBJECTS
PROJECT UNDER TAKEN
IN THE DIPLOMA COURSE
PRESENT POSITION
OF THE POST
:


Automobile Technology-I
Automobile Technology -II

Automatic Fluid Level Controller.
:
:
Have been working as an Assistant professor - III of the
Mechanical Engineering Department in Coimbatore Institute of
Engineering and Technology – Narasipuram - Coimbatore.
3
SUBJECTS HANDLED
:

Manufacturing Process

Machine Design and Drawing

Machine shop Technology

Mechanics of Materials

Design of Machine Elements

CAD/ CAM

Technical Drawing

Refrigeration and Air conditioning

Automobile Technology

Process planning and Cost Estimation

Engineering Graphics

Basics of Engineering

Dynamics of Machinery

Design of Jigs and Fixture

Design of Press Tool

Industrial Engineering and Management

Strength of Materials

Engineering Thermodynamics

Basics of Civil and Mechanical Engg

Thermal engineering

Applied thermodynamics and fluid mechanics [ EIE]
4
RESULTS PRODUCED
:
I have Produced 100% of Result in the following subjects.

Refrigeration and Air Conditioning

Process Planning and Cost Estimation

Technical Drawing

For other Subjects Obtained above 90% of Results.
SEMINAR/ WORKSHOP ATTENDED :

One Day Workshop on “ARC WELDING OF STAINLESS
STEEL” Sponsored by Council for Scientific and Industrial
Research, New Delhi, at C.I.T-Coimbatore.

Two Days National Level Seminar on “FLUID POWER
SYSTEMS” – Sponsored by the AICTE, New Delhi at C.S.I.
Polytechnic College, Salem.

One day workshop on “ Advanced Training on Mitsubishi
Wire EDM” at PSG Institute of Advanced Studies and M/C
Crafts Machinery Pvt Ltd- CBE.

One day Faculty Development Programme on “Flexible
Automation and Robotics” at Sri Subramaniya college of
Engineering- Palani.

“Innovative Engineering Research Practices in
Manufacturing Organizations” – One Day Workshop at
Karpagam College of Engg- Coimbatore.

“Achieving Break through Quality”- one day workshop
conducted by the Indian chamber of commerce and
industry- CBE.

“RECENT TRENDS IN MACHINING” – Two days workshop
held at Amrita Vishwa Vidyapeetham UniversityCoimbatore.
5
PAPERS PRESENDED
:




BOOKS PUBLISHED
:






PROJECT GUIDED
Analyzing Temperature Distribution in Electrochemical
Machining Tool Using Finite Element Analysis.
Object sensing and sorting.
Static Design and Analysis of Cutting Tool Temperature
Using PLC.
Analyzing cutting parameters for Machining EN24 using
Taguchi method.
:
CAD/ CAM
Basic of Mechanical Engineering
Process Planning and Cost Estimation - Lab Manual
Special Machines Workshop - Lab Manual
Lathe and Metrology - Lab Manual
Foundry and Welding – Lab Manual
 UG projects
 Analyzing cutting parameters for
Machining EN24
using Taguchi method
 Analyzing Composite Material for Leaf Spring.
 Experimental investigation and Modal Analysis of
Composite Drive Shaft
 PG projects
 Static design and Analyzing of cutting tool temperature
using PLC
 Object Sensing and Sorting.
 Design analysis of Base Bleed in Automobile.
OTHER WORKS CONTRIBUTION:









Co-coordinator for the Magma – 2011 Function
Syllabus Revision Committee Member
NBA- Accreditation work
NAAC- Co-ordinator - Department
Class Advisor Duty
Chair Person for the Paper Presentation
Judge for the Tamil debate
Co-ordinator for the international conference.
Department Association Function
6
PERSONAL DETAILS :
Father’s name
:
Thiru T. Chinnachamy
Mother’s name
:
Tmt C. kaliammal
Occupation
:
Agriculturist
Date of Birth
: 25th February 1968
Sex
: Male
Nationality
: Indian
Community
:
Mother Tongue
: Tamil
Language of Proficiency
:
Hobbies
:
o
o
o
o
B.C, [Hindu- Agamudaiyar]
English, Tamil.
Writing Lyrics
Reading Technical magazine, Lyrics and Novel
Playing Carom and Chess
Listening Music
I hereby declare that all the details and particulars furnished above are correct to the best of my
knowledge and belief.
Date:
Place: Coimbatore
Yours faithfully
[ MANIKANDAN.C]
7